Source Journal for Chinese Scientific and Technical Papers
Core Journal of RCCSE
Included in JST China
Included in the Hierarchical Directory of High-quality Technical Journals in Architecture Science Field
Volume 54 Issue 7
Jul.  2024
Turn off MathJax
Article Contents
LU Xianlong, QIAN Zengzhen, YANG Wenzhi. Influencing Factors and Corresponding Values of Ultimate Shaft Resistance and Tip Resistance Coefficients for Piles of Rock-Socketed Sections[J]. INDUSTRIAL CONSTRUCTION, 2024, 54(7): 181-187. doi: 10.3724/j.gyjzG22091705
Citation: LU Xianlong, QIAN Zengzhen, YANG Wenzhi. Influencing Factors and Corresponding Values of Ultimate Shaft Resistance and Tip Resistance Coefficients for Piles of Rock-Socketed Sections[J]. INDUSTRIAL CONSTRUCTION, 2024, 54(7): 181-187. doi: 10.3724/j.gyjzG22091705

Influencing Factors and Corresponding Values of Ultimate Shaft Resistance and Tip Resistance Coefficients for Piles of Rock-Socketed Sections

doi: 10.3724/j.gyjzG22091705
  • Received Date: 2022-09-17
    Available Online: 2024-08-16
  • The assumed composition of the ultimate compression and uplift bearing capacity of rock-socketed piles is essentially the same in current Chinese codes. In addition, the same method is adopted to calculate the ultimate shaft resistance and tip resistance of piles for rock-socketed sections by using the ultimate shaft resistance coefficient ξs and tip resistance coefficient ξb to multiply uniaxial compressive strength fucs of rock. However, the values of the aforementioned ξs and ξb in the criteria are quite different. Based on test data of rock-socketed piles under compression loads, influence laws of pile diameters, rock-socketed depths, ratios of rocketed depths to diameters, and uniaxial strength of rock on ultimate shaft resistance and shaft resistance coefficients as well as ultimate tip resistance and ultimate tip resistance coefficients of rock-socketed sections were analyzed. It was indicated that there was no significant correlation between pile diameters and ultimate shaft resistance coefficients as well as ultimate tip resistance coefficients of rock-socketed piles. With increase in rock-socketed depths and ratios of rocketed depths to diameters, the ultimate shaft resistance and ultimate tip resistance of rock-socketed piles generally decreased. There was an optimum rock-socketed depths and a ratio of rocketed depths to diameters, which could make the ultimate shaft resistance and tip resistance of rock-socketed sections played their roles most fully and coordinately. The ultimate shaft resistance and tip resistance increased but the ultimate shaft resistance coefficients and tip resistance coefficients decreased with increase in the uniaxial compressive strength of rock. The strength of rock was a significant factor to determine the coefficients of shaft resistance and tip resistance. There was a good statistical correlation between them, which could be respectively fitted as ξs=0.436 fucs-0.68 and ξb=4.183 fucs-0.79.
  • loading
  • [1]
    刘衡, 王铁行, 罗扬. 嵌岩桩承载性状研究现状综述[J]. 工业建筑, 2013, 43 (增刊1): 416-420.
    [2]
    周予启, 阎培渝. 超大直径嵌岩桩沉降长期效应研究及实测[J]. 工业建筑, 2020, 50(9): 106-111.
    [3]
    王卫东, 吴江斌, 王向军. 嵌岩桩嵌岩段侧阻和端阻综合系数研究[J]. 岩土力学, 2015, 36(增刊2): 289-295.
    [4]
    中华人民共和国住房和城乡建设部.建筑地基基础设计规范:GB 50007—2011[S]. 北京:中国建筑工业出版社.2011.
    [5]
    史佩栋, 梁晋渝. 嵌岩桩竖向承载力的研究[J]. 工业建筑, 1993, 23(7):38-43.
    [6]
    中华人民共和国建设部.建筑桩基技术规范:JGJ 94—2008[S]. 北京:中国建筑工业出版社, 2008.
    [7]
    中华人民共和国交通运输部. 码头结构设计规范:JTS 167—2018[S]. 北京:人民交通出版, 2018.
    [8]
    中华人民共和国行业标准.公路桥涵地基与基础设计规范:JTG 3363—2019[S]. 北京:人民交通出版社, 2019.
    [9]
    中华人民共和国国家铁路局.铁路桥涵地基和基础设计规范:TB 10093—2017[S]. 北京:中国铁道出版社, 2005.
    [10]
    鲁先龙, 乾增珍, 杨文智, 等. 嵌岩桩嵌岩段的岩石极限侧阻力系数[J]. 土木建筑与环境工程, 2018, 40(6): 29-38.
    [11]
    鲁先龙, 乾增珍, 杨文智, 等. 嵌岩桩的极限端阻力发挥特性及其端阻力系数[J].土木与环境工程学报(中英文), 2019, 41(4): 26-35.
    [12]
    WILLIAMS A F, PELLS P J N. Side resistance rock sockets in sandstone, mudstone, and shale[J]. Canadian Geotechnical Journal, 1981, 18(4): 502-513.
    [13]
    刘金砺.桩基础设计与计算[M]. 北京: 中国建筑工业出版社, 1990. 85-95.
    [14]
    刘树亚, 刘祖德. 嵌岩桩理论研究和设计中的几个问题[J]. 岩土力学, 1999, 20(4): 86-92.
    [15]
    刘兴远, 郑颖人, 林文修.关于嵌岩桩理论研究的几点认识[J]. 岩土工程学报, 1998, 20(5):118-119.
    [16]
    许锡宾, 周亮, 刘涛. 大直径嵌岩桩单桩承载性能的有限元分析[J]. 重庆交通大学学报(自然科学版), 2010, 29(6): 942-946.
    [17]
    ROWE R K, ARMITAGE H H. Theoretical solutions for axial deformation of drilled shifts in rock[J]. Canadian Geotechnical Journal, 1987, 24(1): 114-125.
    [18]
    ROSENBERG P, JOURNEAUX N L. Friction and end bearing tests on bed-rock for high capacity socket design[J]. Canadian Geotechnical Journal, 1976, 13(3): 324-333.
    [19]
    HORVATH R G, KENNEY T C, KOZICKI P. Methods of improving the performance of drilled piers in weak rock.[J]. Canadian Geotechnical Journal, 1983, 20(4), 758-772.
    [20]
    REESE L C, O’NEILL M W. Drilled shafts: Construction procedures and design methods[R]. Publication No. ADSC-TL-4. Washington, D.C.: International Association of Foundation Drilling, Federal Highway Administration, 1988.
    [21]
    ZHANG L. Analysis and design of axially loaded drilled shafts socketed into rock[D]. Cambridge: MIT, 1997.
    [22]
    CARRUBBA P. Skin friction of large-diameter piles socketed into rock[J]. Canadian Geotechnical Journal, 1997, 34(2): 230-240.
    [23]
    TENG W C. Foundation design[M]. Englewood Cliffs: Prentice-Hall, Inc., 1962.
    [24]
    COATES D F. Rock mechanics principles[M]. Ottawa: Energy Mines and Resources, 1967.
    [25]
    ZHANG L, EINSTEIN H H. End bearing capacity of drilled shafts in rock[R]. Journal of Geotechnical and Geoenvironmental Engineering, 1998, 124(7): 574-584.
    [26]
    VIPULANANDAN C., HUSSAIN A, USLUOGULARI O. Parametric study of open core-hole on the behavior of drilled shafts socketed in soft rock[C]//CAMP W, CASTELLI R, Laefer D F, et al. Contemporary Issues in Deep Foundations: Proceedings of Geo-Denver 2007. Reston: American Society for Civil Engineers, 2007:18-21.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views (24) PDF downloads(0) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return