LECTOTYPE OF LIGHT STEEL CRANE BEAM

Xie Jian-zhong; Wang Feng-qin; Shi Zhi-qiang

doi:10.13204/j.gyjz200606008

Volume 36 Issue 6

Dec. 2014

Turn off MathJax

Article Contents

Abstract

References

Article Navigation > INDUSTRIAL CONSTRUCTION > 2006 > 36(6): 21-23,42

Xie Jian-zhong, Wang Feng-qin, Shi Zhi-qiang. LECTOTYPE OF LIGHT STEEL CRANE BEAM[J]. INDUSTRIAL CONSTRUCTION, 2006, 36(6): 21-23,42. doi: 10.13204/j.gyjz200606008

Citation:

Xie Jian-zhong, Wang Feng-qin, Shi Zhi-qiang. LECTOTYPE OF LIGHT STEEL CRANE BEAM[J]. INDUSTRIAL CONSTRUCTION, 2006, 36(6): 21-23,42. doi: 10.13204/j.gyjz200606008

Xie Jian-zhong, Wang Feng-qin, Shi Zhi-qiang. LECTOTYPE OF LIGHT STEEL CRANE BEAM[J]. INDUSTRIAL CONSTRUCTION, 2006, 36(6): 21-23,42. doi: 10.13204/j.gyjz200606008

Citation:

Xie Jian-zhong, Wang Feng-qin, Shi Zhi-qiang. LECTOTYPE OF LIGHT STEEL CRANE BEAM[J]. INDUSTRIAL CONSTRUCTION, 2006, 36(6): 21-23,42. doi: 10.13204/j.gyjz200606008

PDF( 0 KB)

LECTOTYPE OF LIGHT STEEL CRANE BEAM

doi: 10.13204/j.gyjz200606008

1.
Beijing Industrial Design and Research Institute Beijing 100055

Received Date: 2006-02-27
Publish Date: 2006-06-20

Abstract

Abstract

It was described that the steel crane beam system with crane's lift capacity being no more than 20t,and whose beam span being no larger than 12m.It was also conducted that numerical descriptions of the lectotype for the crane beam.
- crane,
- working system,
- steel crane beam,
- lower braced type,
- truss type,
- solid-web crane beam

FullText(HTML)

References(4)

References

GB 50009-2001 建筑结构荷载规范

[2] GB 50017-2003 钢结构设计规范

[3] 汪一骏,顾泰昌,冯东,等.钢结构设计手册.北京:中国建筑工业出版社,2003

[4] 重庆钢铁设计研究院.工业厂房钢结构设计手册.北京:冶金工业出版社,1983

Relative Articles

[1]	LIU Jiaqi, CAO Dafu, WANG Kun, ZHOU Yanling, DONG Zheng. EXPERIMENTAL RESEARCH ON SHEAR CAPACITY OF PRESTRESSED TRUSS-TYPE STEEL-REINFORCED CONCRETE BEAMS[J]. INDUSTRIAL CONSTRUCTION, 2021, 51(10): 14-20. doi: 10.13204/j.gyjzG21051308
[7]	Lian Jijian, Liu Hongbo, Chen Zhihua. RESEARCH ON THE MECHANICAL BEHAVIOR OF TRUSS-TYPE SUPPORTING STRUCTURES FOR WIND TURBINE[J]. INDUSTRIAL CONSTRUCTION, 2015, 45(8): 160-165. doi: 10.13204/j.gyjz201508029
[8]	Chen Jiawei, Dan Zeyi, Lin Hong. THE DESIGN OF CRANE BEAM SYSTEM WITH COLUMN REMOVED IN A LARGE STEEL FACTORY[J]. INDUSTRIAL CONSTRUCTION, 2013, 43(2): 134-137. doi: 10.13204/j.gyjz201302027
[9]	Chang Haosong, Jiang Xinliang, Li Xiaorui, Huang Xinhao, Yang Jianping, Ge Anxiang. FATIGUE PERFORMANCE TESTING AND ANALYSIS OF CRANE GIRDERS FOR A STEEL MAKING PLANT[J]. INDUSTRIAL CONSTRUCTION, 2011, 41(9): 127-130. doi: 10.13204/j.gyjz201109029
[10]	Hu Liang, Ouyang Yu, Tu Mufa. EXPERIMENTAL STUDY ON FATIGUE PROPERTY OF STEEL CRANE BEAM STRENGTHENED BY CFRP[J]. INDUSTRIAL CONSTRUCTION, 2010, 40(12): 110-112,3. doi: 10.13204/j.gyjz201012028
[11]	Zhang Xiao-xin, Peng Fu-ming, Li Su-qiu. INSPECTION AND APPRAISAL OF THE STEEL CRANE GIRDER FOR UPGRADING OF CRANE IN A FACTORY BUILDING[J]. INDUSTRIAL CONSTRUCTION, 2006, 36(7): 92-94. doi: 10.13204/j.gyjz200607025