STUDY ON FORCED PERFORMANCE TEST OF EDGE JOINTS FOR REINFORCED CONCRETE FLAT BEAMS WITH EDGE BEAM

Guo Jinshi; Yin Xinsheng

doi:10.13204/j.gyjz200510023

Volume 35 Issue 10

Dec. 2014

Turn off MathJax

Article Contents

Article Navigation > INDUSTRIAL CONSTRUCTION > 2005 > 35(10): 76-78

Guo Jinshi, Yin Xinsheng. STUDY ON FORCED PERFORMANCE TEST OF EDGE JOINTS FOR REINFORCED CONCRETE FLAT BEAMS WITH EDGE BEAM[J]. INDUSTRIAL CONSTRUCTION, 2005, 35(10): 76-78. doi: 10.13204/j.gyjz200510023

Citation:

Guo Jinshi, Yin Xinsheng. STUDY ON FORCED PERFORMANCE TEST OF EDGE JOINTS FOR REINFORCED CONCRETE FLAT BEAMS WITH EDGE BEAM[J]. INDUSTRIAL CONSTRUCTION, 2005, 35(10): 76-78. doi: 10.13204/j.gyjz200510023

Citation:

PDF( 0 KB)

STUDY ON FORCED PERFORMANCE TEST OF EDGE JOINTS FOR REINFORCED CONCRETE FLAT BEAMS WITH EDGE BEAM

doi: 10.13204/j.gyjz200510023

Guo Jinshi¹,
Yin Xinsheng²

1.
1. Civil Engineering Department,Institute of Jilin Architecture and Engineering Changchun 130021;
2.
2. Institute of Architecture and Civil Engineering,Shenzhen University Shenzhen 518067

Received Date: 2005-05-16
Publish Date: 2005-10-20

Abstract

Abstract

Failure mechanism, bearing capacity, deformation and rupture forms etc of edge joints for which there are three different width height ratios are contrasted and analyzed through loading test with and without reinforced concrete flast beams. Validity of the existing design methods for edge joints is demonstrated for reinforced concrete flat beams. A breakthrough is made at the requirements for section width limit of flat beams in Code for Seismic Design of Buildings (GB 50011-2001)and a scientific basis is provided for design methods and engineering application of edge joints for reinforced concrete flat beams.
- reinforced concrete flat beams edge,
- joints,
- forced performance,
- failure mechanism