Full-Scale Test and Finite Element Analysis of Thick Plate Anchorage Zone with Multiple Blocks

HE Linyi; XIONG Xueyu; BAO Lianjin

doi:10.3724/j.gyjzG24061205

Volume 54 Issue 10

Oct. 2024

Turn off MathJax

Article Contents

Article Navigation > INDUSTRIAL CONSTRUCTION > 2024 > 54(10): 53-61

HE Linyi, XIONG Xueyu, BAO Lianjin. Full-Scale Test and Finite Element Analysis of Thick Plate Anchorage Zone with Multiple Blocks[J]. INDUSTRIAL CONSTRUCTION, 2024, 54(10): 53-61. doi: 10.3724/j.gyjzG24061205

Citation:

HE Linyi, XIONG Xueyu, BAO Lianjin. Full-Scale Test and Finite Element Analysis of Thick Plate Anchorage Zone with Multiple Blocks[J]. INDUSTRIAL CONSTRUCTION, 2024, 54(10): 53-61. doi: 10.3724/j.gyjzG24061205

Citation:

PDF( 18447 KB)

Full-Scale Test and Finite Element Analysis of Thick Plate Anchorage Zone with Multiple Blocks

doi: 10.3724/j.gyjzG24061205

HE Linyi¹,
XIONG Xueyu^{1,2
,
,},
BAO Lianjin³

1. College of Civil Engineering, Tongji University, Shanghai 200092, China;
2. Key Laboratory of Advanced Civil Engineering and Materials of China Ministry of Education, Shanghai 200092, China;
3. East China Architectural Design & Research Institute Co., Ltd., Shanghai 200002, China

Received Date: 2024-06-12
Available Online: 2024-11-06

Abstract

Abstract

In order to investigate the stress distribution characteristics of the prestressed concrete thick plate anchorage zone with multiple blocks, a full-scale test was carried out on the anchorage zone of the longest cantilever beam in the staircase of Shanghai Grand Opera House. The stress development of the reinforcement and concrete at the location of the tensile stress concentration was obtained by tensioning the prestressed tendons in batches of each block. The finite element model was established and the parameters were analyzed. The force flow characteristics and the influence of various factors on the local action effect in the anchorage zone were obtained. The results of test and finite element calculation showed that the local bending effect was not obvious in the thick plate anchorage zone, and only the last anchor block had the tie-back tension effect. The bursting effect, root tension effect and deviation force effect of each anchor block were independent of each other. The stress of the stirrups resisting horizontal shear in the plate accumulated with the tension of the prestressed tendons of each anchor block. The tensile stress flow caused by the bursting effect in the thick plate anchorage zone was mainly distributed in the tension end to the half of the block length. And there was a bifurcation phenomenon of the tie-back tension effect force. The tie-back effect and root tension effect decrease with the increase of the angle of the block. The local bending effect increased with the decrease of the plate thickness and the increase of the distance from the block to the front end of the plate.
- multiple blocks,
- anchorage zone,
- full-scale test,
- finite element model,
- force flow characteristics

FullText(HTML)

References(20)

References

[1]	JAIN M, KHAPRE R. Post-tensioned anchorage zone: a review[J]. Structures, 2022,46:31-48.
[2]	LI S, ZHENG W Z, ZHOU W, et al. Local compression capacity of ultra-high performance concrete containing coarse aggregate: testing and calculation method[J]. Journal of Building Engineering, 2023,76,107411.
[3]	LI C X, LI H C, FENG Z, et al. Local compression behavior of UHPFRC: experiments and bearing capacity calculation model[J]. Engineering Structures, 2023,292,116529.
[4]	冯峥, 李传习, 潘仁胜, 等.密集横隔板UHPC箱梁锚固区局部承压性能研究[J].工程力学,2020,37(5):94-103 ,119.
[5]	杨俊, 任伟, 冷景晨, 等.超高性能混凝土预应力锚固齿块承压性能研究[J].材料导报,2023,37(18):110-118.
[6]	杨俊, 杨明, 周建庭, 等.UHPC预应力锚固齿块承压性能及尺寸效应研究[J].铁道科学与工程学报,2023,20(1):265-277.
[7]	林波, 刘钊, 吕志涛. 体外预应力独立矩形齿块锚固区的拉压杆模型及配筋设计[J]. 工程力学,2011,28(12):59-64.
[8]	林波, 刘钊. 体外预应力角隅矩形齿块锚固区的拉压杆模型及配筋设计[J]. 工程力学,2012,29(4):155-160 ,167.
[9]	WOLLMANN G P. Anchorage zones in post-tensioned concrete structures[D]. Austin (TX): The University of Texas at Austin, 2002.
[10]	MARCHAO C, LUCIO V, GANZ H R, et al. Optimization of anchorage corner blisters for post tensioning tendons[J]. Structural Concrete Journal of the Fib, 2017,18(2):334-348.
[11]	LI C, FENG Z, PAN R, et al. Experimental and numerical investigation on the anchorage zone of prestressed UHPC box-girder bridge[J]. Journal of Bridge Engineering, 2020, 25(6),04020028.
[12]	陈建兴, 包联进, 刘康, 等.上海大歌剧院结构选型与设计[J]. 建筑结构,2022,52(9):42-47 ,73.
[13]	XIONG X Y, HE L Y, BAO L J. Experimental study on flexural behavior of full-scale retard-bonded prestressed UHPC variable section cantilever beams[J]. Engineering Structure, 2023,284,115943.
[14]	XIONG X Y, HE L Y, ZHOU Z W, et al. The bond-slip constitutive model of retard-bonded prestressing steel strand[J]. Construction and building materials, 2023,365,129995.
[15]	熊学玉, 肖启晟, 李晓峰. 缓粘结预应力研究综述[J]. 建筑结构,2018,48(8):83-90.
[16]	中华人民共和国住房和城乡建设部.混凝土结构设计规范:GB 50010—2010 [S].北京: 中国建筑工业出版社,2011.
[17]	李佩勋.缓粘结预应力综合技术的研究和发展[J].工业建筑,2008,38(11):1-5.
[18]	范蕴蕴,吴转琴,周建锋,等.缓粘结预应力钢筋用胶粘剂材料研究[J].工业建筑,2008,38(11):6-8 ,16.
[19]	刘钊, 吕志涛, 惠卓, 等.拉压杆模型在混凝土梁桥中应用与研究进展[J].中国工程科学,2008(10):14-21.
[20]	林波, 刘钊. 预应力齿板锚固区拉压杆模型及配筋设计[J].公路交通科技,2011,28(6):91-96.