EXPERIMENTAL RESEARCH AND FEM ANALYSIS ON OVERLAPPED CHS PARALLEL K-JOINTS

Jiang Jian-feng; Wu Jie; Feng Jian; Dai Ya-ping; Zhao Hong-kang

doi:10.13204/j.gyjz200608020

Volume 36 Issue 8

Dec. 2014

Turn off MathJax

Article Contents

Article Navigation > INDUSTRIAL CONSTRUCTION > 2006 > 36(8): 64-67

Jiang Jian-feng, Wu Jie, Feng Jian, Dai Ya-ping, Zhao Hong-kang. EXPERIMENTAL RESEARCH AND FEM ANALYSIS ON OVERLAPPED CHS PARALLEL K-JOINTS[J]. INDUSTRIAL CONSTRUCTION, 2006, 36(8): 64-67. doi: 10.13204/j.gyjz200608020

Citation:

Jiang Jian-feng, Wu Jie, Feng Jian, Dai Ya-ping, Zhao Hong-kang. EXPERIMENTAL RESEARCH AND FEM ANALYSIS ON OVERLAPPED CHS PARALLEL K-JOINTS[J]. INDUSTRIAL CONSTRUCTION, 2006, 36(8): 64-67. doi: 10.13204/j.gyjz200608020

Citation:

PDF( 0 KB)

EXPERIMENTAL RESEARCH AND FEM ANALYSIS ON OVERLAPPED CHS PARALLEL K-JOINTS

doi: 10.13204/j.gyjz200608020

1.
1. College of Civil Engineering,Southeast University Nanjing 210096;
2.
2. Suzhou Institute of Architecture Design Co.,Ltd. Suzhou 215002

Received Date: 2006-05-10
Publish Date: 2006-08-20

Abstract

Abstract

The experimental results of 5 full scale overlapped CHS K-joints subjected to axial load are compared with those of finite element models.Using the finite-element study as a platform,it is studied that the effect of faying rate on the failure mode and ultimate bearing capacity of the overlapped K-joints.Difference of mechanics capability between parallel K-joints and planar K-joints is also discussed.Finally,some useful conclusions are got.
- parallel K-joint,
- overlap,
- tubular joints,
- failure mode,
- ultimate bearing capacity