RESEARCH ON THE STABILITY OF DOUBLE-SKIN MULTI-CAVITY COMPOSITE WALL WITH STEEL TRUSS UNDER AXIAL COMPRESSION

HE Yunfei; SHU Ganping; ZHOU Guangen; QIN Ying; ZHOU Xiongliang

doi:10.13204/j.gyjz202003002

Volume 50 Issue 3

Mar. 2020

Turn off MathJax

Article Contents

Abstract

References

Article Navigation > INDUSTRIAL CONSTRUCTION > 2020 > 50(3): 8-12

Guo Lei, Lu Tongwei, Gu Qiang, Liu Zhiguo. PROPERTIES AND ENGINEERING APPLICATIONS OF GROUTING MATERIAL PREPARED WITH HIGH -PERFORMANCE GROUTING ADMIXTURE[J]. INDUSTRIAL CONSTRUCTION, 2007, 37(9): 93-96. doi: 10.13204/j.gyjz200709021

Citation:

HE Yunfei, SHU Ganping, ZHOU Guangen, QIN Ying, ZHOU Xiongliang. RESEARCH ON THE STABILITY OF DOUBLE-SKIN MULTI-CAVITY COMPOSITE WALL WITH STEEL TRUSS UNDER AXIAL COMPRESSION[J]. INDUSTRIAL CONSTRUCTION, 2020, 50(3): 8-12. doi: 10.13204/j.gyjz202003002

Citation:

PDF( 3285 KB)

RESEARCH ON THE STABILITY OF DOUBLE-SKIN MULTI-CAVITY COMPOSITE WALL WITH STEEL TRUSS UNDER AXIAL COMPRESSION

doi: 10.13204/j.gyjz202003002

1. Zhejiang Southeast Space Frame Group Company Limited, Hangzhou 311209, China;
2. School of Civil Engineering, Southeast University, Nanjing 211189, China

Received Date: 2019-10-26

Abstract

Abstract

The double-skin multi-cavity composite wall consists of two external steel plates and infilled concrete. Mechanical connectors are used to enhance the composite action between the two materials. In the paper, a new truss connector was proposed, which can effectively delay the buckling of the steel plate and improve the overall performance of the wall. The ANSYS finite element software was used to simulate the wall performance, and the validity of the finite element model was verified by comparing the experimental data. Parametric analysis was carried out to study the influence of key parameters such as steel plate thickness, truss spacing and wall height-thickness ratio on the wall performance. The results showed that increasing the thickness of the steel plate could delay the buckling of the steel plate and increase the bearing capacity of the wall; increasing the truss spacing would reduce the restraining effect of the truss on the steel plate and the bearing capacity of the wall; changing the height-thickness ratio of the wall would affect the failure mode of the wall.
- double-skin multi-cavity composite wall with steel truss,
- axial compressive performance,
- stability,
- numerical simulation

FullText(HTML)

References(12)

References

武晓东,童乐为. 带方钢管混凝土端柱隔板连接双钢板-混凝土组合剪力墙抗震性能试验研究[J]. 建筑结构学报,2019,40(12):41-50.

李健,李户晓,王冬冬,等. 双钢板组合剪力墙施工应力实测与分析[J]. 建筑钢结构进展,2019,21(5):13-19.

夏登荣,陈丽华,吴晓枫,等. 不同连接构造双钢板混凝土组合剪力墙试验研究[J]. 建筑结构,2019,49(14):36-41

,79.

马晓伟,聂建国,陶慕轩. 钢板-混凝土组合剪力墙正常使用阶段有效刚度[J]. 土木工程学报,2014,47(7):18-26.

李健,罗永峰,郭小农,等. 双层钢板组合剪力墙抗震性能试验研究[J]. 同济大学学报(自然科学版),2013,41(11):1636-1643.

RAFIEI S, HOSSAIN K M A, LACHEMI M, et al. Finite Element Modeling of Double Skin Profiled Composite Shear Wall System Under In-Plane Loadings[J]. Eng Struct, 2013,56:46-57.

李盛勇,聂建国,刘付钧,等. 外包多腔钢板-混凝土组合剪力墙抗震性能试验研究[J]. 土木工程学报,2013,46(10):26-38.

蔡健,段伟宁,汤序霖,等. 轴压比与剪跨比对带约束拉杆双层钢板-混凝土组合剪力墙抗震性能影响研究[J]. 建筑结构学报,2018,39(2):37-43.

李宁,胡红松,方膨膨,等. 双钢板-混凝土组合剪力墙中钢板局部稳定性能有限元分析[J]. 建筑结构学报,2017,38(增刊1):112-117.

纪晓东,蒋飞明,钱稼茹,等. 钢管-双层钢板-混凝土组合剪力墙抗震性能试验研究[J]. 建筑结构学报,2013,34(6):75-83.

QIN Y, SHU G P, ZHOU G G, et al. Truss Spacing on Innovative Composite Walls Under Compression[J]. J. Constr. Steel Res, 2019,160:1-15.

中华人民共和国住房和城乡建设部. 混凝土结构设计规范:GB 50010-2010[S]. 北京:中国建筑工业出版社, 2010.

Relative Articles

[1]	XU Wenjing, HOU Xingmin, LI Junhai, WU Jinhao, LI Junming, WANG Feng. Stability Analysis of Masonry Air-Raid Shelters Based on the Unloading Arch Theory and Finite Element Simulations[J]. INDUSTRIAL CONSTRUCTION, 2025, 55(2): 240-245. doi: 10.3724/j.gyjzG22111905
[2]	FANG Xiaojun, LI Junxi, ZHOU Yun, SONG Jian. Experimental and Numerical Studies on Axially-loaded Mechanical Properties of Tuned-Mass Type Composite Columns[J]. INDUSTRIAL CONSTRUCTION, 2025, 55(2): 177-186. doi: 10.3724/j.gyjzG24091401
[3]	YUE Xianghua, LONG Yueling, JIANG Yujie, LI Wentao, CAI Jian. Axial Compressive Performance and Constitutive Model of CFST Columns with an Inner FRP Tube[J]. INDUSTRIAL CONSTRUCTION, 2024, 54(6): 177-189. doi: 10.3724/j.gyjzG24041713
[4]	ZHANG Peng, YANG Siqi, DENG Yu, NI Miao, LING Daoyuan. Research on Mechanical Properties of Bamboo Winding Composite Pipe Reinforced Thin-Walled Steel Tube Composite Structures Under Axical Compression[J]. INDUSTRIAL CONSTRUCTION, 2024, 54(7): 62-68. doi: 10.3724/j.gyjzG23010801
[5]	LI Xinjie, WANG Weiyong. Research on Mechanical Properties of Concrete-Filled Double-Skin Circular Steel Tubular Columns Stiffened by Perforated Steel Plates Under Axial Compression[J]. INDUSTRIAL CONSTRUCTION, 2024, 54(7): 1-12. doi: 10.3724/j.gyjzG23071702
[6]	HE Kaixuan, LI Aiqun, YANG Cantian. Numerical Simulation Study on the Mechanical Properties and Structural Seismic Response Control Characteristics of Double-Stage-Yield Annular Steel Plate Shear Dampers[J]. INDUSTRIAL CONSTRUCTION, 2023, 53(9): 104-110. doi: 10.13204/j.gyjzG23051114
[7]	YUAN Minzhe, XIA Caichu, WANG Xingkai. Safety Diagnosis of a Flood Control Wall in Shanghai[J]. INDUSTRIAL CONSTRUCTION, 2023, 53(2): 218-223. doi: 10.13204/j.gyjzG21100402
[8]	ZHANG Ying, WANG Rui, ZHAO Hui, AN Guoqing. Mechanical Properties of Octagonal Hollow Concrete Filled Steel Tube Short Columns Under Axial Compression[J]. INDUSTRIAL CONSTRUCTION, 2022, 52(5): 113-119. doi: 10.13204/j.gyjzG20122411
[9]	LIU Yangbing, WANG Shuang, LIU Jingbo, CAO Tianfeng. Experimental Research on Effect of Shear Connectors on Mechanical Properties of Steel-Plate Concrete Composite Walls Under Axial Compression[J]. INDUSTRIAL CONSTRUCTION, 2022, 52(4): 98-106. doi: 10.13204/j.gyjzG20081704
[10]	SUN Xin, WANG Junjie, ZHAO Yong, WANG Wei. Numerical Analysis of Joint of Composite Beam and Rectangular Steel Tube Under Progressive Collapse Condition[J]. INDUSTRIAL CONSTRUCTION, 2022, 52(5): 140-146. doi: 10.13204/j.gyjzG20100803
[11]	WANG Jingfeng, ZHANG Rong, WANG Wanqian, LIU Chao, ZHANG Huijie, WANG Can. EXPERIMENTS AND CALCULATION METHODS ON PERFORMANCE OF PREFABRICATED COLD-FORMED STEEL (CFS) COMPOSITE WALLS FILLED WITH LIGHT MORTAR UNDER AXIAL COMPRESSION[J]. INDUSTRIAL CONSTRUCTION, 2021, 51(8): 99-105. doi: 10.13204/j.gyjzG20072110
[12]	PANG Rui, DING Shusu, WANG Lu, WANG Yixiao, WANG Wenjie. FINITE ELEMENT ANALYSIS OF AXIAL COMPRESSION PROPERTIES OF PREFABRICATED SRCT SHEAR WALL STRUCTURES[J]. INDUSTRIAL CONSTRUCTION, 2020, 50(9): 156-162. doi: 10.13204/j.gyjzG19112401
[13]	YAN Renzhang, WAN Liyuan, ZHOU Jianting, WANG Shuai. STRUCTURAL DESIGN AND STABILITY ANALYSIS OF A COMPOSITE SPACE STRUCTURE COMPOSED OF CABLE-SUPPORTED ARCH TRUSS AND SINGLE-LAYER RETICULATED SHELL[J]. INDUSTRIAL CONSTRUCTION, 2020, 50(4): 103-110. doi: 10.13204/j.gyjz202004019
[14]	CHEN Weigang, ZHANG Huikai, ZHOU Xiongliang, SHU Ganping, ZHOU Guangen, QIN Ying. RESEARCH ON SEISMIC BEHAVIOR OF CONNECTIONS BETWEEN DOUBLE-SKIN MULTI-CAVITY OF COMPOSITE WALL WITH STEEL TRUSS AND H-SHAPED STEEL BEAM[J]. INDUSTRIAL CONSTRUCTION, 2020, 50(3): 19-23,28. doi: 10.13204/j.gyjz202003004
[15]	DU Erfeng, ZHOU Xiongliang, QIN Le, HE Yunfei, SHU Ganping, ZHOU Guangen. EXPERIMENTAL RESEARCH ON FIRE RESISTANCE OF DOUBLE-SKIN MULTI-CAVITY COMPOSITE WALL WITH STEEL TRUSS EXPOSED TO ONE-SIDE FIRE[J]. INDUSTRIAL CONSTRUCTION, 2020, 50(3): 24-28. doi: 10.13204/j.gyjz202003005
[16]	ZHOU Xiongliang, SHU Ganping, ZHOU Guangen, LIU Zhonghua, HE Yunfei, LUO Kerong. EXPERIMENTAL RESEARCH ON THE MECHANICAL PROPERTIES OF SHORT DOUBLE-SKIN MULTI-CAVITY COMPOSITE WALL WITH STEEL TRUSS UNDER AXIAL COMPRESSION[J]. INDUSTRIAL CONSTRUCTION, 2020, 50(3): 1-7,12. doi: 10.13204/j.gyjz202003001
[17]	Wang Hui, Li Xiaoyan, Sun Qing, Xue Jianyang. EXPERIMENTAL RESEARCH ON OVERALL STABILITY BEARING CAPACITY OF HIGH STRENGTH STEEL TUBE COMPONENTS[J]. INDUSTRIAL CONSTRUCTION, 2014, 44(11): 145-149. doi: 10.13204/j.gyjz2001411029
[18]	Wang Dengfeng, Wang Yuanqing, Fang Bin, Shi Yongjiu, Dai Haijin. STABILITY OF AN EXTRA WIDE COLUMN COMPOSED OF DOUBLE LIMBS IN ELECTROSTATIC PRECIPITATOR UNDER AXIAL COMPRESSION[J]. INDUSTRIAL CONSTRUCTION, 2013, 43(12): 156-161. doi: 10.13204/j.gyjz201312029
[19]	Deng Changgen, Zhu Wenmei. SIMPLIFIED BUCKLING ANALYSIS OF STEEL COMPRESSION MEMBERS STRENGTHENED WITH CFRP[J]. INDUSTRIAL CONSTRUCTION, 2008, 38(3): 106-108122. doi: 10.13204/j.gyjz200803028
[20]	Chen Ting, Tong Genshu. ELASTOPLASTIC STABILITY OF TAPERED COMPRESSED MEMBERS[J]. INDUSTRIAL CONSTRUCTION, 2004, 34(10): 62-65,84. doi: 10.13204/j.gyjz200410019

Supplements(0)

Cited By

Cited by

Periodical cited type(5)

1.	翁维素，呼树铅，刘铂. 钢夹板—CLT组合剪力墙轴压性能研究. 低温建筑技术. 2024(12): 45-49 .
2.	舒赣平，姚震. 江苏省装配式钢结构建筑的技术发展现状与方向. 江苏建筑. 2023(01): 7-12 .
3.	曾衍衍，黄炎生，石逸凡. 新型外包钢板内置钢筋桁架混凝土组合剪力墙抗震性能参数分析. 广东土木与建筑. 2023(04): 51-55 .
4.	孙翔，裴笑莹，杨雨青，王喆，牟在根. 双层钢板-内填混凝土组合剪力墙整体稳定性分析. 建筑结构. 2023(10): 40-46 .
5.	游业刚，李健，王腾，黄立朋，高岗. 双钢板组合剪力墙轴压性能研究综述. 钢结构(中英文). 2022(08): 1-8 .