FAILURE MECHANISM OF TIMBER COLUMN CONFINED WITH FRP UNDER THE EFFECT OF FRACTURED TEXTURE

Li Lang; Dong Jiangfeng; Wang Qingyuan; Yuan Shilei

doi:10.13204/j.gyjz201410006

Volume 44 Issue 10

Jan. 2015

Turn off MathJax

Article Contents

Abstract

References

Article Navigation > INDUSTRIAL CONSTRUCTION > 2014 > 44(10): 25-29

Li Lang, Dong Jiangfeng, Wang Qingyuan, Yuan Shilei. FAILURE MECHANISM OF TIMBER COLUMN CONFINED WITH FRP UNDER THE EFFECT OF FRACTURED TEXTURE[J]. INDUSTRIAL CONSTRUCTION, 2014, 44(10): 25-29. doi: 10.13204/j.gyjz201410006

Citation:

Li Lang, Dong Jiangfeng, Wang Qingyuan, Yuan Shilei. FAILURE MECHANISM OF TIMBER COLUMN CONFINED WITH FRP UNDER THE EFFECT OF FRACTURED TEXTURE[J]. INDUSTRIAL CONSTRUCTION, 2014, 44(10): 25-29. doi: 10.13204/j.gyjz201410006

Citation:

PDF( 0 KB)

FAILURE MECHANISM OF TIMBER COLUMN CONFINED WITH FRP UNDER THE EFFECT OF FRACTURED TEXTURE

doi: 10.13204/j.gyjz201410006

Publish Date: 2014-10-30

Abstract

Abstract

Six timber short columns were reinforced by wrapping different layers of single or hybrid CFRP and AFRP sheets of which a column without any knags and one with knags were picked as contrast specimens． The axial compressive behavior of the columns was analyzed，including the ultimate carrying capacity，the load-deformation and load-strain curves． It was also observed the shape features of the faiure section． The test results show that the axial compressive ultimate bearing capacity and stiffness of the short columns are decreased by about 23% and 60% due to the existence of knags，which are improved obviously afte reinforcing the columns by FＲP sheets． The comparison of the load-strain curve shows that the transverse strain near the knag is much higher than that far from the knag．Radial cracks were found on the failure section and fibers near the cracks are compressed to yield．
- fiber reinforced plastic,
- reinforcement,
- timber columns,
- axial compression

FullText(HTML)

References(0)

References

Relative Articles

[1]	JING Denghu, HU Songtao, QIAO Dun. Experimental Research on Size Effects of Brick Masonry Columns Reinforced with and Without External Angle Steel Under Axial Compression[J]. INDUSTRIAL CONSTRUCTION, 2024, 54(12): 246-253. doi: 10.3724/j.gyjzG23120709
[2]	WANG Yuhao, LIU Degui, WANG Ning, MA Jingjing. Experimental Research on Mechanical Properties of Prestressed Steel-timber Circular Column Under Axial Compression[J]. INDUSTRIAL CONSTRUCTION, 2022, 52(1): 39-46. doi: 10.13204/j.gyjzG20061012
[3]	ZHANG Qian, DU Caixia, ZHANG Peng, CAI Jianguo, FENG Jian. RESEARCH ON AXIAL COMPRESSION PERFORMANCE OF 3D PRINTED CONCRETE WALL[J]. INDUSTRIAL CONSTRUCTION, 2021, 51(6): 36-41,94. doi: 10.13204/j.gyjzG20121501
[4]	Xiao Yan, Feng Li, LüXiaohong, She Liyong, Shen Yali. EXPERIMENTAL STUDIES OF GLUBAM COLUMNS UNDER AXIAL LOADS[J]. INDUSTRIAL CONSTRUCTION, 2015, 45(4): 13-17. doi: 10.13204/j.gyjz201504003
[5]	Cheng Donghui, Wang Li Yu, Yannan. EXPERIMENT OF AXIAL COMPRESSION OF REINFORCED CONCRETE SHORT SQUARE-COLUMNS STRENGTHENED WITH PRESTRESSED CFRP SHEETS[J]. INDUSTRIAL CONSTRUCTION, 2013, 43(1): 49-54. doi: 10.13204/j.gyjz201301012
[6]	Shi Gang, Lin Cuocuo, Wang Yuanqing, Shi Yongjiu. EXPERIMENTAL STUDY ON LOCAL BUCKLING OF HIGH STRENGTH STEEL SQUARE BOX SECTION STUB COLUMNS UNDER AXIAL COMPRESSION[J]. INDUSTRIAL CONSTRUCTION, 2012, 42(1): 18-25,36. doi: 10.13204/j.gyjz201201004
[7]	Ouyang Yu, Wang Wei, Gong Yong, Liu Neng-ke. THE ULTIMATE LOAD-BEARING CAPACITY OF TIMBER COLUMNS STRENGTHENED WITH CFRP UNDER ECCENTRIC LOAD[J]. INDUSTRIAL CONSTRUCTION, 2012, 42(10): 146-149. doi: 10.13204/j.gyjz201210030
[8]	Gong Yongzhi, Zhang Jiwen, Jiang Lizhong, Tu Yongming. EXPERIMENTAL RESEARCH OF THE AXIAL COMPRESSION CONCRETE COLUMNS REINFORCED WITH CFRP[J]. INDUSTRIAL CONSTRUCTION, 2010, 40(7): 67-70. doi: 10.13204/j.gyjz201007018
[9]	Shi Gang, Liu Zhao, Ban Huiyong, Zhang Yong, Shi Yongjiu, Wang Yuanqing. STUDY ON THE STABILITY DESIGN METHOD OF HIGH STRENGTH STEEL ANGLE MEMBERS UNDER AXIAL COMPRESSION[J]. INDUSTRIAL CONSTRUCTION, 2009, 39(6): 18-21. doi: 10.13204/j.gyjz200906004
[10]	Guo Zhanggen, Cao Shuangyin, Wang Anbao, Sun Weimin, Han Baoquan. EXPERIMENTAL STUDY AND BEARING CAPACITY ANALYSIS OF RC TWO-WAY SLABS STRENGTHENED WITH FRP STRIPS[J]. INDUSTRIAL CONSTRUCTION, 2009, 39(8): 20-24,19. doi: 10.13204/j.gyjz200908006
[11]	Yi WeiJian, Li Peng. FINITE ELEMENT ANALYSIS OF UNIAXIAL COMPRESSION FRP-CONFINED SQUARE COLUMN SECTION STRESS DISTRIBUTION[J]. INDUSTRIAL CONSTRUCTION, 2008, 38(3): 84-89. doi: 10.13204/j.gyjz200803023
[12]	Zhu Lei, Xu Qingfeng. EXPERIMENTAL RESEARCH ON BEHAVIOR OF CFRP-REINFORCED TIMBER COLUMNS[J]. INDUSTRIAL CONSTRUCTION, 2008, 38(12): 113-116. doi: 10.13204/j.gyjz200812030
[13]	Xu Jin, Cai Jian. RESEARCH ON THE BEHAVIOUR OF REINFORCED CONCRETE COLUMN STRENGTHENED BY CIRCULAR STEEL JACKETING SUBJECTED TO ECCENTRIC LOADING[J]. INDUSTRIAL CONSTRUCTION, 2007, 37(8): 14-17. doi: 10.13204/j.gyjz200708004
[14]	Xu Qingfeng, Zhu Lei. STATE -OF -THE -ART OF WOOD STRUCTURE STRENGTHENED WITH FRP[J]. INDUSTRIAL CONSTRUCTION, 2007, 37(9): 104-108. doi: 10.13204/j.gyjz200709024
[15]	Xu Han-yong, . THE INFLUENCE OF THE STIFFNESS OF CROSS DIRECTION SUPPORT ON THE STABILITY OF CENTRALLY COMPRESSED STEEL TUBE[J]. INDUSTRIAL CONSTRUCTION, 2006, 36(10): 72-74. doi: 10.13204/j.gyjz200610020
[16]	Zheng Yun, Ye Lieping, . PROGRESS IN RESEARCH ON STEEL STRUCTURES STRENGTHENED WITH FRP[J]. INDUSTRIAL CONSTRUCTION, 2005, 35(8): 20-25,34. doi: 10.13204/j.gyjz200508005
[17]	Xie Qun, Lu Zhoudao, Yu Jiangtao. RESEARCH ON PROBLEMS OF REINFORCED CONCRETE STRUCTURES STRENGTHENEDWITH PRESTRESSED FRP[J]. INDUSTRIAL CONSTRUCTION, 2005, 35(7): 93-95. doi: 10.13204/j.gyjz200507027
[18]	Pan Jinglong, Hu Zhongjun, Xu Tian. STABLE BEARING CAPACITY EXPERIMENTAI STUDY OF THE AXIAL-COMPRESSION REINFORCED CONCRETE SLENDER COLUMNS CONFINED BY FIBER REINFORCED PLASTIC[J]. INDUSTRIAL CONSTRUCTION, 2005, 35(9): 24-28. doi: 10.13204/j.gyjz200509007
[19]	Ma Jianxun, Hu Ping, Jiang Xiangmin, Hu Ming. EXPERIMENTAL RESEARCH ON AXIAL COMPRESSIVE BEHAVIORS FOR TIMBER COLUMN STRENGTHENED WITH CFRP[J]. INDUSTRIAL CONSTRUCTION, 2005, 35(8): 40-44,55. doi: 10.13204/j.gyjz200508009
[20]	Li Rong, Teng Jinguang, Yue Qingrui. A NEW TECHNIQUE FOR STRENGTHENING CONCRETE STRUCTURES——NEAR-SURFACE MOUNTED FRP REINFORCEMENT[J]. INDUSTRIAL CONSTRUCTION, 2004, 34(4): 5-10. doi: 10.13204/j.gyjz200404002