Citation: | LIU Xinhu, PAN Zuanfeng, ZHANG Haipeng, TAO Jinghong. Influence of Printing Path and Bonding Surface Characteristics on Bearing Capacity of 3D Printed Concrete Beams[J]. INDUSTRIAL CONSTRUCTION, 2024, 54(1): 56-60. doi: 10.3724/j.gyjzG21091409 |
[1] |
I HAGER, A GOLONKA, and R PUTANOWICZ, 3D printing of buildings and building components as the future of sustainable construction? [J], Procedia Engineering 151, 292299(2016).
|
[2] |
朱彬荣, 潘金龙, 周震鑫, 等. 3D打印技术应用于大尺度建筑的研究进展[J]. 材料导报, 2018, 32(23): 4150-4159.
|
[3] |
LEIGH S J BRADLEY R J, PURSSELL C P, et al. A simple, low-cost conductive composite material for 3D printing of electronic sensors [J/OL]. PLoS ONE, 2012, 7(11). [2021-09-14]. https://doi.org/lo3711journalPone.0049365.
|
[4] |
刘致远, 王振地, 王玲, 等. 3D打印水泥净浆层间拉伸强度及层间剪切强度[J]. 硅酸盐学报, 2019, 47(5): 648-652.
|
[5] |
LET T, AUSTINS A, LIM S, et al. Hardened properties of high- performance printing concrete [J]. Cement & Concrete Research, 2012, 42(3): 558-566.
|
[6] |
P FENG, X MENG, and J F CHEN, et al.Mechanical properties of structures 3D printed with cementitious powders [J], Construction and Building Materials 93, 486497(2015).
|
[7] |
PANDA B, PAUL S C, MOHAMED N, et al. Measurement of tensile bond strength of 3D printed geopolymer mortar [J]. Measurement, 113: 108-116.
|
[8] |
M HAMBACH, and D VOLKMER, Properties of 3D-printed fiber-reinforced Portland cement paste [J], Cement and Concrete Composites 79, 6270(2017).
|
[9] |
MAZARS J, PIJAUDIER G. Continuum damage theory: application to concrete [J]. Journal of Engineering Mechanics, 1989, 115(2): 347-349.
|
[10] |
中华人民共和国住房和城乡建设部. 混凝土结构设计规范: GB 50010—2010[S]. 北京: 中国建筑工业出版社, 2010.
|
[11] |
葛杰, 马荣全, 苗冬梅, 等. 3D打印建筑材料层间粘结性能试验研究[J]. 建筑结构, 2017, 47(4): 49-52.
|