Login
Register
E-alert
2006 Vol. 36, No. 6
Display Method:
2006, 36(6): 1-2.
doi: 10.13204/j.gyjz200606001
Abstract:
It is introduced that the structure and features of H-section steel truss with contactless plates used for modern automobile projects in Beijing.The applications show that about 20% steel can be saved by this structural form as compared to that with ...
It is introduced that the structure and features of H-section steel truss with contactless plates used for modern automobile projects in Beijing.The applications show that about 20% steel can be saved by this structural form as compared to that with ...
2006, 36(6): 3-5.
doi: 10.13204/j.gyjz200606002
Abstract:
The mill building for old assembling workshop for modern automobiles in Beijing is the one by reforming an old factory building established in 1980s.In order to save land and investment the principle of new technique and old mill building was combine...
The mill building for old assembling workshop for modern automobiles in Beijing is the one by reforming an old factory building established in 1980s.In order to save land and investment the principle of new technique and old mill building was combine...
2006, 36(6): 6-7.
doi: 10.13204/j.gyjz200606003
Abstract:
It was introduced the structural design,scheme comparison of light truck press room of Beijing Modern Automobile Factory.The design shows that there are many advantages in structural property if RC columns and solid-web I-beam are used for large mill...
It was introduced the structural design,scheme comparison of light truck press room of Beijing Modern Automobile Factory.The design shows that there are many advantages in structural property if RC columns and solid-web I-beam are used for large mill...
2006, 36(6): 8-9.
doi: 10.13204/j.gyjz200606004
Abstract:
The portal frames were used for a workshop of refining lithium and potassium in Salt Lake Prefecture of Qinghai Province,whose height was 24m,which was not conformed with Technical Regulations for Steel Structure of Light Buildings with Portal Frames...
The portal frames were used for a workshop of refining lithium and potassium in Salt Lake Prefecture of Qinghai Province,whose height was 24m,which was not conformed with Technical Regulations for Steel Structure of Light Buildings with Portal Frames...
2006, 36(6): 10-11,119.
doi: 10.13204/j.gyjz200606005
Abstract:
The bent frame system and portal frame system are often used for industrial mill buildings.Therefore,the light steel portal frame system is compared comprehensively to the bent frame system of solid-web steel column and solid-web steel plate beam,the...
The bent frame system and portal frame system are often used for industrial mill buildings.Therefore,the light steel portal frame system is compared comprehensively to the bent frame system of solid-web steel column and solid-web steel plate beam,the...
2006, 36(6): 12-16.
doi: 10.13204/j.gyjz200606006
Abstract:
In order to understand the economy and practicality of a column grid,taking a common single-story mill building for example,it was analyzed and compared that the column grids,engineering quantity,steel consumption and cost in medium and small single-...
In order to understand the economy and practicality of a column grid,taking a common single-story mill building for example,it was analyzed and compared that the column grids,engineering quantity,steel consumption and cost in medium and small single-...
2006, 36(6): 17-20.
doi: 10.13204/j.gyjz200606007
Abstract:
It was introduced that the basic forms of the roof trusses for modern industrial mill buildings.It was also explained in detail that the calculation of internal forces of roof truss,determination of truss span-depth,and layout of web members etc,whic...
It was introduced that the basic forms of the roof trusses for modern industrial mill buildings.It was also explained in detail that the calculation of internal forces of roof truss,determination of truss span-depth,and layout of web members etc,whic...
2006, 36(6): 21-23,42.
doi: 10.13204/j.gyjz200606008
Abstract:
It was described that the steel crane beam system with crane's lift capacity being no more than 20t,and whose beam span being no larger than 12m.It was also conducted that numerical descriptions of the lectotype for the crane beam.
It was described that the steel crane beam system with crane's lift capacity being no more than 20t,and whose beam span being no larger than 12m.It was also conducted that numerical descriptions of the lectotype for the crane beam.
2006, 36(6): 24-27,34.
doi: 10.13204/j.gyjz200606009
Abstract:
The key is to save resources for a conservation-minded society,and the idea of making the best use of eveything manifests high-efficient and sustainable use of resources.The infrastructure construction in urban residential area,including the recycle ...
The key is to save resources for a conservation-minded society,and the idea of making the best use of eveything manifests high-efficient and sustainable use of resources.The infrastructure construction in urban residential area,including the recycle ...
2006, 36(6): 28-30.
doi: 10.13204/j.gyjz200606010
Abstract:
The copper coin bureau established in 1905, is the pioneer modern machine shop in Chongqing. Originally it only produced copper coin and silver coin, then it was used to produce bullets by some warlords. Whose mill buildings are the largest industria...
The copper coin bureau established in 1905, is the pioneer modern machine shop in Chongqing. Originally it only produced copper coin and silver coin, then it was used to produce bullets by some warlords. Whose mill buildings are the largest industria...
2006, 36(6): 31-34.
doi: 10.13204/j.gyjz200606011
Abstract:
Five atria to Department Store of Xinjiekou and Orient Plaza in Nanjing, the First Affiliated Hospital of Jiangxi Medical University and Women and Children. s Hospital of Jiangxi Province in Nanchang were investigated, some results were achieved and ...
Five atria to Department Store of Xinjiekou and Orient Plaza in Nanjing, the First Affiliated Hospital of Jiangxi Medical University and Women and Children. s Hospital of Jiangxi Province in Nanchang were investigated, some results were achieved and ...
2006, 36(6): 35-37,95.
doi: 10.13204/j.gyjz200606012
Abstract:
The development status of housing maintenance is analyzed. The evaluation index system of housing degree of ageing is established by AHP and its value is calculated by FCJ according to project examples. The types of housin gmaintenance are classified...
The development status of housing maintenance is analyzed. The evaluation index system of housing degree of ageing is established by AHP and its value is calculated by FCJ according to project examples. The types of housin gmaintenance are classified...
2006, 36(6): 38-42.
doi: 10.13204/j.gyjz200606013
Abstract:
A robust computer procedure for weight minimization of high-rise portal frames and shear walls under the deflection constraint at various locations is presented. It replaces the conventional tedious and unreliable manual assessment for numerous membe...
A robust computer procedure for weight minimization of high-rise portal frames and shear walls under the deflection constraint at various locations is presented. It replaces the conventional tedious and unreliable manual assessment for numerous membe...
2006, 36(6): 43-46,64.
doi: 10.13204/j.gyjz200606014
Abstract:
The non-simultaneous stiffness equations, whose fundamental unknown variations are floorcs displacements uk、vkOk are obtained from three conditions of static force equilibriums, displacement compatibility and mechanic relation ofmaterial.The means is...
The non-simultaneous stiffness equations, whose fundamental unknown variations are floorcs displacements uk、vkOk are obtained from three conditions of static force equilibriums, displacement compatibility and mechanic relation ofmaterial.The means is...
2006, 36(6): 47-49.
doi: 10.13204/j.gyjz200606015
Abstract:
Based on the viscoelastic theory, it was proposed the plane finite element model of concrete frame structures, in which a linear three-parameter viscoelastic model was adopted. The program of finite element was developed and used in analyzing the res...
Based on the viscoelastic theory, it was proposed the plane finite element model of concrete frame structures, in which a linear three-parameter viscoelastic model was adopted. The program of finite element was developed and used in analyzing the res...
2006, 36(6): 50-53,76.
doi: 10.13204/j.gyjz200606016
Abstract:
large-area concrete structure is a kind of structure with an attractive outlook in large-scale public buildings. It mainly means the length or width of the monolithically cast concrete structure is longer or wider than the maximum of the structure in...
large-area concrete structure is a kind of structure with an attractive outlook in large-scale public buildings. It mainly means the length or width of the monolithically cast concrete structure is longer or wider than the maximum of the structure in...
2006, 36(6): 54-58.
doi: 10.13204/j.gyjz200606017
Abstract:
Using the numerical simulating technique, the limit loads with various parameters for strip footings near excavations are obtained. As accepted in other proposals, the estimate of the bearing capacity near an excavation is calculated here respectivel...
Using the numerical simulating technique, the limit loads with various parameters for strip footings near excavations are obtained. As accepted in other proposals, the estimate of the bearing capacity near an excavation is calculated here respectivel...
2006, 36(6): 59-64.
doi: 10.13204/j.gyjz200606018
Abstract:
The strength reduction method is used for the analysis of two-dimensional and three-dimension slope stabilities,whose results are compared with the result of limit equilibrium method, the result shows the strength reduction method is feasible. The fa...
The strength reduction method is used for the analysis of two-dimensional and three-dimension slope stabilities,whose results are compared with the result of limit equilibrium method, the result shows the strength reduction method is feasible. The fa...
2006, 36(6): 65-69,5.
doi: 10.13204/j.gyjz200606019
Abstract:
Based on the field experiments, it is studied the behaviors of the three types of connection between cap(foundation) and pile top, i. e. the first type is pile top being in contact with cap, the second is the pile top being separated from foundation ...
Based on the field experiments, it is studied the behaviors of the three types of connection between cap(foundation) and pile top, i. e. the first type is pile top being in contact with cap, the second is the pile top being separated from foundation ...
2006, 36(6): 70-76.
doi: 10.13204/j.gyjz200606020
Abstract:
Based on the strong learning ability and fuzzy logic function of ANFIS, a method for predicting vertical ultimate bearing capacity of single pile is presented. In this model data on static tests are trained and predicted. It is showed that the method...
Based on the strong learning ability and fuzzy logic function of ANFIS, a method for predicting vertical ultimate bearing capacity of single pile is presented. In this model data on static tests are trained and predicted. It is showed that the method...
2006, 36(6): 77-80,87.
doi: 10.13204/j.gyjz200606021
Abstract:
The splitting tensile method for the tensile strength of concrete is usually used in structural applications, so it is great important in the investingating the relation between the direct tensile strength and the splitting strength. But there lation...
The splitting tensile method for the tensile strength of concrete is usually used in structural applications, so it is great important in the investingating the relation between the direct tensile strength and the splitting strength. But there lation...
2006, 36(6): 81-82.
doi: 10.13204/j.gyjz200606022
Abstract:
Location and covering thickness of steel bars in concrete are important factors relating to the quality of concrete structures. Through research and engineering application of electromagnetic method, a set of integrated testing technology is brought ...
Location and covering thickness of steel bars in concrete are important factors relating to the quality of concrete structures. Through research and engineering application of electromagnetic method, a set of integrated testing technology is brought ...
2006, 36(6): 83-87.
doi: 10.13204/j.gyjz200606023
Abstract:
Stress distribution at cross section of transverse uniformly distributed load and non-uniformly distributed load applied to concrete cylinder by finite element method is analyzed. The results show that the area of cross-sectional tensile stress excee...
Stress distribution at cross section of transverse uniformly distributed load and non-uniformly distributed load applied to concrete cylinder by finite element method is analyzed. The results show that the area of cross-sectional tensile stress excee...
2006, 36(6): 88-91,113.
doi: 10.13204/j.gyjz200606024
Abstract:
Three high-strength lightweight aggregate concrete (LWAC) beams were experimented for long-term deflections,which lasted for nearly 1 year, with the average 28-day compressive strength 601 8MPa and 6414MPa. From the test results it is observed that l...
Three high-strength lightweight aggregate concrete (LWAC) beams were experimented for long-term deflections,which lasted for nearly 1 year, with the average 28-day compressive strength 601 8MPa and 6414MPa. From the test results it is observed that l...
2006, 36(6): 92-95.
doi: 10.13204/j.gyjz200606025
Abstract:
Based on practical engineering background, the string-bow pre-stressed latticed shell structure is proposed and applied to large-span indoor coal storage yard design for the first time. The static behaviors of the structure are analyzed in detail, an...
Based on practical engineering background, the string-bow pre-stressed latticed shell structure is proposed and applied to large-span indoor coal storage yard design for the first time. The static behaviors of the structure are analyzed in detail, an...
2006, 36(6): 96-98,103.
doi: 10.13204/j.gyjz200606026
Abstract:
Based on the experiment of eight pieces of brick masonry walls with pilaster strengthened by GFRP and one piece of normal masonry wall with pilaster, truss bar model of FRP and using for reference of code for seismic design of building( GB5001- 2001)...
Based on the experiment of eight pieces of brick masonry walls with pilaster strengthened by GFRP and one piece of normal masonry wall with pilaster, truss bar model of FRP and using for reference of code for seismic design of building( GB5001- 2001)...
2006, 36(6): 99-103.
doi: 10.13204/j.gyjz200606027
Abstract:
The fatigue life of cracked steel plate can be significantly increased by external bonded CFRP plates. The influence parameters, such as the length, width, thickness, elastic modulus of CFRP, and the thickness, shear modulus of adhesive, on stress in...
The fatigue life of cracked steel plate can be significantly increased by external bonded CFRP plates. The influence parameters, such as the length, width, thickness, elastic modulus of CFRP, and the thickness, shear modulus of adhesive, on stress in...
2006, 36(6): 104-106,116.
doi: 10.13204/j.gyjz200606028
Abstract:
Protection of cultural heritage structures such as the ancient pagoda from severe earthquake by conventional strengthening methods is not always reliable. In recent years carbon fiber reinforced polymer( CFRP) has been widely applied to the field of ...
Protection of cultural heritage structures such as the ancient pagoda from severe earthquake by conventional strengthening methods is not always reliable. In recent years carbon fiber reinforced polymer( CFRP) has been widely applied to the field of ...
2006, 36(6): 107-109.
doi: 10.13204/j.gyjz200606029
Abstract:
It has been described the remarkable characteristics of the cast in-place concrete wall with wire net, the factor of production, key technology and the performance of the wall. By the comparison of the wall body and project instance with other non-so...
It has been described the remarkable characteristics of the cast in-place concrete wall with wire net, the factor of production, key technology and the performance of the wall. By the comparison of the wall body and project instance with other non-so...
2006, 36(6): 110-113.
doi: 10.13204/j.gyjz200606030
Abstract:
The slab comprehensive dwelling building in Datunli District of Beijing is a multifun ctional apartment house including many functions such as housing, leisure, body building, shopping and working. Its style goes after the Europe classical and its pl...
The slab comprehensive dwelling building in Datunli District of Beijing is a multifun ctional apartment house including many functions such as housing, leisure, body building, shopping and working. Its style goes after the Europe classical and its pl...
2006, 36(6): 114-116.
doi: 10.13204/j.gyjz200606031
Abstract:
It was explored that the construction of ecological cities, creation of urban features, design of urban landscapes,as well as protection of historic remains etc, based on proposing the problems in urban construction at present and their reasons. Whic...
It was explored that the construction of ecological cities, creation of urban features, design of urban landscapes,as well as protection of historic remains etc, based on proposing the problems in urban construction at present and their reasons. Whic...
2006, 36(6): 117-119.
doi: 10.13204/j.gyjz200606032
Abstract:
There are many protection and utilization values in modern historic and cultural architectures, cultural blocks, as well as historic ruins in China. The damaging actions of demolishing old buildings and constructing new ones in a large-scale shall be...
There are many protection and utilization values in modern historic and cultural architectures, cultural blocks, as well as historic ruins in China. The damaging actions of demolishing old buildings and constructing new ones in a large-scale shall be...
