Source Journal of Chinese Scientific and Technical Papers
Included as T2 Level in the High-Quality Science and Technology Journals in the Field of Architectural Science
Core Journal of RCCSE
Included in the CAS Content Collection
Included in the JST China
Indexed in World Journal Clout Index (WJCI) Report
Zhang Tiejun, Yan Yuelan. STUDY ON LOCALIZATION OF MANUFACTURE OF UNDERRELAXATION PRESTRESSED STEEL SHANDS FOR CONTAINMENT OF Ling'ao NUCLEAR POWER PLANT (PHASE-Ⅱ) AND ITS USE[J]. INDUSTRIAL CONSTRUCTION, 2009, 39(4): 61-66. doi: 10.13204/j.gyjz200904015
Citation: WANG Yanxing, GAO Yu, YANG Guohui, NIU Hengmao, LIU Bin, REN Xuedan. Experimental Study on Freeze-Thaw Characteristics of Weathered Arsenic Sandstone Soil Improved by Microbial-Induced Calcium Precipitation[J]. INDUSTRIAL CONSTRUCTION, 2024, 54(9): 10-18. doi: 10.3724/j.gyjzG22112006

Experimental Study on Freeze-Thaw Characteristics of Weathered Arsenic Sandstone Soil Improved by Microbial-Induced Calcium Precipitation

doi: 10.3724/j.gyjzG22112006
  • Received Date: 2022-11-20
    Available Online: 2024-10-18
  • Severe soil erosion in arsenic sandstone areas not only reduces the local vegetation and deteriorates the ecological environment, but also the debris formed by weathered arsenic sandstone constantly migrates into the Yellow River and other rivers, becoming the main source of coarse sediment in the middle and upper reaches of the Yellow River. Therefore, the microbial-induced calcium precipitation technique was applied to arsenic sandstone and its weathered soil to cure and improve their water disintegration. On the basis of the mineralization and cementation for weathered soil of arsenic sandstone, macroscopic mechanical properties tests combined with microstructural tests of pore sizes were conducted to study the property changes and deteriorative mechanisms of the weathered soil after freeze-thaw cycles in the salt corrosion environment. The test results indicated that the strength of the soil-mineralized specimens decreased after freeze-thaw cycles in the salt corrosion environment, and the internal pores changed continuously with different sizes of pores developing or transforming into each other. The attenuation in the intensity properties of soil-mineralized specimens in the salt corrosion environment was greater than that in the deionized water environment, and the attenuation in the intensity properties of soil-mineralized specimens in the composite salt environment was greater than that in the single salt environment. After five rounds of freeze-thaw cycles in the mixed salt environment, the soil-mineralized specimens were damaged and the freeze-thaw resistance was reduced to 0.125 6, and simultaneously, the freeze-thaw resistance of the soil-mineralized specimens in the deionized water environment was reduced to 0.416 7 in the same period, a difference was nearly three times; the porosity of the soil-mineralized specimens increased as a result of the frost heave action, wet-dry action and the destruction of inter-particle connections, and the cumulative ratio of change in different types of pores increased with the round of freeze-thaw cycles. The reduction in strength of the soil-mineralized specimens was actually a macroscopic reflection of the reduction in the mechanical properties of the internal skeleton. The macroscopic strength dropped constantly reducing with the resistance to frost heaving of pore skeleton of the soil-mineralized specimens. As the potential deformation resistance of soil-mineralized specimens was released, the volume expansion coefficient and pore shrinkage coefficient of ice continued to increase. Due to the frequent internal bonding damage and weak deformation ability of the pore skeleton, the mixed salt had the highest expansion coefficient and the lowest shrinkage coefficient.
  • [1]
    张若曦,秦富仓,李龙,等.砒砂岩区坡面微地貌变化与侵蚀产沙的响应关系[J].水土保持研究,2022,29(6):21-27

    ,35.
    [2]
    王丹,陈超.砒砂岩区沙棘生态工程建设的实践与思考[J].中国水土保持,2022(9): 51-54.
    [3]
    王燕星,李驰,葛晓东,等.黄河流域内蒙古段砒砂岩风化土微生物矿化改良的试验研究[J].岩土力学,2022,43(3):708-718.
    [4]
    何想, 马国梁, 汪杨, 等. 基于微流控芯片技术的微生物加固可视化研究[J]. 岩土工程学报, 2020, 42(6): 1005-1012.
    [5]
    李涛,赖小颖,黄昊,等.新型微生物固载材料的结晶效果研究[J].工业建筑, 2022, 52(11):84-90.
    [6]
    何稼, 楚剑, 刘汉龙, 等. 微生物岩土技术的研究进展[J]. 岩土工程学报, 2016, 38(4): 643-653.
    [7]
    刘汉龙, 肖鹏, 肖杨, 等. 微生物岩土技术及其应用研究新进展[J]. 土木与环境工程学报(中英文), 2019, 41(1): 1-14.
    [8]
    张茜, 叶为民, 刘樟荣, 等. 基于生物诱导碳酸钙沉淀的土体固化研究进展[J]. 岩土力学, 2022,43(2): 345-357.
    [9]
    董博文, 刘士雨, 俞缙, 等. 基于微生物诱导碳酸钙沉淀的天然海水加固钙质砂效果评价[J]. 岩土力学, 2021, 42(4): 1104-1114.
    [10]
    WHIFFIN V S, VAN PAASSEN L A, HARKES M P. Microbial carbonate precipitation as a soil improvement technique[J]. Geomicrobiology Journal, 2007, 24(5): 417-423.
    [11]
    DEJONG J T, SOGA K, KAVAZANJIAN E, et al. Biogeochemical processes and geotechnical applications: progress, opportunities and challenges[J]. Geotechnique, 2013, 63(4): 287-301.
    [12]
    王涛.微生物菌群和植物联合改良砒砂岩的试验研究[D].南京:东南大学,2020.
    [13]
    刘汉龙,张宇,郭伟,等.微生物加固钙质砂动孔压模型研究[J].岩石力学与工程学报,2021,40(4):790-801.
    [14]
    刘汉龙,肖鹏,肖杨,等.MICP胶结钙质砂动力特性试验研究[J].岩土工程学报,2018,40(1):38-45.
    [15]
    刘汉龙,马国梁,赵常,等.微生物加固钙质砂的宏微观力学机理[J].土木与环境工程学报(中英文),2020,42(4):205-206.
    [16]
    毕慈芬,王富贵.砒砂岩地区土壤侵蚀机理研究[J]. 泥沙研究, 2008, 2(1): 70-73.
    [17]
    陈溯航.紫红色砒砂岩冻融循环下变形特性及微观结构试验研究[D]. 呼和浩特: 内蒙古农业大学, 2017.
    [18]
    程瑶佳,唐朝生,泮晓华,等.微生物矿化作用(MICP)-铺砂联合提高黄土抗侵蚀性试验研究[J].防灾减灾工程学报,2022,42(5):1010-1018.
    [19]
    常书铭,干飞,曹腾,等.脲酶矿化强化黄土抗水蚀性能演变特征试验研究[J].水利规划与设计,2022(10):111-116.
    [20]
    HARDIN B O, EVICH V P. Shear modulus and damping in soils: design equations and curves[J]. Journal of Soil Mechanics and Foundations, 1972, 98(7): 667-692.
    [21]
    孙洋, 刁波. 冻融与化学物质腐蚀环境下混凝土力学性能退化的试验研究[C]//全国结构工程学术会议论文集. 2008.
    [22]
    王燕星, 李驰, 高利平, 等.低磁场核磁共振测定盐环境下微生物诱导碳酸钙沉积矿化材料的孔隙结构[J]. 工业建筑, 2020, 50(12): 1-7.
    [23]
    LI C, WANG Y X, ZHOU T J, et al. Sulfate acid corrosion mechanism of biogeomaterial based on MICP technology[J]. Journal of Materials in Civil Engineering, 2019, 31(7): 1-11.
    [24]
    贾海梁. 多孔岩石及裂隙岩体冻融损伤机制的理论模型和试验研究[D]. 武汉: 中国地质大学, 2016.
    [25]
    郭耀, 李刚, 贾成艳, 等. 冰力学参数的超声波测试研究[J]. 极地研究, 2016, 28(1): 152-157.
  • Relative Articles

    [1]ZHOU Zhijun, TIAN Yeqing, ZHANG Mingyi, WANG Kangchao, ZHU Shanshan. Analysis on Bearing Characteristics of Pile Groups with Post-Grouting at Pile Ends in Loess Areas[J]. INDUSTRIAL CONSTRUCTION, 2024, 54(3): 182-190. doi: 10.3724/j.gyjzG22090209
    [2]ZHOU Peng, MA Hailong. NUMERICAL ANALYSIS ON LOAD TRANSFER OF TENSILE PILES AND BOTTOM-UPLIFTED PILES[J]. INDUSTRIAL CONSTRUCTION, 2021, 51(3): 147-152. doi: 10.13204/j.gyjzG20040901
    [3]MA Hailong, BAO Yanran, MA Yufei, YAO Wenhong. LOAD-TRANSFER LAWS OF A SINGLE PILE AND DETERMINATION OF REASONABLE POSITIONS FOR GROUTING ON PILE SIDES[J]. INDUSTRIAL CONSTRUCTION, 2021, 51(9): 173-176,196. doi: 10.13204/j.gyjzG20091705
    [4]Chen Lanyun, Shu Zhong, Yi Nangai. NUMERICAL SIMULATION OF VERTICAL BEARING CAPACITY OF POST-GROUTING BORED PILES[J]. INDUSTRIAL CONSTRUCTION, 2011, 41(7): 78-81. doi: 10.13204/j.gyjz201107018
    [5]Qiang Xiaojun, Wan Changhong, Jiang Huihuang. ANALYSIS AND COMPARISON OF MODEL TEST REINFORCED EMBANKMENT BY PILE NET WITH PILE CAP[J]. INDUSTRIAL CONSTRUCTION, 2009, 39(5): 75-80. doi: 10.13204/j.gyjz200905016
    [6]Shen Baohan, Wang Haiyan, Liu Zhenliang, He Dexin. TEST STUDY OF DX PILE WITH FOUR BULBS AT XI'AN SXD PROJECT[J]. INDUSTRIAL CONSTRUCTION, 2009, 39(2): 1-7. doi: 10.13204/j.gyjz200902001
    [7]Shen Baohan. DX PILE AND ITS SEVERAL PROBLEMS OF VERTICAL BEARING CAPACITIES[J]. INDUSTRIAL CONSTRUCTION, 2009, 39(8): 84-95. doi: 10.13204/j.gyjz200908022
    [8]Dong Jinrong. INFLUENCE OF PILE BOTTOM SLIME ON SKIN FRICTION AND BEARING CAPACITY ESTIMATION TO PILE[J]. INDUSTRIAL CONSTRUCTION, 2009, 39(4): 93-97. doi: 10.13204/j.gyjz200904021
    [9]Yi Yaolin, Liu Songyu. NUMERICAL ANALYSIS OF BEHAVIOR OF T-SHAPED CEMENT-SOIL DEEP MIXING PILE COMPOSITE FOUNDATION UNDER EMBANKMENT LOADS[J]. INDUSTRIAL CONSTRUCTION, 2008, 38(11): 63-68. doi: 10.13204/j.gyjz200811016
    [10]Shen Baohan, Sun Junping, Wang Yan. THE CALCULATION OF VERTICAL COMPRESSIONAL BEARING CAPACITY OF DX PILE[J]. INDUSTRIAL CONSTRUCTION, 2008, 38(5): 18-22. doi: 10.13204/j.gyjz200805004
    [11]Shen Baohan. THE CHARACTERISTICS OF LOAD TRANSFER OF DX PILES[J]. INDUSTRIAL CONSTRUCTION, 2008, 38(5): 5-12. doi: 10.13204/j.gyjz200805002
    [12]Luo Chunbo, Zhu Xiangrong, Kong Qinghua, Sun Jinyue. PILE-SOIL INTERACTION ANALYSIS OF O-CELL TESTING PILE BASED ON ELASTIC THEORY[J]. INDUSTRIAL CONSTRUCTION, 2007, 37(8): 60-63. doi: 10.13204/j.gyjz200708016
    [13]Zhang Shimin, Yu Feng. LOAD TRANSFER AND BEARING CAPACITY OF PILES JACKED INTO SANDY DEPOSITS[J]. INDUSTRIAL CONSTRUCTION, 2007, 37(5): 61-64. doi: 10.13204/j.gyjz200705016
    [14]Peng Fuming, Yue Qingrui, Hao Jiping, Yang Yongxin. LOAD TRANSFER ANALYSIS OF STEEL STRUCTURES REPAIRED WITH FRP[J]. INDUSTRIAL CONSTRUCTION, 2005, 35(8): 26-30,109. doi: 10.13204/j.gyjz200508006
    [15]Pei Jie, Shui Weihou, Cao Hui. NEW MODEL OF LONG PILE LOAD TRANSFER FOR SOFT FOUNDATION IN SHANGHAI[J]. INDUSTRIAL CONSTRUCTION, 2005, 35(7): 50-54,49. doi: 10.13204/j.gyjz200507015
    [16]Li Haiwang, Ju Yuwen, Zhao Mingwei, Liang Renwang. ANALYSIS AND FIELD STATIC LOADING TESTS OF CAST-IN-PLACE PILES WITH BRANCHES AND PLATES[J]. INDUSTRIAL CONSTRUCTION, 2004, 34(3): 21-23. doi: 10.13204/j.gyjz200403006
    [17]Wu Xiongzhi, An Xinzheng, Wu Ruizhi. STUDY ON BEARING MECHANISM OF SOIL-CEMENT PILE[J]. INDUSTRIAL CONSTRUCTION, 2004, 34(6): 42-43,41. doi: 10.13204/j.gyjz200406014
    [18]Chun Lun, Wang Haiyan, Shen Baohan, He Dexin, Sun Junping. FULL-SCALE TEST STUDY ON UNIT SHAFT RESISTANCE AND UNIT END RESISTANCE OF DX PILES CAST-IN-SITU[J]. INDUSTRIAL CONSTRUCTION, 2004, 34(3): 15-18,39. doi: 10.13204/j.gyjz200403004
    [19]Chen Lun, Wang Haiyan, Shen Baohan, He Dexin, Sun Junping. FULL-SCALE TEST STUDY ON BEARING MECHANISM AND LOAD TRANSMISSION MODE OF DX PILES CAST-IN-SITU[J]. INDUSTRIAL CONSTRUCTION, 2004, 34(3): 5-8. doi: 10.13204/j.gyjz200403002
  • Created with Highcharts 5.0.7Amount of accessChart context menuAbstract Views, HTML Views, PDF Downloads StatisticsAbstract ViewsHTML ViewsPDF Downloads2024-042024-052024-062024-072024-082024-092024-102024-112024-122025-012025-022025-0302.557.51012.515
    Created with Highcharts 5.0.7Chart context menuAccess Class DistributionFULLTEXT: 18.9 %FULLTEXT: 18.9 %META: 81.1 %META: 81.1 %FULLTEXTMETA
    Created with Highcharts 5.0.7Chart context menuAccess Area Distribution其他: 8.5 %其他: 8.5 %China: 5.7 %China: 5.7 %北京: 4.7 %北京: 4.7 %十堰: 0.9 %十堰: 0.9 %南京: 0.9 %南京: 0.9 %嘉兴: 0.9 %嘉兴: 0.9 %常州: 0.9 %常州: 0.9 %张家口: 5.7 %张家口: 5.7 %扬州: 2.8 %扬州: 2.8 %杭州: 1.9 %杭州: 1.9 %温州: 0.9 %温州: 0.9 %漯河: 4.7 %漯河: 4.7 %芒廷维尤: 31.1 %芒廷维尤: 31.1 %芝加哥: 0.9 %芝加哥: 0.9 %西宁: 17.9 %西宁: 17.9 %西雅图: 0.9 %西雅图: 0.9 %连云港: 1.9 %连云港: 1.9 %邯郸: 0.9 %邯郸: 0.9 %郑州: 2.8 %郑州: 2.8 %阳泉: 4.7 %阳泉: 4.7 %其他China北京十堰南京嘉兴常州张家口扬州杭州温州漯河芒廷维尤芝加哥西宁西雅图连云港邯郸郑州阳泉

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views (56) PDF downloads(0) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return