EXPERIMENTAL RESEARCH ON THE FLEXURAL PERFORMANCE OF XINJIANG POPLAR BEAMS REINFORCED WITH CARBON FIBER CLOTH

Saierjiang Halike; Liu Yun; Liu Qing; Wang Kexin

doi:10.13204/j.gyjz201410005

Volume 44 Issue 10

Jan. 2015

Turn off MathJax

Article Contents

Abstract

References

Article Navigation > INDUSTRIAL CONSTRUCTION > 2014 > 44(10): 21-24

Saierjiang Halike, Liu Yun, Liu Qing, Wang Kexin. EXPERIMENTAL RESEARCH ON THE FLEXURAL PERFORMANCE OF XINJIANG POPLAR BEAMS REINFORCED WITH CARBON FIBER CLOTH[J]. INDUSTRIAL CONSTRUCTION, 2014, 44(10): 21-24. doi: 10.13204/j.gyjz201410005

Citation:

Saierjiang Halike, Liu Yun, Liu Qing, Wang Kexin. EXPERIMENTAL RESEARCH ON THE FLEXURAL PERFORMANCE OF XINJIANG POPLAR BEAMS REINFORCED WITH CARBON FIBER CLOTH[J]. INDUSTRIAL CONSTRUCTION, 2014, 44(10): 21-24. doi: 10.13204/j.gyjz201410005

Citation:

PDF( 0 KB)

EXPERIMENTAL RESEARCH ON THE FLEXURAL PERFORMANCE OF XINJIANG POPLAR BEAMS REINFORCED WITH CARBON FIBER CLOTH

doi: 10.13204/j.gyjz201410005

Publish Date: 2014-10-30

Abstract

Abstract

The flexural static tests were carried out for 11 rectangular Xinjiang poplar beams，and it was studied bending performance in the tension zone bonded carbon fiber cloth reinforced timber beam，at the same time，their basic mechanical properties，such as water content，tensile strength，compressive strength parallel to grain and local transverse compressive strength were measured． It was verified the plane section assumption and got the relations among failure characteristics of load，ultimate load and load-strain． Test results show that bonding carbon fiber cloth in the beam tension is an effective method to improve the flexural performance of Xinjiang poplar beams．
- Xinjiang poplar beam,
- flexural behavior,
- carbon fiber cloth,
- reinforcement

FullText(HTML)

References(0)

References

Relative Articles

[1]	GE Wenjie, YU Jiamin, GAO Peiqi, SONG Wanrong, QIU Shengwei, CHEN Qiubing, JI Suidong. EXPERIMENTAL RESEARCH ON THE FLEXURAL BEHAVIOR OF FRP REINFORCED ECC-CONCRETE COMPOSITE BEAMS STRENGTHENED WITH CARBON FIBER SHEET[J]. INDUSTRIAL CONSTRUCTION, 2020, 50(2): 163-168. doi: 10.13204/j.gyjz202002025
[2]	Han Xia, Liu Qing, Xu Rui, Shen Hua. EXPERIMENTAL STUDY OF THE INFLUENCE OF BFRP CLOTH U HOOP ON FLEXURAL PROPERTIES OF XINJIANG POPLAR BEAMS[J]. INDUSTRIAL CONSTRUCTION, 2015, 45(6): 43-46. doi: 10.13204/j.gyjz201506009
[3]	Jia Bin, Cheng Jin, Meng Naiqing, Liu Shunfeng. FLEXURAL BEHAVIOR OF CORRODED REINFORCED CONCRETE BEAMS STRENGTHENED WITH CARBON FIBER COMPOSITE SHEETS[J]. INDUSTRIAL CONSTRUCTION, 2013, 43(5): 144-147. doi: 10.13204/j.gyjz201305030
[4]	Saierjiang Halike, Liu Qing, Liu Yun. PRIMARY EXPERIMENTAL STUDY ON THE XINJIANG POPLAR TIMER BEAM FLEXURAL BEHAVIOR[J]. INDUSTRIAL CONSTRUCTION, 2013, 43(8): 75-78,54. doi: 10.13204/j.gyjz201308016
[5]	Zhang Haixia, Kong Dandan, Liu Guorui. EXPERIMENTAL STUDY ON FLEXURAL BEHAVIOR OF CONCRETE BEAMS STRENGTHENED WITH NEAR-SURFACE MOUNTED GFRP BARS[J]. INDUSTRIAL CONSTRUCTION, 2011, 41(10): 20-24. doi: 10.13204/j.gyjz201110005
[6]	Cheng Donghui, Wang Tianfeng, Yi Yamin. THE MECHANICAL BEHAVIOR EXPERIMENT AND ANALYSIS OF CONTINUOUS BEAMS STRENGTHENED WITH CARBON FIBER REINFORCED POLYMER SHEETS[J]. INDUSTRIAL CONSTRUCTION, 2011, 41(10): 25-28,63. doi: 10.13204/j.gyjz201110006
[7]	Zhang Guangtai, Liu Qing, Wang Kexin. BENDING TESTS AND NUMERICAL ANALYSIS OF CFRP STRENGTHENED RC BEAMS[J]. INDUSTRIAL CONSTRUCTION, 2009, 39(8): 80-83. doi: 10.13204/j.gyjz200908021
[8]	Zhang Ke, Ye Lieping, Yue Qingrui. ANALYSIS OF FATIGUE LIFE OF CONCRETE BEAMS REINFORCED WITH PRESTRESSED CFRP SHEETS[J]. INDUSTRIAL CONSTRUCTION, 2008, 38(7): 107-112. doi: 10.13204/j.gyjz200807027
[9]	Mao Xiaofei, Zhao Dong, Chen Ping, Liu Haitao. BEND-RESISTING BEHAVIORS OF LITHOID CULTURAL RELIC REINFORCED WITH CFRP[J]. INDUSTRIAL CONSTRUCTION, 2008, 38(7): 113-115. doi: 10.13204/j.gyjz200807028
[10]	Zhang Ke, . ANALYSIS OF FLEXURAL FAILURE MODE OF RC BEAMS STRENGTHENED WITH CFRP SHEETS[J]. INDUSTRIAL CONSTRUCTION, 2007, 37(4): 81-83. doi: 10.13204/j.gyjz200704022
[11]	Wang Bu, Liu Boquan, Wang Pu. EXPERIMENT ON SEISMIC BEHAVIOR OF CFRP - STRENGTHENED EXTERIOR RC FRAME JOINTS[J]. INDUSTRIAL CONSTRUCTION, 2007, 37(3): 102-105,122. doi: 10.13204/j.gyjz200703025
[12]	Xie Qifang, Zhao Hongtie, Xue Jianyang, Wu Zhaohua. EXPERIMENTAL STUDY ON BENDING BEHAVIOR OF TIMBER BEAMS STRENGTHENED WITH CFRP SHEETS[J]. INDUSTRIAL CONSTRUCTION, 2007, 37(7): 104-107. doi: 10.13204/j.gyjz200707030
[13]	Zhang Ke, . EXPERIMENTAL STUDY ON T-REINFORCED CONCRETE BEAMS STRENGTHENED WITH PRESTRESSED CFRP SHEETS[J]. INDUSTRIAL CONSTRUCTION, 2006, 36(12): 86-89,95. doi: 10.13204/j.gyjz200612024
[14]	Wang Bu, Wang Pu, Xia Chunhong. EXPERIMENTAL INVESTIGATION AND MECHANISM ANALYSIS OF RC BEAM-COLUMN JOINTS SHEAR PERFORMANCE STRENGTHENED AROUND CORE BY CFRP SHEETS[J]. INDUSTRIAL CONSTRUCTION, 2005, 35(7): 29-33,38. doi: 10.13204/j.gyjz200507010
[15]	Tian Shui, Gu Qian. RESEARCH ON FORCED PERFORMANCE OF RC BEAMS STRENGTHENED WITH PRESTRESSED CFRP[J]. INDUSTRIAL CONSTRUCTION, 2005, 35(6): 88-91. doi: 10.13204/j.gyjz200506026
[16]	Ma Jianxun, Jiang Xiangmin, Hu Ping, Hu Ming. EXPERIMENTAL STUDY ON BENDING BEHAVIOUR OF TIMBER BEAMS REINFORCED WITH CFRP SHEETS[J]. INDUSTRIAL CONSTRUCTION, 2005, 35(8): 35-39. doi: 10.13204/j.gyjz200508008
[17]	Ma Jianxun, Hu Ping, Jiang Xiangmin, Hu Ming. EXPERIMENTAL RESEARCH ON AXIAL COMPRESSIVE BEHAVIORS FOR TIMBER COLUMN STRENGTHENED WITH CFRP[J]. INDUSTRIAL CONSTRUCTION, 2005, 35(8): 40-44,55. doi: 10.13204/j.gyjz200508009
[18]	Zhang Ke, Ye Lieping, Yue Qingrui. EXPERIMENTAL STUDY ON FLEXURAL FATIGUE BEHAVIOR OF RC BEAMS STRENGTHENED WITH PRESTRESSED CFRP SHEETS[J]. INDUSTRIAL CONSTRUCTION, 2005, 35(8): 13-19. doi: 10.13204/j.gyjz200508004
[19]	Li Yuan, Zhang Xinghu, Zhang Baoyin, . FATIGUE EXPERIMENTAL STUDY ON CONCRETE BEAM STRENGTHENED WITH CARBON FIBER REINFORCED PLASTIC SHEET[J]. INDUSTRIAL CONSTRUCTION, 2004, 34(4): 22-24,48. doi: 10.13204/j.gyjz200404006
[20]	Wang Zijun, Liu Weiqing, Yao Qiulai, Dai Yunxiang. EXPERIMENTAL RESEARCH ON THE FLEXURAL BEHAVIOR OF RC BEAMS STRENGTHENED BY CARBON FIBER SHEET UNDER QUADRATIC LOADING[J]. INDUSTRIAL CONSTRUCTION, 2004, 34(7): 85-87. doi: 10.13204/j.gyjz200407025