EXPERIMENT STUDY OF COMPOSITE WALL BOARDS WITH GFRP FACE SHEETS AND A PAULOWNIA WOOD CORE

Yang Shulan; Liu Weiqing; Fang Hai; Wang Lu

doi:10.13204/j.gyjz201410007

Volume 44 Issue 10

Jan. 2015

Turn off MathJax

Article Contents

Abstract

References

Article Navigation > INDUSTRIAL CONSTRUCTION > 2014 > 44(10): 30-35

Yang Shulan, Liu Weiqing, Fang Hai, Wang Lu. EXPERIMENT STUDY OF COMPOSITE WALL BOARDS WITH GFRP FACE SHEETS AND A PAULOWNIA WOOD CORE[J]. INDUSTRIAL CONSTRUCTION, 2014, 44(10): 30-35. doi: 10.13204/j.gyjz201410007

Citation:

Yang Shulan, Liu Weiqing, Fang Hai, Wang Lu. EXPERIMENT STUDY OF COMPOSITE WALL BOARDS WITH GFRP FACE SHEETS AND A PAULOWNIA WOOD CORE[J]. INDUSTRIAL CONSTRUCTION, 2014, 44(10): 30-35. doi: 10.13204/j.gyjz201410007

Citation:

PDF( 0 KB)

EXPERIMENT STUDY OF COMPOSITE WALL BOARDS WITH GFRP FACE SHEETS AND A PAULOWNIA WOOD CORE

doi: 10.13204/j.gyjz201410007

Publish Date: 2014-10-30

Abstract

Abstract

A simple and innovative composite panel with GFRP face sheets and a paulownia wood core，manufactured by vacuum assisted resin infusion process，was developed． These panels could be employed in the civil engineering due to their advantages of low cost，high strength to weight ratios and convenient usage． An experimental study was carried out to validate the effectiveness of this panel． Three full-scale specimens with different height /thickness ratio were tested under in-plane axial compression loading． Experiments show that the ultimate loading capacity is increased with the composite wall thickness ratio decreases and failure mode is instability failure．
- new wall board material,
- sandwich structure,
- vacuum infusion,
- paulownia wood,
- bearing capacity

FullText(HTML)

References(0)

References

Relative Articles

[1]	XUE Weichen, ZHANG Baozheng, CHEN Shengyang, JIANG Jiafei, GUO Dapeng. State of the Art on Mechanical Properties of Precast Prestressed Concrete Structures (for Buildings and Utility Tunnels)[J]. INDUSTRIAL CONSTRUCTION, 2024, 54(10): 9-20. doi: 10.3724/j.gyjzG24100801
[2]	ZHANG Yufen, ZHANG Yan, JIA Hongxin. Analysis and Calculations for Bearing Capacity of New Composite CFST Pier Columns Under Axial Compression[J]. INDUSTRIAL CONSTRUCTION, 2022, 52(12): 128-135,155. doi: 10.13204/j.gyjzG21020601
[3]	FANG Zhi, JIN Yin, GUO Funeng, ZHANG Dingfang, MO Chaoqing, HUANG Shang. EXPERIMENTAL RESEARCH ON MECHANICAL PROPERTIES OF ASSEMBLED MONOLITHIC CONCRETE UTILITY TUNNELS[J]. INDUSTRIAL CONSTRUCTION, 2021, 51(7): 47-56. doi: 10.13204/j.gyjzG20061104
[4]	SHU Xingping, CHI Chen. FINITE ELEMENT ANALYSIS OF THREE-POINT BENDING MECHANICAL PROPERTIES FOR STAINLESS STEEL SANDWICH PANEL WITH CORE TUBES[J]. INDUSTRIAL CONSTRUCTION, 2020, 50(2): 34-39. doi: 10.13204/j.gyjz202002005
[5]	LI Guochang, SONG Chengxi, YANG Zhijian. FINITE ELEMENT ANALYSIS ON BEARING PERFORMANCES OF A NEW CONNECTION FOR PREFABRICATED FLOOR SLABS AND STEEL BEAMS[J]. INDUSTRIAL CONSTRUCTION, 2020, 50(12): 126-134. doi: 10.13204/j.gyjzG20051107
[6]	SHU Xingping, WEI Mingguang, TAN Yongqiang. FINITE ELEMENT ANALYSIS OF AXIAL COMPRESSION PERFORMANCE FOR L-SHAPED COLUMN MADE OF STAINLESS STEEL SANDWICH PANEL WITH CORE TUBES[J]. INDUSTRIAL CONSTRUCTION, 2020, 50(2): 40-44,50. doi: 10.13204/j.gyjz202002006
[7]	SHU Xingping, HUANG Muxing, XIANG Mengjie. EXPERIMENTAL RESEARCH ON LATERAL COMPRESSIVE PROPERTIES FOR THE STRUCTURE OF STAINLESS STEEL SANDWICH PANEL[J]. INDUSTRIAL CONSTRUCTION, 2020, 50(2): 17-23. doi: 10.13204/j.gyjz202002003
[8]	WANG Chaohua, ZHAO Guifeng, YI Yunping, ZHANG Meng. EXPERIMENTAL RESEARCH ON BEARING CAPACITY OF INTERSECTING JOINTS OF SUBSTATION FRAMEWORKS WITH LIGHTNING RODS[J]. INDUSTRIAL CONSTRUCTION, 2020, 50(6): 150-155. doi: 10.13204/j.gyjz202006024
[9]	Gao Yifeng, Zhao Qilin, Ma Sen, Xu Longxing, Tao Jie. STUDIES ON CONNECTION MODES OF SANDWICH COMPOSITE T-JOINTS[J]. INDUSTRIAL CONSTRUCTION, 2014, 44(10): 36-39. doi: 10.13204/j.gyjz201410008
[10]	Sun Huiming, Fang Hai, Zhu Lu, Liu Weiqing, Xu Chao. EXPERIMENTAL AND THEORETICAL STUDY OF COMPOSITE SANDWICH COLUMN UNDER AXIAL COMPRESSION[J]. INDUSTRIAL CONSTRUCTION, 2014, 44(02): 59-63. doi: 10.13204/j.gyjz201402014
[11]	Yang Qi’an, Shen Baohan. THE BEARING MECHANISM AND CALCULATION METHOD OF BEARING CAPACITY OF SCREW PILE[J]. INDUSTRIAL CONSTRUCTION, 2013, 43(1): 67-70. doi: 10.13204/j.gyjz201301015
[12]	Han Junke, Yang Jingbo, Yang Fengli, Li Zhenbao. STUDY ON BEARING CAPACITY OF REINFORCED AND STRENGTHENED TRANSMISSION TOWER[J]. INDUSTRIAL CONSTRUCTION, 2010, 40(7): 114-117,131. doi: 10.13204/j.gyjz201007028
[13]	Long Yueling, Cai Jian, Huang Yansheng. ULTIMATE CAPACITY OF AXIALLY-LOADED RECTANGULAR CFT STUB COLUMNS[J]. INDUSTRIAL CONSTRUCTION, 2010, 40(7): 95-99. doi: 10.13204/j.gyjz201007024
[14]	Lu Fangwei, Yang Weixing, Wang Xun. STUDIES ON BEARING CAPACITY OF CONCRETE FILLED UNEQUAL THICKNESS WALLED RECTANGULAR STEEL TUBE SUBJECTED TO PURE BENDING[J]. INDUSTRIAL CONSTRUCTION, 2010, 40(10): 122-125. doi: 10.13204/j.gyjz201010027
[15]	Yang Junjie, Gao Zijun, Wu Zuxian. EXPERIMENTAL STUDY OF CONCRETE-FILLED DOUBLE SKIN STEEL TUBULAR COLUMNS WITH OCTAGON SECTION UNDER ECCENTRIC LOADS[J]. INDUSTRIAL CONSTRUCTION, 2009, 39(3): 116-118,35. doi: 10.13204/j.gyjz200903030
[16]	Yu Feng, Wu Ping. STUDY OF BEHAVIOR OF NEWCOMPOSITE STRUCTURAL COLUMN[J]. INDUSTRIAL CONSTRUCTION, 2009, 39(2): 97-99. doi: 10.13204/j.gyjz200902016
[17]	Huang Hong, Tao Zhong, . FLEXURAL BEHAVIOR OF CONCRETE FILLED DOUBLE-SKIN (CHS INNER AND CHS OUTER) STEEL TUBES[J]. INDUSTRIAL CONSTRUCTION, 2006, 36(11): 15-18,61. doi: 10.13204/j.gyjz200611004
[18]	Yu Haijun. SOME EXPLORATIONS OF THE CALCULATION OF THE BEARING CAPACITY OF THE COMPRESSION MASONRY STRUCTURAL MEMBERS[J]. INDUSTRIAL CONSTRUCTION, 2005, 35(11): 88-89,59. doi: 10.13204/j.gyjz200511026
[19]	Tao Zhong, Han Linhai, Zheng Yongqian, Huang Hong. FLEXURAL BEHAVIORS OF CONCRETE-FILLED DOUBLE-SKIN (CHS INNER AND SHS OUTER)STEEL TUBES[J]. INDUSTRIAL CONSTRUCTION, 2004, 34(1): 6-9,5. doi: 10.13204/j.gyjz200401002
[20]	Chen Lun, Wang Haiyan, Shen Baohan, He Dexin, Sun Junping. FULL-SCALE TEST STUDY ON BEARING MECHANISM AND LOAD TRANSMISSION MODE OF DX PILES CAST-IN-SITU[J]. INDUSTRIAL CONSTRUCTION, 2004, 34(3): 5-8. doi: 10.13204/j.gyjz200403002