Citation: | WANG Shanzhang, ZHANG Bing, ZHANG Qianbiao, ZHENG Huanze, GAO Yuhang. Experimental Research on Seismic Properties of Rectangular FRP-Concrete-Steel Double-Skin Tubular Columns Under Quasi-Static Load[J]. INDUSTRIAL CONSTRUCTION, 2022, 52(12): 136-141,178. doi: 10.13204/j.gyjzG22031713 |
[1] |
滕锦光. 新材料组合结构[J]. 土木工程学报, 2018, 51(12):1-11.
|
[2] |
叶列平, 冯鹏. FRP在工程结构中的应用与发展[J]. 土木工程学报, 2006, 39(3):24-36.
|
[3] |
吴智深, 汪昕, 吴刚. 面向重大工程应用FRP若干核心研究问题[C]//第七届全国建设工程FRP应用学术交流会论文集. 杭州:2011.
|
[4] |
滕锦光, 余涛, 黄玉龙, 等. FRP管-混凝土-钢管组合柱力学性能的试验研究和理论分析[J]. 建筑钢结构进展, 2006, 8(5):1-7.
|
[5] |
TENG J G, YU T, WONG Y L, et al. Hybrid FRP-concrete-steel tubular columns:concept and behavior[J]. Construction and Building Materials, 2007, 21(4):846-854.
|
[6] |
ZHOU Y W, LIU X M, XING F, et al. Behavior and modeling of FRP-concrete-steel double-skin tubular columns made of full lightweight aggregate concrete[J]. Construction and Building Materials, 2017, 139:52-63.
|
[7] |
ZHANG B, TENG J G, YU T. Compressive behavior of double-skin tubular columns with high-strength concrete and a filament-wound FRP tube[J]. Journal of Composites for Construction-ASCE, 2017.DOI: 10.1061/(ASCE)CC.1943-5614.0000800.
|
[8] |
ZHANG B, YU T, TENG J G. Behavior and modelling of FRP-concrete-steel hybrid double-skin tubular columns under repeated unloading/reloading cycles[J]. Composite Structures, 2021, 258. https://doi.org/10.1016/j.compstruct.2020.113393.
|
[9] |
YU T, WONG Y L, TENG J G. Behavior of hybrid FRP-concrete-steel double-skin tubular columns subjected to eccentric compression[J]. Advances in Structural Engineering, 2010, 13(5):961-974.
|
[10] |
钱稼茹, 刘明学. FRP-混凝土-钢双壁空心管长柱轴心受压试验[J]. 混凝土, 2006(9):31-34.
|
[11] |
许平, 姚谏, 卢哲刚. 纤维增强复合材料管-混凝土-钢管组合长柱偏心受压试验研究[J]. 工业建筑, 2014, 44(1):134-137.
|
[12] |
HAN L H, TAO Z, LIAO F Y, et al. Tests on cyclic performance of FRP-concrete-steel double-skin tubular columns[J]. Thin-Walled Structures, 2010, 48(6):430-493.
|
[13] |
ZHANG B, TENG J G, YU T. Experimental behavior of hybrid FRP-concrete-steel double-skin tubular columns under combined axial compression and cyclic lateral loading[J]. Engineering Structures, 2015, 99:214-231.
|
[14] |
ZHANG B, YU T, TENG J G, et al. Numerical simulation of hysteretic behavior of hybrid FRP-concrete-steel double-skin tubular columns[C]//Proceedings, The 12th International Symposium on Fiber Reinforced Polymers for Reinforced Concrete Structures (FRPRCS-12) & The 5th Asia-Pacific Conference on Fiber Reinforced Polymers in Structures (APFIS-2015) Joint Conference. Nanjing:2015.
|
[15] |
WANG R, HAN L H, TAO Z. Behavior of FRP-concrete-steel double skin tubular members under lateral impact Experimental study[J]. Thin-Walled Structures, 2015, 95:363-373.
|
[16] |
刘烨, 王蕊, 李志刚. CFRP-混凝土-钢管组合结构在低速侧向撞击下的动力响应[J]. 爆炸与冲击, 2018, 38(4):759-767.
|
[17] |
JIANG S, FERNADO D, TENG J G. Experimental behaviour of hybrid FRP-concrete-steel double-skin tubular arches[C]//Proceedings of the 8th International Conference on Fibre-Reinforced Polymer (FRP) Composites in Civil Engineering. Hong Kong:2016.
|
[18] |
CHEN G M. Use of FRP-concrete-steel hybrid tubular members in bridges:first practical implementations in the world[C]//Fifth International Workshop on Seawater Sea-sand Concrete (SSC) Structures Reinforced with FRP Composites. Hong Kong:2021.
|
[19] |
YU T, WONG Y L, TENG J G, et al. Flexural behaviour of hybrid FRP-concrete-steel double-skin tubular members[J]. Journal of Composites for Construction, ASCE, 2006, 10(5):443-452.
|
[20] |
ZHAO J L, TENG J G, YU T. Behavior of large-scale hybrid FRP-concrete-steel double-skin tubular beams with shear connectors[J]. Journal of Composite of Construction-ASCE, 2016, 20(5).DOI: 10.1061/(ASCE)CC.1943-5614.0000669.
|
[21] |
中华人民共和国住房和城乡建设部. 纤维增强复合材料建设工程应用技术规范:GB 50608-2020[S]. 北京:中国计划出版社, 2020.
|
[22] |
ASTM. Standard test method for tensile properties of polymer matrix composite materials:ASTM D3039/D3039M-00[S]. Philadelphia, USA:American Society for Testing and Materials (ASTM), 2000.
|
[23] |
ASTM. Standard test method for compressive strength of cylindrical concrete specimens:ASTM C39/C39M-11a[S]. Philadelphia, USA:American Society for Testing for Testing and Materials (ASTM), 2011.
|
[24] |
中国国家标准化管理委员会. 金属材料拉伸试验第1部分:室温试验方法:GB/T 228.1-2010[S]. 北京:中国国家标准化管理委员会, 2010.
|
[25] |
ZHANG B, HU X M, WEI W, et al. Effect of cross-sectional aspect ratio on rectangular FRP-concrete-steel double-skin tubular columns under axial compression[J]. Advances in Polymer Technology, 2020. DOI.org/10.1155/2020/1349034.
|