Design and Comprehensive Performance Analysis of Prefabricated Steel-Concrete Composite Structure Suitable for “Industrial Upstairs”

JIANG Xueming; TANG Jia; ZHU Wenbin; TAN Yihang; LIN Chenxiao; ZHANG Shuwei; ZHANG Chi; ZHUANG Liangdong

doi:10.3724/j.gyjzG25052804

Volume 56 Issue 9

Sep. 2026

Turn off MathJax

Article Contents

Article Navigation > INDUSTRIAL CONSTRUCTION > 2026 > 56(9): 165-172

JIANG Xueming, TANG Jia, ZHU Wenbin, TAN Yihang, LIN Chenxiao, ZHANG Shuwei, ZHANG Chi, ZHUANG Liangdong. Design and Comprehensive Performance Analysis of Prefabricated Steel-Concrete Composite Structure Suitable for “Industrial Upstairs”[J]. INDUSTRIAL CONSTRUCTION, 2026, 56(9): 165-172. doi: 10.3724/j.gyjzG25052804

Citation:

JIANG Xueming, TANG Jia, ZHU Wenbin, TAN Yihang, LIN Chenxiao, ZHANG Shuwei, ZHANG Chi, ZHUANG Liangdong. Design and Comprehensive Performance Analysis of Prefabricated Steel-Concrete Composite Structure Suitable for “Industrial Upstairs”[J]. INDUSTRIAL CONSTRUCTION, 2026, 56(9): 165-172. doi: 10.3724/j.gyjzG25052804

Citation:

JIANG Xueming, TANG Jia, ZHU Wenbin, TAN Yihang, LIN Chenxiao, ZHANG Shuwei, ZHANG Chi, ZHUANG Liangdong. Design and Comprehensive Performance Analysis of Prefabricated Steel-Concrete Composite Structure Suitable for “Industrial Upstairs”[J]. INDUSTRIAL CONSTRUCTION, 2026, 56(9): 165-172. doi: 10.3724/j.gyjzG25052804

PDF( 2215 KB)

Design and Comprehensive Performance Analysis of Prefabricated Steel-Concrete Composite Structure Suitable for “Industrial Upstairs”

doi: 10.3724/j.gyjzG25052804

1. Shenzhen SEZ Construction Group Co., Ltd., Shenzhen 518034, China;
2. Department of Civil Engineering, Tsinghua University, Beijing 100084, China;
3. Shenzhen Industrial Space Development Co., Ltd., Shenzhen 518034, China;
4. College of Civil Engineering, Hunan University, Changsha 410082, China

Received Date: 2025-05-28
Available Online: 2026-11-07

Abstract

Abstract

This study takes a representative “industrial upstairs” project in Shenzhen， Guangdong Province， as its research object. In response to the complex conditions of multi-story height， large story heights， heavy loads， and long spans typical of “industrial upstairs”， a prefabricated steel-concrete composite system based on concrete-filled steel-tube （CFST） columns， steel frame beams， and composite slabs without protruding rebars is proposed to resolve the inherent trade-offs among construction efficiency， structural performance， and cost control encountered in conventional prefabricated concrete and all-steel solutions. Through finite-element numerical analyses， the proposed composite system is compared with a conventional prefabricated concrete system in terms of structural modal characteristics， seismic inter-story drift， and floor vibration performance. A comparative study of material cost and construction schedule is also carried out based on site surveys and literature data. The results demonstrate that， while maintaining seismic safety and occupant comfort， the proposed system achieves a 14.8% reduction in material cost and a 24.7% reduction in construction time， yielding significant overall economic benefits.
- industrial upstairs,
- prefabricated construction,
- steel-concrete composite structure,
- composite slabs without protruding rebars,
- finite element method,
- economic analysis,
- construction period

FullText(HTML)

References(23)

References

[1]	聂建国,余志武. 钢-混凝土组合梁在我国的研究及应用[J]. 土木工程学报,1999,32（2）:3-8.
[2]	聂建国,陶慕轩,吴丽丽,等. 钢-混凝土组合结构桥梁研究新进展[J]. 土木工程学报,2012,45（6）:110-122.
[3]	ROSSI A,NICOLETTI R S,DE SOUZA A S C,et al. Lateral distortional buckling in steel-concrete composite beams:a review[J]. Structures,2020,27:1299-1312.
[4]	姜磊,刘永健,周绪红,等. 钢管混凝土组合结构桥梁设计原理与技术发展综述[J]. 中国公路学报,2025,38（3）:278-302.
[5]	孟姣,周仲煜,聂鑫,等. 电子芯片厂房装配式钢-混凝土组合结构方案设计与受力性能分析[J]. 工业建筑,2023,53（9）:62-68.
[6]	王晓羚. 以工业上楼优化城市产业发展空间的思考与建议[J]. 产城,2022（7）:48-51.
[7]	张伟,李晓丽,方园,等. 基于深圳市工业上楼项目装配式结构体系选型与关键技术研究[J]. 建筑结构,2024,54（24）:13-21.
[8]	丁祖昱.“工业上楼”已成产业地产新趋势[J]. 中国房地产,2022（11）:53-57.
[9]	史少微,周栋良,万力,等.“工业上楼”背景下产业园区的底层设计逻辑与模式探索:宝龙专精特新产业园[J]. 建筑技艺,2024,30（2）:52-59.
[10]	周国义,林伟,周书东,等. 绿色生态导向的“工业上楼”设计研究:以东莞松湖智谷产业园为例[J]. 重庆建筑,2022,21（9）:13-14.
[11]	方帮华,张凯超. 浅谈“工业上楼”背景下的高标厂房设计要点:以仲恺高新区某项目为例[J]. 工程建设与设计,2024（3）:20-22.
[12]	聂建国,陶慕轩,黄远,等. 钢-混凝土组合结构体系研究新进展[J]. 建筑结构学报,2010,31（6）:71-80.
[13]	聂鑫,赵鹤,聂建国,等. 采用板端不出筋预制板的装配式钢-混凝土组合楼盖体系:CN109667374B[P]. 2023-12-22.
[14]	聂建国,姜越鑫,聂鑫,等. 叠合板中桁架钢筋对预制板受力性能的影响[J]. 建筑结构学报,2021,42（1）:151-158.
[15]	杨悦,姜雪蔚,聂鑫,等. 开槽密拼混凝土叠合板受力性能试验研究[J]. 建筑结构学报,2023,44（7）:142-151.
[16]	聂建国,陈必磊,陈戈,等. 钢筋混凝土叠合板的试验研究[J]. 工业建筑,2003,33（12）:43-46.
[17]	梁岩,魏莹莹,冯浩琪,等. 大跨复杂斜柱钢框架施工全过程的模拟分析[J]. 工业建筑,2023,53（2）:75-80.
[18]	陶慕轩,聂建国. 考虑楼板空间组合作用的组合框架体系设计方法（Ⅱ）:刚度及验证[J]. 土木工程学报,2013,46（2）:42-53.
[19]	彭炜杰,陶慕轩. 非对称钢梁截面组合框架梁端极限状态下有效翼缘宽度研究[J]. 建筑结构学报,2018,39（5）:221-231.
[20]	中华人民共和国住房和城乡建设部. 建筑抗震设计标准:GB/T 50011—2010[S]. 北京:中国建筑工业出版社,2024.
[21]	史文彦. 上海地区高层装配式办公建筑结构方案比选与工程实例[J]. 建筑结构,2019,49（增刊1）:857-862.
[22]	胡松,蒋伟,卜凡杰. 某办公楼装配式混凝土框架-现浇核心筒与装配式钢框架-现浇核心筒结构方案及成本对比分析[J]. 建筑结构,2020,50（增刊1）:535-538.
[23]	陈敖宜,张肇毅,王卉,等. 建筑工业化及绿色模块建筑[J]. 工业建筑,2014,44（6）:108-111.