[1] | CHEN Penghui, WANG Qingli. Research on Mechanical Properties of Concrete Filled Circular CFRP-steel Tubular Under Compression and Torsion[J]. INDUSTRIAL CONSTRUCTION, 2022, 52(1): 17-25. doi: 10.13204/j.gyjzG20090604 |
[2] | PENG Yaping, WANG Wenchao, JIN Peng, LI Honglin, SHI Lei. Experimental Research on CFRP-concrete Two-way Composite Floor Slab Connected Without Gap Under Static Load[J]. INDUSTRIAL CONSTRUCTION, 2022, 52(1): 205-210. doi: 10.13204/j.gyjzG20090102 |
[3] | LI Da, ZHU Rui-jie, LI Feng. Experimental Research on Mechanical Properties of High-Strength Aluminum Alloy Bolt Ball Joints Under Axial Tension and Compression[J]. INDUSTRIAL CONSTRUCTION, 2022, 52(9): 108-114. doi: 10.13204/j.gyjzG20121908 |
[4] | JIN Lingzhi, LIAN Deming, LI Li, LIANG Xi. EXPERIMENTAL RESEARCH ON FLEXURAL BEHAVIOR OF UHPC COMPOSITE SLABS WITH STEEL TRUSS[J]. INDUSTRIAL CONSTRUCTION, 2020, 50(3): 69-75. doi: 10.13204/j.gyjz202003012 |
[5] | Xu Yehui, Li Bin, Xun Yong. EXPERIMENTAL RESEARCH ON SECONDARY BENDING BEHAVIOR OF REINFORCED CONCRETE BEAMS STRENGTHENED WITH TEXTILE REINFORCED CONCRETE SHEETS[J]. INDUSTRIAL CONSTRUCTION, 2015, 45(1): 173-178. doi: 10.13204/j.gyjz201501035 |
[6] | He Mingsheng, Wang Yong, Xia Duotian, Fu Xiaojian, Shi Leiwei. EXPERIMENTAL STUDY ON SHEARING STRENGTH OF THE NEW COMPOSITE BLOCK MASONRY[J]. INDUSTRIAL CONSTRUCTION, 2013, 43(5): 94-98. doi: 10.13204/j.gyjz201305020 |
[7] | Jia Bin, Cheng Jin, Meng Naiqing, Liu Shunfeng. FLEXURAL BEHAVIOR OF CORRODED REINFORCED CONCRETE BEAMS STRENGTHENED WITH CARBON FIBER COMPOSITE SHEETS[J]. INDUSTRIAL CONSTRUCTION, 2013, 43(5): 144-147. doi: 10.13204/j.gyjz201305030 |
[8] | Pan Zhihong, Li Aiqun, Yang Jianping. EXPERIMENT AND NONLINEAR STATIC ANALYSIS OF BRICK MASONRY WALL STRENGTHENED WITH STRAND MESH REINFORCING POLYMER MORTAR OVERLAY[J]. INDUSTRIAL CONSTRUCTION, 2012, 42(5): 146-150,160. doi: 10.13204/j.gyjz2011205028 |
[9] | Ji Xiao-lian, Liu Yang-jun, Wu Yao-hua. EXPERIMENT STUDY ON BEARING CAPACITY OF PERFORATED STEEL PLATE SHEAR CONNECTORS[J]. INDUSTRIAL CONSTRUCTION, 2012, 42(10): 132-136,52. doi: 10.13204/j.gyjz201210027 |
[10] | Wang Zhuolin, Jiang Lixue. EXPERIMENTAL STUDY ON LOW STRENGTH CAVITY WALLS STRENGTHENED WITH HIGH STRENGTH STEEL WIRE AND POLYMER MORTAR[J]. INDUSTRIAL CONSTRUCTION, 2011, 41(11): 60-65. doi: 10.13204/j.gyjz201111013 |
[11] | Mao Xiaofei, Yang junjie, Zhag Zhu. EXPERIMENTAL STUDY ON THE SHEAR CARRYING CAPACITY OF Z-SHAPED COLUMN[J]. INDUSTRIAL CONSTRUCTION, 2010, 40(11): 70-74. doi: 10.13204/j.gyjz201011018 |
[12] | Nong Jinlong, Yi Weijian, Huang Zhengyu. APPLICATION OF WATER-SOLUBILITY POLYMER POWDERS IN THE MORTAR WITH SUPER MICRO-DOSAGE[J]. INDUSTRIAL CONSTRUCTION, 2009, 39(10): 86-89. doi: 10.13204/j.gyjz200910021 |
[13] | Chen Wenyong, Chen Xiaobing, Ding Yi, Tang Jixiang. THE SHEAR BEHAVIOR OF CONCRETE BEAM REINFORCED WITH ECC AND FRP GRID[J]. INDUSTRIAL CONSTRUCTION, 2009, 39(12): 118-122. doi: 10.13204/j.gyjz200912029 |
[14] | Huang Hua, Liu Boquan, Liu Weiduo. STUDY ON TENSILE BOND PERFORMANCE BETWEEN POLYMER MORTAR AND CONCRETE[J]. INDUSTRIAL CONSTRUCTION, 2009, 39(4): 98-102,105. doi: 10.13204/j.gyjz200904022 |
[15] | Huang Hua, Liu Boquan, Liu Weiduo. STUDY ON SHEAR BOND PERFORMANCE BETWEEN POLYMER MORTAR AND CONCRETE[J]. INDUSTRIAL CONSTRUCTION, 2009, 39(4): 103-105. doi: 10.13204/j.gyjz200904023 |
[16] | Wu Zhuanqin, Zeng Zhaobo, Shang Renjie, Liu Jingliang. EXPERIMENTAL STUDY ON FRICTION COEFFICIENT OF RETARD-BONDED PRESTRESSING STRAND[J]. INDUSTRIAL CONSTRUCTION, 2008, 38(11): 20-23. doi: 10.13204/j.gyjz200811006 |
[17] | Cao Zhong-min, Li Ai-qun, Wang Ya-yong, Yao Qiu-lai. EXPERIMENTAL STUDY ON RC BEAM-COLUMN JOINTS STRENGTHENED BY COMPOSITE COVER OF HIGH-STRENGTH WIRE CABLE MESH AND POLYMER MORTAR[J]. INDUSTRIAL CONSTRUCTION, 2006, 36(8): 92-94,88. doi: 10.13204/j.gyjz200608028 |
[18] | Wang Lianguang, Wang Che. EXPERIMENTAL STUDY ON THE SHEAR CHARACTERISTIC OF STEEL ENCASED LIGHT AGGREGATE CONCRETE BEAMS[J]. INDUSTRIAL CONSTRUCTION, 2005, 35(1): 65-66,55. doi: 10.13204/j.gyjz200501020 |
[19] | Zheng Guodong, Hou Faliang. EFFECT OF SECONDARY LOADING ON CALCULATION RESULTS OF NORMAL SECTION'S ULTIMATE BEARING CAPACITY OF RC BEAMS STRENGTHENED WITH CFRP[J]. INDUSTRIAL CONSTRUCTION, 2004, 34(5): 73-75. doi: 10.13204/j.gyjz200405023 |
[20] | Wang Zijun, Liu Weiqing, Yao Qiulai, Dai Yunxiang. EXPERIMENTAL RESEARCH ON THE FLEXURAL BEHAVIOR OF RC BEAMS STRENGTHENED BY CARBON FIBER SHEET UNDER QUADRATIC LOADING[J]. INDUSTRIAL CONSTRUCTION, 2004, 34(7): 85-87. doi: 10.13204/j.gyjz200407025 |