充填物对双圆倾斜孔洞岩石试样力学性能和破裂特征的影响

潘燕秋; 罗许林; 王国柱

doi:10.13204/j.gyjzG22062201

充填物对双圆倾斜孔洞岩石试样力学性能和破裂特征的影响

doi: 10.13204/j.gyjzG22062201

1. 郑州工业应用技术学院建筑工程学院, 郑州 451150;
2. 中国矿业大学深部岩土力学与地下工程国家重点实验室, 江苏徐州 221116

基金项目:

国家自然科学基金项目（51674100，51304067）。

详细信息

作者简介:
潘燕秋,女,1989年出生,硕士,讲师。电子信箱:15903686960@163.com

计量
- 文章访问数: 74
- HTML全文浏览量: 3
- PDF下载量: 2
- 被引次数: 0
出版历程
- 收稿日期: 2022-06-22
- 网络出版日期: 2023-10-17

Influence of Fillers on Mechanical Properties and Fracture Characteristics of Rock Specimens with Double Circular Inclined Cavities

1. School of Architectural Engineering, Zhengzhou University of Industrial Technology, Zhengzhou 451150, China;
2. State Key Laboratory for Geomechanics and Deep Underground Engineering, China University of Mining & Technology, Xuzhou 221116, China

摘要

摘要: 为研究充填物对双圆倾斜孔洞岩石试样力学性能和破裂特征的影响，采用离散元软件PFC^2D对不同倾角下包含不同强度双圆形充填物的岩石试样进行单轴压缩数值模拟。结果表明：充填物强度和倾角对岩石强度和变形特性有不同程度的影响，随着充填物强度的提高，倾角的影响逐渐减弱。当充填系数λ为0.6时，表现出最优的孔洞岩石加固效果，当充填系数大于0.6时，所有倾角试样的强度几乎保持恒定，并且所有倾角试样在充填孔洞之间均未表现出裂纹聚集现象。岩石试样的破坏过程可以用声发射计数、累计声发射计数和定位图进行表征。不同强度充填物试样的最终破坏模式可分为拉伸剪切混合破坏和剪切破坏。缺陷之间的裂纹聚集模式可分为未聚集、剪切聚集和拉伸剪切混合聚集。
- 双圆倾斜孔洞 /
- 充填物强度 /
- 单轴压缩 /
- 力学性能 /
- 破裂特征 /
- 声发射
Abstract: To study the influence of fillers on the mechanical properties and fracture characteristics of rock specimens with double inclined cavities, the numerical simulation of uniaxial compression was performed by discrete element software PFC^2D on rock specimens with double circular cavities filled with different strength fillers at different inclinations. The results indicated that the strength and inclination of fillers had different effects on the strength and deformation characteristics of rock. With the increase of the strength of fillers, the influence of inclinations was gradually weakened. When the filling coefficient λ was 0.6, the reinforcement effect for specimens with inclined cavities was best. When the filling coefficient was greater than 0.6, the strengths of all specimens with indined cavities were almost constant, and all the specimens did not present crack aggregation phenomena between cavities. The failure process of spcimens could be characterized by acoustic emission counting, cumulative acoustic emission counting and location maps. The final failure modes of specimens with different filler strengths could be divided into tensile-shear mixed failure and shear failure. The crack aggregation modes between defects could be divided into non-aggregation, shear aggregation and tensile-shear mixed aggregation.
- double circular inclined cavity /
- strength of filler /
- uniaxial compression /
- mechanical property /
- fracture characteristic /
- acoustic emission

HTML全文

参考文献(24)

[1]	DING Q F, LI B, SU H J, et al. Damage mechanism and stability analysis of rock mass in the high geo-stress tunnel subjected to excavation[J]. Geomatics, Natural Hazards and Risk, 2022, 13(1):75-93.
[2]	胡春宏, 郑春苗, 王光谦, 等. "西南河流源区径流变化和适应性利用"重大研究计划进展综述[J]. 水科学进展, 2022, 33(3):337-359.
[3]	罗许林, 王国柱, 郝亚勋. 考虑软弱夹层的含孔洞大理岩力学特性模拟分析[J]. 硅酸盐通报, 2021, 40(2):521-526.
[4]	徐士良. 单轴压缩下含孔洞混合片麻岩破裂试验研究[J]. 工业建筑, 2014, 44(11):108-111 ,171.
[5]	FAKHIMI A, CARVALHO F, ISHIDA T, et al. Simulation of failure around a circular opening in rock[J]. International Journal of Rock Mechanics and Mining Sciences, 2002, 39(4):507-515.
[6]	曾昭飞, 贺桂成, 戴兵, 等. 双孔洞式双裂隙类岩石力学特性及裂纹扩展分析[J]. 有色金属工程, 2021, 11(5):87-95.
[7]	卢海峰, 朱晨东, 刘泉声. 不同注浆材料作用下结构面剪切力学特性研究[J]. 岩石力学与工程学报, 2021, 40(9):1803-1811.
[8]	张贝贝, 伍廷亮, 王玉松, 等. 贵阳某隐伏横向溶洞地基处理的稳定性分析[J]. 工业建筑, 2022, 52(4):133-139.
[9]	王煜, 付建新, 汪杰. 单裂隙岩石力学特性的单轴加载速率效应及破裂细观机理研究[J]. 矿业研究与开发, 2020, 40(8):66-74.
[10]	赵国彦, 王恩杰, 吴浩, 等. 单轴压缩下孔洞砂岩细观破裂演化规律[J]. 中南大学学报(自然科学版), 2019, 50(8):1891-1900.
[11]	LI H, WONG L N Y. Influence of flaw inclination angle and loading condition on crack initiation and propagation[J]. International Journal of Solids and Structures, 2012, 49(18):2482-2499.
[12]	张庆文, 高保彬, 马龙军, 等. 含双孔洞砂岩裂纹演化规律研究[J]. 地下空间与工程学报, 2016, 12(增刊2):432-437.
[13]	陈彦安, 崔德山, 卞康, 等. 含共面双裂隙复合岩样力学特征的颗粒流分析[J]. 安全与环境工程, 2020, 27(2):140-148.
[14]	LEE H, JEON S.An experimental and numerical study of fracture coalescence in pre-cracked specimens under uniaxial compression[J]. International Journal of Solids and Structures,2011,48(6):979-999.
[15]	杨圣奇,张鹏超,滕尚永,等.含三裂隙巴西圆盘抗拉强度和裂纹特征试验研究[J].中国矿业大学学报,2021,50(1):90-98.
[16]	JESPERSEN C, MACLAUGHLIN M, HUDYMA N. Strength, deformation modulus and failure modes of cubic analog specimens representing macroporous rock[J]. International Journal of Rock Mechanics and Mining Sciences, 2010, 47(8):1349-1356.
[17]	左江江,李臣林,腾俊洋,等.充填物对含孔洞大理岩力学特性影响规律试验研究[J].工程科学学报,2018,40(7):776-782.
[18]	周亚楠, 朱泉企, 李地元, 等. 含充填椭圆形孔洞砂岩力学破坏特性试验研究[J]. 铁道科学与工程学报, 2019, 16(8):1938-1946.
[19]	CHANG X, DENG Y, Li Z H, et al. Crack propagation from a filled flaw in rocks considering the infill influences[J]. Journal of Applied Geophysics, 2018, 152:137-149.
[20]	CHANG X, TANG J, WANG G Z, et al. Mechanical performances of rock-like disc containing circular inclusion subjected to diametral compression[J]. Archives of Civil and Mechanical Engineering, 2018, 18(2):356-370.
[21]	李学华, 牛志军, 姚强岭, 等. 孔洞式三叉裂隙砂岩裂纹扩展特征颗粒流分析[J]. 煤炭学报, 2020, 45(11):3735-3747.
[22]	WU H, ZHAO G Y, Liang W Z. Investigation of cracking behavior and mechanism of sandstone specimens with a hole under compression[J/OL]. International Journal of Mechanical Sciences, 2019, 163[2022-06-22]. https://doi.org/10.1016/j.ijmecsci.2019.105084.
[23]	付玉凯, 王涛, 孙志勇, 等. 深部巷道围岩复合注浆加固技术[J]. 工矿自动化, 2022, 48(7):105-112.
[24]	ZHANG X P, ZHANG Q, WU S C. Acoustic emission characteristics of the rock-like material containing a single flaw under different compressive loading rates[J]. Computers and Geotechnics, 2017(83):83-97.