Model Experimental Study on Relations Between Sinking Resistance and Vibration Acceleration of Steel Cylinders

JIANG Ying; YANG Shuangyu; CAO Yong; WANG Renjie; WANG Fengyun; WANG Yin

doi:10.3724/j.gyjzG23082103

Volume 56 Issue 3

Mar. 2026

Turn off MathJax

Article Contents

Article Navigation > INDUSTRIAL CONSTRUCTION > 2026 > 56(3): 270-276

JIANG Ying, YANG Shuangyu, CAO Yong, WANG Renjie, WANG Fengyun, WANG Yin. Model Experimental Study on Relations Between Sinking Resistance and Vibration Acceleration of Steel Cylinders[J]. INDUSTRIAL CONSTRUCTION, 2026, 56(3): 270-276. doi: 10.3724/j.gyjzG23082103

Citation:

JIANG Ying, YANG Shuangyu, CAO Yong, WANG Renjie, WANG Fengyun, WANG Yin. Model Experimental Study on Relations Between Sinking Resistance and Vibration Acceleration of Steel Cylinders[J]. INDUSTRIAL CONSTRUCTION, 2026, 56(3): 270-276. doi: 10.3724/j.gyjzG23082103

Citation:

JIANG Ying, YANG Shuangyu, CAO Yong, WANG Renjie, WANG Fengyun, WANG Yin. Model Experimental Study on Relations Between Sinking Resistance and Vibration Acceleration of Steel Cylinders[J]. INDUSTRIAL CONSTRUCTION, 2026, 56(3): 270-276. doi: 10.3724/j.gyjzG23082103

PDF( 1056 KB)

Model Experimental Study on Relations Between Sinking Resistance and Vibration Acceleration of Steel Cylinders

doi: 10.3724/j.gyjzG23082103

1. Offshore Oil Engineering Co., Ltd., Tianjin 300461, China;
2. State Key Laboratory of Coastal and Offshore Engineering, Dalian Technology University, Dalian 116024, China

Received Date: 2023-08-21
Available Online: 2026-04-11
Publish Date: 2026-03-20

Abstract

Abstract

The application of steel cylindrical foundations is expanding because of the development of offshore engineering， and vibration penetration is a crucial method for installing these foundations. To investigate the variation pattern of driving resistance in steel cylindrical foundations， a model testing system was employed to subject the foundation model within a model box to high-frequency vibration loading. A series of model foundation vibration penetration tests were conducted in stratified soil under varying maximum vibration accelerations. The study examined the effects of vibration acceleration on driving resistance， excess pore pressure variation， and vibration penetration rate. Through plate penetration tests， the static friction characteristics between the cylinder and soil were determined. A comparison was made between the current Mizutani method and actual measurements. The research findings highlighted the significant impact of the maximum vibration acceleration of the system on the vibration penetration process. Under identical site and equipment conditions， scenarios with higher maximum vibration acceleration exhibited faster vibration penetration rates. The driving resistance， relative to static penetration resistance， demonstrated a notable reduction that was positively correlated with vibration acceleration. Notably， driving resistance estimated through the Mizutani method displayed a substantial tendency to be overestimated， leading to conservatism in engineering applications.
- large diameter steel cylindrical foundation,
- model test,
- vibration acceleration

FullText(HTML)

References(16)

References

[1]	陈福全，汪金卫，李大勇，等. 高频液压振动锤打桩的应用概况与研究进展[J]. 岩土工程学报，2011，33（增刊2）:224-231.
[2]	HOLEYMAN A E. Soil behavior under vibratory driving[C]// Proceedings of the Int Conference on Vibratory Pile Driving and Deep Soil Compaction. Belgium:2002:3-19.
[3]	MEDVEDEV S R. The use of vibrators for driving steel sheet piling[J]. Civil Engineering and Public Works Review，1953，48:559.
[4]	卢雯珺，李斌，侯晋芳，等. 港珠澳大桥大直径钢圆筒多振锤联动安装的可打性[J]. Engineering，2023，20（1）:180-191.
[5]	袁孟全，徐文华，李永全，等. 大直径钢圆筒振动下沉设备及工艺的研究与应用[J]. 建筑机械，2004（2）:45-48.
[6]	孟凡利，孔令磊，刘昊槟，等. 大直径钢圆筒振动下沉工艺及设备的开发与应用[J]. 中国港湾建设，2015，35（7）:116-119.
[7]	DING X，SHI Y，CHEN R. et al. Friction analysis of large diameter steel cylinder penetration process using 3D-DEM[J/OL]. Granular Matter，2021，23[ 2023-08-21]. https://doi.org/10.1007/s10035-021-01086-6.
[8]	LU W J，LI B，LI J H，et al. Numerical simulation of dynamic response and failure of large-diameter thin-walled cylinder under vibratory penetration[J]. Ocean Engineering，2022，249:110936.
[9]	董德龙，李伟，沈晓鹏，等. 波浪和水流荷载作用下大直径钢圆筒贯入垂直度分析[J]. 石油和化工设备，2022，25（7）:61-65.
[10]	MIZUTANI Y. Calculation of vibratory installation of steel pipe pile[R]. Tokyo:Construction Machinery Research Corporation，1966.
[11]	胥新伟，刘亚平，高潮. 大直径钢圆筒振动下沉可行性分析方法[J]. 中国港湾建设，2016，36（4）:9-11.
[12]	李业勋，张奎，沈永兴，等. 海上高频振动打桩的动侧摩阻力及可打性[J]. 中国港湾建设，2015，35（3）:33-36.
[13]	王伟. 振动沉桩动力学分析和试验研究[D]. 石家庄:河北科技大学，2012.
[14]	夏唐代，郑晴晴，陈秀良. 基于累积动应力水平的间歇加载下超孔隙水压预测[J]. 岩土力学，2019，40（4）:1483-1490.
[15]	王永洪，张明义，刘俊伟，等. 超孔隙水压力对低塑性黏性土桩土界面抗剪强度的影响[J]. 岩土力学，2018，39（3）:831-838.
[16]	NOGAMI T，REN F，CHEN J W，et al. Vertical vibration of pile in vibration-induced excess pore pressure field[J]. Journal of Geotechnical and Geoenvironmental Engineering，1997，123（5）:422-429.