Mechanical Properties of Stainless-Clad Bimetallic Steel Bars with Different Corrosion Forms

HUA Jianmin; HU Guosong; WANG Fei; XUE Xuanyi; WANG Neng

doi:10.13204/j.gyjzG22112002

Volume 53 Issue 5

May 2023

Turn off MathJax

Article Contents

Abstract

References

Article Navigation > INDUSTRIAL CONSTRUCTION > 2023 > 53(5): 179-186

Bai Feng. DISCUSSION ON ASEISMIC CONCEPTUAL DISIGN OF MIDDLE AND PRIMARY SCHOOLS' BUILDINGS IN CHINA FOR PREVETING COLLAPSE[J]. INDUSTRIAL CONSTRUCTION, 2009, 39(1): 42-46. doi: 10.13204/j.gyjz200901008

Citation:

HUA Jianmin, HU Guosong, WANG Fei, XUE Xuanyi, WANG Neng. Mechanical Properties of Stainless-Clad Bimetallic Steel Bars with Different Corrosion Forms[J]. INDUSTRIAL CONSTRUCTION, 2023, 53(5): 179-186. doi: 10.13204/j.gyjzG22112002

Citation:

PDF( 11522 KB)

Mechanical Properties of Stainless-Clad Bimetallic Steel Bars with Different Corrosion Forms

doi: 10.13204/j.gyjzG22112002

HUA Jianmin^1,2,
HU Guosong¹,
WANG Fei^{1
,
,},
XUE Xuanyi^1,2,
WANG Neng³

1. School of Civil Engineering, Chongqing University, Chongqing 400045, China;
2. Key Laboratory of New Technology for Construction of Cities in Mountain Area, Chongqing University, Chongqing 400045, China;
3. School of Management Science and Real Estate, Chongqing University, Chongqing 400045, China

Received Date: 2022-11-20

Abstract

Abstract

The stainless-clad bimetallic steel bar (SCBSB) is a new type of weather-resistant steel bar composed of carbon steel core bars and stainless-steel cladding. The metallurgical combination of the two is realized through hot rolling and other processes, so that it has both the strength of the core bar and the corrosion resistance of the cladding, which has broad prospects in practical engineering applications. Taking SCBSB which is consisted with the S304 stainless steel as the cladding and the HRB400 carbon steel bar as the substrate as the research object, according to the actual service state of reinforcement, three types of corrosion are designed, that’s, uniform corrosion, damaged cladding corrosion and non-uniform corrosion. Three types of corrosion forms of SCBSB samples were obtained by electrochemical accelerated corrosion test. Then the tensile test was performed on the above samples. The research had shown that the mechanical properties of SCBSB decreased linearly due to corrosion. The characteristic of stress-strain curve also changed after three forms of corrosion, of which the disappearance of the yield platform of the damaged cladding corrosion sample occurred first. The evolution law of mechanical properties and toughness of SCBSB with three corrosion forms was quantitatively described by prediction models, which could predict the mechanical properties and toughness of SCBSB with three corrosion forms at any degree of corrosion. Finally, according to the test results and the requirements of GB/T 1499.2—2018, the paper suggested that the corrosion degree of SCBSB should be controlled below 10.7% to ensure the service performance of the structure.
- stainless-clad bimetallic steel bars,
- corrosion form,
- mechanical properties,
- toughness

FullText(HTML)

References(23)

References

[1]	金伟良,钟小平.结构全寿命的耐久性与安全性、适用性的关系[J].建筑结构学报,2009,30(6):1-7.
[2]	钟小平,金伟良.钢筋混凝土结构基于耐久性的可靠度设计方法[J].土木工程学报,2016,49(5):31-39.
[3]	XUN W, YE D H, et al. Corrosion characteristics of S23043 duplex stainless steel bars [J]. Construction and Building Materials,2018(178):135-143.
[4]	冯光岩,金祖权,熊传胜,等.海洋潮汐区暴露700 d带裂缝混凝土中耐蚀钢筋的锈蚀行为[J].材料导报,2020,34(8):8064-8070.
[5]	陆春华,赵羽习,金伟良.锈蚀钢筋混凝土保护层锈胀开裂时间的预测模型 [J].建筑结构学报,2010,31(2):85-92.
[6]	付传清,何家豪,金贤玉,等.带横向荷载裂缝钢筋混凝土梁的钢筋锈蚀形态研究[J].建筑结构学报,2019,40(1):123-131.
[7]	MOHAMED A R, HILAL E H, TAMER E M,et al. Durability of basalt FRP reinforcing bars in alkaline solution and moist concrete environments [J/OL].Construction and Building Materials,2020(243)[2022-11-20].https://doi.org/10.1016/j.conbuildmat.2020.118258.
[8]	顾兴宇, 沈新, 李海涛. 高模量玄武岩纤维-钢丝复合筋的力学性能[J]. 长沙理工大学学报(自然科学版),2010, 7(3): 19-24.
[9]	董志强,吴刚.FRP筋增强混凝土结构耐久性能研究进展[J].土木工程学报,2019,52(10):1-19 ,29.
[10]	CHEN Y, DAVALOS J F, RAY I, et al. Accelerated aging tests for evaluations of durability performance of FRP reinforcing bars for concrete structures [J]. Composite Structures, 2007, 78(1): 101-111.
[11]	ZHOU Z D, QIAO P Z. Bond behavior of epoxy-coated rebar in ultra-high performance concrete [J]. Construction and Building Materials, 2018,182:406-417.
[12]	董伟. 环氧涂层钢筋在海工混凝土结构中的腐蚀行为研究[D].西安:长安大学,2019.
[13]	吕钊,李伟华,宗成中.海洋环境下混凝土桥梁涂层防护技术的研究与进展[J].公路交通科技,2010(增刊1):130-134.
[14]	JYOTI B,SAMANTHA L, et al.Accelerated pitting corrosion test of 304 stainless steel using ASTM G48: experimental investigation and concomitant challenges [J].Journal of Loss Prevention in the Process Industries,2017(47):10-21.
[15]	向勇,黄玲,曾麟芳,等. 耐腐蚀不锈钢覆层钢筋的开发和应用前景[C]//第十一届中国钢铁年会论文集.北京:2017:141-146.
[16]	HUA J M, WANG F, HUANG L P, et al. Experimental study on mechanical properties of corroded stainless-clad bimetallic steel bars [J/OL]. Construction and Building Materials, 2021, 287[2022-11-20].https://doi.org/10.1016/j.conbuildmat.2021.123019.
[17]	HUA J M, WANG F, XIANG Y, et al. Mechanical properties of stainless-clad bimetallic steel bars exposed to elevated temperatures [J/OL]. Fire Safety Journal, 2022. 127[2022-11-20].https://doi.org/10.1016/j.firesaf.2021.103521.
[18]	华建民, 王斐, 薛暄译,等. 高温后不锈钢-碳钢复合钢筋低周疲劳性能[J]. 哈尔滨工业大学学报, 2022, 54(4):150-160.
[19]	YUAN Y S, JI Y. Modeling corroded section configuration of steel bar in concrete structure [J].Construction and Building Materials, 2009,23(6):2461-2466.
[20]	中华人民共和国住房和城乡建设部.普通混凝土长期性能和耐久性能试验方法标准:GB/T 50082—2009[S]. 北京:中国建筑工业出版社,2009.
[21]	中华人民共和国国家质量监督检验检疫总局.金属材料拉伸试验第1部分:室温试验方法: GB/T 228.1—2010[S].北京:中国标准出版社,2010.
[22]	中华人民共和国国家质量监督检验检疫总局.钢筋混凝土用钢第2部分:热轧带肋钢筋: GB/T 1499.2—2018[S].北京: 中国标准出版社,2018.
[23]	TANG F J, LIN Z B, et al.Three-dimensional corrosion pit measurement and statistical mechanical degradation analysis of deformed steel bars subjected to accelerated corrosion [J].Construction and Building Materials, 2014,70:104-117.

Relative Articles

[1]	XUE Weichen, ZHANG Baozheng, CHEN Shengyang, JIANG Jiafei, GUO Dapeng. State of the Art on Mechanical Properties of Precast Prestressed Concrete Structures (for Buildings and Utility Tunnels)[J]. INDUSTRIAL CONSTRUCTION, 2024, 54(10): 9-20. doi: 10.3724/j.gyjzG24100801
[2]	ZHOU Ziqian, GAO Wen, HE Qiushi, LIN Borong, HAN Yuqiao. Artificial Intelligence Exploration in Architectural Design-From Generative Design to Intelligent Decision-Making[J]. INDUSTRIAL CONSTRUCTION, 2022, 52(7): 159-172,47. doi: 10.13204/j.gyjzG21090801
[3]	PENG Lingyun, LIU Wen, SUN Rui. The Dynamic Model of Distribution Parameters for a Frame Structure by Base Isolation and the Regularity of Earthquake Responses[J]. INDUSTRIAL CONSTRUCTION, 2022, 52(2): 52-58,168. doi: 10.13204/j.gyjzG21031704
[4]	YU Wen-zheng, SUN Bo-feng, YING Wei, DONG Ting-shun. Research on Seismic Isolation and Seismic Reduction of High-Rise Buildings Bases in High Intensity Area[J]. INDUSTRIAL CONSTRUCTION, 2022, 52(9): 94-100,107. doi: 10.13204/j.gyjzg21052302
[5]	CHENG Bei, GENG Pan, LEI Yuande. PERFORMANCE RESEARCH ON LATERAL STIFFNESS OF THE BASE-ISOLATION SHEAR WALL STRUCTURE CONSIDERING VERTICAL DEFORMATION OF ISOLATION BEARING[J]. INDUSTRIAL CONSTRUCTION, 2020, 50(4): 24-29. doi: 10.13204/j.gyjz202004005
[6]	Li Jie, Du Rong. BUILDING DESIGN OF BOZHOU GRAND THEATRE AND RADIO ＆ TELEVISION CENTER[J]. INDUSTRIAL CONSTRUCTION, 2015, 45(4): 177-180. doi: 10.13204/j.gyjz201504034
[7]	He Zhijian, Wang Sheliang. THE INFLUENCE OF ISOLATION LAYER STIFFNESS ON THE SEISMIC RESPONSE OF THE FRICTIONAL SLIDING STRUCTURE[J]. INDUSTRIAL CONSTRUCTION, 2013, 43(11): 59-63,48. doi: 10.13204/j.gyjz201311014
[8]	Du Yongfeng, Wu Zhongtie, Fan Pingping. ANALYSIS OF STRESS AND DEFORMATION OF LAMINATED RUBBER BEARING CONNECTED WITH THE RC COLUMNS UNDER EARTHQUAKE[J]. INDUSTRIAL CONSTRUCTION, 2012, 42(3): 39-42,132. doi: 10.13204/j.gyjz201203007
[9]	Li Minhao, Lu Keren. STRUCTURE APPLICATION IN ARCHITECTURAL DESIGN[J]. INDUSTRIAL CONSTRUCTION, 2011, 41(9): 49-52,66. doi: 10.13204/j.gyjz201109010
[10]	Zhang Yan, Li Zhangzheng. NON-LINEAR TIME-HISTORY ANALYSIS OF HIGH-LEVEL ISOLATION STRUCTURE UNDER MULTI-DIMENSIONAL SEIM[J]. INDUSTRIAL CONSTRUCTION, 2011, 41(4): 16-20. doi: 10.13204/j.gyjz201104004
[11]	Tan Jing, Qiu Linbo, Zhang Yumin, Su Youpo, Su Jingyu. THE PROPERTY EXPERIMENTAL STUDY OF THE LATERAL AND VERTICAL COMPOUND SEISMIC ISOLATION SYSTEM[J]. INDUSTRIAL CONSTRUCTION, 2008, 38(3): 64-67. doi: 10.13204/j.gyjz200803018
[12]	Sun Lianhong, Ma Zhibin, Hao Shengqi. THE LINKS DRAWN ATTENTION DURING DESIGN OF THE FOUNDATION FOR A MILL BUILDING[J]. INDUSTRIAL CONSTRUCTION, 2008, 38(9): 4-6. doi: 10.13204/j.gyjz200809002
[13]	Wu Bilong, Li Ying. CONSIDERATION ON DESIGN OF ENERGY CONSERVATION IN BUILDING BASED ON EXPERIENCE FROM GERMANY[J]. INDUSTRIAL CONSTRUCTION, 2006, 36(9): 104-105.
[14]	Yang Lin, Zhou Xiyuan, Su Youpo, Chang Yongping. SEISMIC RESPONSE ANALYSIS OF ISOLATED PROTECTION DEVICE WITH VARIABLE- STIFFNESS FOR BASE- ISOLATED BUILDINGS[J]. INDUSTRIAL CONSTRUCTION, 2006, 36(9): 24-29.
[15]	Luo Zhihua, Li Xi. APPLICATION ANALYSIS OF CYBERNATED DRAFT TECHNOLOGY IN ARCHITECTURE DESIGN[J]. INDUSTRIAL CONSTRUCTION, 2005, 35(9): 32-34. doi: 10.13204/j.gyjz200509009
[16]	Liu Dehua, Dong Xiaolong. DEVELOPMENT TREND OF DESIGN OF THE BUILDING FOR A CIGARETTE FACTORY[J]. INDUSTRIAL CONSTRUCTION, 2005, 35(3): 8-10. doi: 10.13204/j.gyjz200503004
[17]	Xian Qiaoling, Yi Weijian, Ding Hongtao. THE INFLUENCE FACTORS ON THE STRENGTH AND DUCTILITY OF THE REINFORCED CONCRETE COLUMNS EXTERNALLY BONDED WITH CFRP[J]. INDUSTRIAL CONSTRUCTION, 2005, 35(5): 101-104. doi: 10.13204/j.gyjz200505027
[18]	Bao Hua, Xu Lihua, Xu Shuping, Zhou You. INFLUENCE OF SOIL-STRUCTURE DYNAMIC INTERACTION ON SEISMIC RESPONSES OF BASE-ISOLATION[J]. INDUSTRIAL CONSTRUCTION, 2005, 35(8): 75-81. doi: 10.13204/j.gyjz200508019
[19]	Di Peng, Fang Zhiyong. DISCUSSION ON BUILDING DESIGN FOR HUGE AND MEDIUM COMPUTER ROOMS[J]. INDUSTRIAL CONSTRUCTION, 2004, 34(10): 94-96. doi: 10.13204/j.gyjz200410028
[20]	Chen Huaming, Liu Weiqing, Sun Xuemei. SHOCK ISOLATION DESIGN OF FOUNDATION FOR A BRICK MASONRY RESIDENCE BUILDING[J]. INDUSTRIAL CONSTRUCTION, 2004, 34(11): 94-96. doi: 10.13204/j.gyjz200411026