FE ANALYSIS ON LOAD TRANSFER MECHANISM OF BONDED REBARS WITH STEEL SLEEVE CONSIDERING SLIP OF TWO INTERFACES

Shu Ruibin; Zhang Jianrong; Zhang Chun

doi:10.13204/j.gyjz201001023

Volume 40 Issue 1

Dec. 2014

Turn off MathJax

Article Contents

Abstract

References

Article Navigation > INDUSTRIAL CONSTRUCTION > 2010 > 40(1): 92-97

Shu Ruibin, Zhang Jianrong, Zhang Chun. FE ANALYSIS ON LOAD TRANSFER MECHANISM OF BONDED REBARS WITH STEEL SLEEVE CONSIDERING SLIP OF TWO INTERFACES[J]. INDUSTRIAL CONSTRUCTION, 2010, 40(1): 92-97. doi: 10.13204/j.gyjz201001023

Citation:

Shu Ruibin, Zhang Jianrong, Zhang Chun. FE ANALYSIS ON LOAD TRANSFER MECHANISM OF BONDED REBARS WITH STEEL SLEEVE CONSIDERING SLIP OF TWO INTERFACES[J]. INDUSTRIAL CONSTRUCTION, 2010, 40(1): 92-97. doi: 10.13204/j.gyjz201001023

Citation:

PDF( 0 KB)

FE ANALYSIS ON LOAD TRANSFER MECHANISM OF BONDED REBARS WITH STEEL SLEEVE CONSIDERING SLIP OF TWO INTERFACES

doi: 10.13204/j.gyjz201001023

1.
1. East China Architectural Design &Research Institute Co.Ltd,Shanghai 200002,China;
2.
2. Tongji University,Shanghai 200092,China;
3.
3. Shaoxing Highway Management Office,Shaoxing 312000,China

Received Date: 2009-06-12
Publish Date: 2010-01-20

Abstract

Abstract

To study the load transfer mechanism of bonded rebars including slip of two interfaces,the bonded rebars system of steel sleeve was studied by nonlinear FE analysis method.In the bonded rebars system of steel sleeve,because the material of steel sleeve is similar to the one of the steel bar,the bond performance between adhesive and steel bar is similar to the one between adhesive and steel sleeve,so that the bond-slip constitutive relationships of steel-adhesive interface and adhesive-sleeve interface are similar.Therefore,according to the bond-slip constitutive relationship including slip of two interfaces which was formed by the experimental research of steel sleeve,the respective and separate bond-slip constitutive relationships of two interfaces were formed by average division.Then by using these two constitutive relationships,the bonded rebars system of steel sleeve was studied by the FE analysis based on the ANSYS program considering slip of two interfaces.According to the analysis result,the bond-slip constitutive relationships of two interfaces are reasonable,and the load transfer mechanism of the bonded rebars system of steel sleeve is understood,which is the fundamental work in the further cognition of the load transfer mechanism of the bonded rebars system.
- bonded rebars,
- bond-slip,
- load transfer mechanism,
- finite element analysis

FullText(HTML)

References(7)

References

张建荣,黄河军.植筋胶拉伸抗剪本构关系的研究[J].结构工程师,2006,22(3):72-75.

[2] 黄河军,张建荣,吴进,等.结构胶粘剂金属套筒粘结试验研究[J].莱阳农学院学报:自然科学版,2006,23(3),220-224.

[3] GB 503672006混凝土结构加固设计规范[S].

[4] JGJ 1452004混凝土结构后锚固技术规程[S].

[5] 刘慧林,刘有军.化学植筋技术原理及其实验研究[J].国外建材科技,2006,27(1):67-70.

[6] Michael McCay,Ronald ACook,Kailash Krishnamurthy. Pullout Simulation of Post-Installed Chemically Bonded Anchors[J].Journal of Structural Engineering,1996,122(9):1016-1024.

[7] Ronald A Cook. Behavior of Chemically Bonded Anchors[J].Journal of Structural Engineering,1993,119(9):2744-2762.

Relative Articles

[1]	SU Yasen. Stress Mechanism and Design Method of UHPC-Encased CFST Column-to-Beam One-Side Bolted Joints[J]. INDUSTRIAL CONSTRUCTION, 2024, 54(11): 144-151. doi: 10.3724/j.gyjzG24030308
[2]	ZHAO Jing, CHEN Cheng, ZHANG Rui, LI Wenxiang, CAI Leichuan. Study on Force Mechanisms of Support Systems Combined by Long and Short Piles in Soil-Rock Composite Strata[J]. INDUSTRIAL CONSTRUCTION, 2024, 54(12): 204-213. doi: 10.3724/j.gyjzG23032203
[3]	SHAN Bo, DAI Shangqi, KONG Yuan, LIN Yuming, ZHANG Mingpeng, HUANG Bin. Experimental Research on Anchorage Performance of Glued-in Threaded Steel Rod in Glubam[J]. INDUSTRIAL CONSTRUCTION, 2022, 52(8): 152-159,8. doi: 10.13204/j.gyjzG22010508
[4]	Ding Hongyan, Yang Baokun, Zhang Puyang, Qiao Shuai. EXPERIMENTAL RESEARCH ON SEISMIC PERFORMANCE OF STORY-ADDED REINFORCED CONCRETE FRAME[J]. INDUSTRIAL CONSTRUCTION, 2015, 45(5): 49-54. doi: 10.13204/j.gyjz201505012
[5]	Yu Feng, Cheng Anchun, Xu Guoshi, Li Deguang. NONLINEAR FINITE ELEMENT ANALYSIS OF PVC-FRP CONFINED CONCRETE SHORT COLUMN UNDER AXIAL COMPRESSION[J]. INDUSTRIAL CONSTRUCTION, 2015, 45(4): 77-82. doi: 10.13204/j.gyjz201504014
[6]	Li Junfeng, Wu Renpeng. STUDY ON FORCE ANALYSIS OF MULTI RIBBED FLOOR SLAB UNDER VERTICAL LOAD[J]. INDUSTRIAL CONSTRUCTION, 2013, 43(12): 175-179,137. doi: 10.13204/j.gyjz201312033
[7]	Liang Yan, Luo Xiao-yong, Xiao Xiao-qiong, Zhang Yan-fang. EXPERIMENTAL STUDY ON BOND-SLIP PERFORMANCE OF CORRODED REINFORCED CONCRETE[J]. INDUSTRIAL CONSTRUCTION, 2012, 42(10): 95-100. doi: 10.13204/j.gyjz201210021
[8]	Liu Ronggui, Li Mingjun, Liu Dexin, Cai Dongsheng, Xie Guihua. EXPERIMENTAL INVESTIGATION AND FINITE ELEMENT ANALYSIS OF WEDGE-BOND ANCHORAGE FOR CFRP-TENDONS[J]. INDUSTRIAL CONSTRUCTION, 2012, 42(11): 92-96. doi: 10.13204/j.gyjz201211020
[9]	Ouyang Jian, Cheng Wenrang, Chen Zhongfan. DYNAMIC TEST OF PROPERTY OF CHEMICAL ADHESIVE ANCHORAGE BAR[J]. INDUSTRIAL CONSTRUCTION, 2010, 40(6): 68-73. doi: 10.13204/j.gyjz201006016
[10]	Liu Ronggui, Xu Fei. FINITE ELEMENT ANALYSIS OF BONDING ANCHORS FOR EXPERIMENTAL BRIDGE WITH CFRP CABLES[J]. INDUSTRIAL CONSTRUCTION, 2009, 39(12): 61-64. doi: 10.13204/j.gyjz200912016
[11]	Yang Zhao, Dai Shaobin. EXPERIMENTAL STUDY AND FINITE ELEMENT ANALYSIS OF BRICK WALL STRENGTHENED BY CFRP[J]. INDUSTRIAL CONSTRUCTION, 2009, 39(5): 124-127. doi: 10.13204/j.gyjz200905028
[12]	Peng Fuming, Zhang Xinshan, Zhang Ning, Cai Peng. FINITE ELEMENT ANALYSIS OF THE CONNECTION BETWEEN ADDED STEEL GIRDERS AND EXISTING CONCRETE STRUCTURES[J]. INDUSTRIAL CONSTRUCTION, 2009, 39(7): 115-117. doi: 10.13204/j.gyjz200907031
[13]	Liu Junling, Liang Bin, Hu Jun. THEORETICAL ANALYSIS ON BOND-SLIP CONSTITUTIVE RELATION OF PUSHING AND PULL MEMBER ON STEEL AND CONCRETE INTERFACE IN SRC STRUCTURES[J]. INDUSTRIAL CONSTRUCTION, 2008, 38(5): 93-95,108. doi: 10.13204/j.gyjz200805022
[14]	Lu Jun-long, Zhang Yin, Yao Qian-feng. ANALYSIS OF CONSTRUCTION OF RECTIFICATION OF MASONRY PAGODA BY FINITE ELEMENT METHOD[J]. INDUSTRIAL CONSTRUCTION, 2007, 37(12): 122-124. doi: 10.13204/j.gyjz200712029
[15]	Wang Yihong, Guo Zenghui, Fu Min, Li Xianshun, Huang Kun. EXPERIMENT STUDY ON THE MECHANICAL PROPERTIES OF THE MULTI-CONSTRAINT CONCRETE IN THE STEEL TUBE[J]. INDUSTRIAL CONSTRUCTION, 2007, 37(8): 5-8. doi: 10.13204/j.gyjz200708002
[16]	Zhang Lei-shun, Guo Jin-jun. EXPERIMENT ON SHEAR PROPERTY OF NEWAND OLD CONCRETE BONDING WITH PLANTING STEEL[J]. INDUSTRIAL CONSTRUCTION, 2007, 37(11): 71-73. doi: 10.13204/j.gyjz200711019
[17]	Dong Jing, Zhang Jianrong, Wu Jin. PULLOUT TEST AND FINITE ELEMENT ANALYSIS OF ADHESIVE ANCHORAGE SYSTEM[J]. INDUSTRIAL CONSTRUCTION, 2007, 37(2): 103-106,102. doi: 10.13204/j.gyjz200702026
[18]	Chun Qing, Qiu Hongxing, Huang Zhicheng, Pan Jianwu, Fang Zhibao. EXPERIMENTAL STUDY ON ANCHORAGE PERFORMANCE OF DOUBLE ADHESIVE ANCHORS FOR RC STRUCTURES[J]. INDUSTRIAL CONSTRUCTION, 2006, 36(2): 98-100. doi: 10.13204/j.gyjz200602029
[19]	Xu Qiang, Wu Shengxing. NON-LINEAR FEM ANALYSIS OF INTERACTION AMONG PILE-SUPPORT, PILES AND SOIL OF A CABLE-STAYED BRIDGE[J]. INDUSTRIAL CONSTRUCTION, 2005, 35(5): 16-19. doi: 10.13204/j.gyjz200505004
[20]	Cheng Caixia, Zhao Junhai, Wei Xueying. SOLUTION OF ULTIMATE LOAD FOR SLOPE BY UNIFIED SLIP LINE FIELD METHOD AND FINITE ELEMENT METHOD[J]. INDUSTRIAL CONSTRUCTION, 2005, 35(10): 33-35,46. doi: 10.13204/j.gyjz200510011