Experimental Research on Threshold Values of Deformation Failure of Rock Discontinuities with Different Roughness Under Cyclic Loading and Unloading

ZHENG Wei; WANG Zhen; GU Linlin; LI Hujun; MA Junnan

doi:10.13204/j.gyjzG21120802

Volume 53 Issue 2

Feb. 2023

Turn off MathJax

Article Contents

Abstract

References

Article Navigation > INDUSTRIAL CONSTRUCTION > 2023 > 53(2): 163-168

ZHENG Wei, WANG Zhen, GU Linlin, LI Hujun, MA Junnan. Experimental Research on Threshold Values of Deformation Failure of Rock Discontinuities with Different Roughness Under Cyclic Loading and Unloading[J]. INDUSTRIAL CONSTRUCTION, 2023, 53(2): 163-168. doi: 10.13204/j.gyjzG21120802

Citation:

ZHENG Wei, WANG Zhen, GU Linlin, LI Hujun, MA Junnan. Experimental Research on Threshold Values of Deformation Failure of Rock Discontinuities with Different Roughness Under Cyclic Loading and Unloading[J]. INDUSTRIAL CONSTRUCTION, 2023, 53(2): 163-168. doi: 10.13204/j.gyjzG21120802

Citation:

ZHENG Wei, WANG Zhen, GU Linlin, LI Hujun, MA Junnan. Experimental Research on Threshold Values of Deformation Failure of Rock Discontinuities with Different Roughness Under Cyclic Loading and Unloading[J]. INDUSTRIAL CONSTRUCTION, 2023, 53(2): 163-168. doi: 10.13204/j.gyjzG21120802

PDF( 1139 KB)

Experimental Research on Threshold Values of Deformation Failure of Rock Discontinuities with Different Roughness Under Cyclic Loading and Unloading

doi: 10.13204/j.gyjzG21120802

1. Department of Civil Engineering, Nanjing University of Science and Technology, Nanjing 210094, China;
2. School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing 210094, China;
3. Department of Civil Engineering, Nagoya Institute of Technology, Nagoya 466-8555, Japan

Received Date: 2021-12-08
Available Online: 2023-05-25
Publish Date: 2023-02-20

Abstract

Abstract

The threshold value of rock is an important parameter to predict whether deformation failure occurs. To study the changing law of threshold value and its influence on rock deformation characteristics, using the CSS-1950 biaxially rheological testing machine for rock to conduct the cyclic loading and unloading test for cement mortar blocks with different roughness of Barton curve discontinuities, by analyzing the deformation characteristics of different rock discontinuities specimens under various normal stresses, the solution method of threshold value was summarized. Based on the calculation results of threshold values, the relation between the threshold value, the joint roughness coefficient (JRC) and the normal stress was analyzed. The effects of the JRC and the normal stress on the deformation characteristics of rock discontinuities were discussed. Research showed that with the increase of the shear load level, the displacement of the rock discontinuity subjected to cyclic loading first grew in a linear trend, and then grew in a nonlinear development state. The horizontal stress values corresponding to the two turning points were the threshold values of the rock discontinuity. With the increase of the JRC or normal stress, the threshold values of the rock discontinuity increased, however the threshold value ratio decreased.
- rock discontinuity,
- roughness,
- cyclic shear loading,
- deformation characteristics,
- threshold value

FullText(HTML)

References(20)

References

[1]	沈明荣,陈建峰. 岩体力学[M]. 上海:同济大学出版社,1998.
[2]	KEEPER D K. Landslides caused by earthquakes[J]. Geological Society of America Bulletin,1984,95(4):406-421.
[3]	NISHIMURA T. Earthquake-induced landslides[M]. Berlin Heidelberg:Springer, 2013.
[4]	KILBURN C, PETLEY D N. Forecasting giant, catastrophic slope collapse:lessons from Vajont, Northern Italy[J]. Geomorphology, 2003, 54(1/2):21-32.
[5]	OPPIKOFER T, JABOYEDOFF M, BLIKRA L, et al. Characterization and monitoring of the Åknes rockslide using terrestrial laser scanning[J]. Natural Hazards and Earth System Sciences,2009, 9:1003-1019.
[6]	ARAKI E, SAFFER D M, KOPF A J, et al. Recurring and triggered slow-slip events near the trench at the Nankai Trough subduction megathrust[J]. Science, 2017,356(6343):1157-1160.
[7]	葛修润.周期荷载下岩石大型三轴试件的变形和强度特性研究[J].岩土力学,1987,28(2):11-19.
[8]	葛修润,卢应发.循环荷载作用下岩石疲劳破坏和不可逆变形问题的探讨[J]. 岩土工程学报, 1992,16(3):56-60.
[9]	葛修润,蒋宇,卢允德,等, 周期荷载作用下岩石疲劳变形特性试验研究[J]. 岩石力学与工程学报,2003,22(10):1581-1585.
[10]	章清叙,葛修润,黄铭,等. 周期荷载作用下红砂岩三轴疲劳并行特性试验研究[J].岩石力学与工程学报,2006,25(3):473-478.
[11]	谢和平,彭瑞东,鞠杨.岩石变形破坏过程中的能量耗散分析[J].岩石力学与工程学报,2004,23(21):3565-3570.
[12]	赵忠虎,谢和平. 岩石变形破坏过程中的能量传递和耗散研究[J]. 四川大学学报(工程科学版),2008(2):26-31.
[13]	赵闯,武科,李术才,等. 循环荷载作用下岩石损伤变形与能量特征分析[J].岩土工程学报,2013,37(5):890-896.
[14]	LI N, CHEN W, ZHANG P, et al. The mechanical properties and a fatigue-damage model for jointed rock masses subjected to dynamic cyclical loading[J]. International Journal of Rock Mechanics & Mining Sciences, 2001, 38(7):1071-1079.
[15]	LI N, ZHANG P, CHEN Y S, et al. Fatigue properties of cracked, saturated and frozen sandstone samples under cyclic loading[J]. International Journal of Rock Mechanics & Mining Sciences, 2003, 40(1):145-150.
[16]	JAFARI M K, HOSSEINI K A, PELLET F, et al. Evaluation of shear strength of rock joints subjected to cyclic loading[J]. Soil Dynamics & Earthquake Engineering, 2003, 23(7):619-630.
[17]	JAFARI M K, PELLET F, BOULON M, et al. Experimental study of mechanical behaviour of rock joints under cyclic loading[J]. Rock Mechanics and Rock Engineering, 2004, 37(1):3-23.
[18]	刘博,李海波,刘亚群.循环剪切荷载作用下岩石节理变形特性试验研究[J].岩土力学,2013,34(9):2475-2481 ,2488.
[19]	张雨霆,丁秀丽,邬爱清,等.有厚度天然结构面法向循环加载变形特性研究[J].岩土力学,2017,38(10):2865-2872.
[20]	王振,沈明荣,田光辉,等.不同粗糙度结构面时效强度特征[J].岩石力学与工程学报,2017,36(增刊1):3287-3296.

Relative Articles

[1]	HANG Zhenyuan, YU Ying. Experimental Research on Fracture Properties of Mixed Mode Ⅰ-Ⅱ Concrete-Epoxy Mortar Interface[J]. INDUSTRIAL CONSTRUCTION, 2023, 53(2): 29-36. doi: 10.13204/j.gyjzG22113007
[2]	JIANG Guoyong, HUANG Xuanming, ZHANG Xinjiang, WANG Jingxian, ZHANG Ning. Experimental Research on Compression-Shear Bearing Capacity of Concrete Exposed Aggregate Treated Bond Surfaces[J]. INDUSTRIAL CONSTRUCTION, 2023, 53(4): 148-153,61. doi: 10.13204/j.gyjzG22082207
[3]	CUI Zhimeng, DENG Zhiying, ZHANG Bingwu, YU Hao, LI Long. Shear Properties of Anisotropic Structural Surfaces with Similar Strength[J]. INDUSTRIAL CONSTRUCTION, 2022, 52(6): 133-139. doi: 10.13204/j.gyjzG21052304
[4]	CHEN Hang-jie, HE Fei, WANG Xu, CHEN Ming-wei. Research on Influence of Roughness on Shear Characteristics of Interfaces Between Frozen Soil and Structures[J]. INDUSTRIAL CONSTRUCTION, 2022, 52(9): 186-192,213. doi: 10.13204/j.gyjzG22012005
[5]	DAI Zeyu, MAO Xuesong, NIE Menglan, LIU Longqi. STUDY ON MESOSTRUCTURAL CHARACTERISTICS OF SHEAR SURFACES FOR ALLUVIAL-DILUVIAL SUBGRADE FILLERS BASED ON THE N-METHOD[J]. INDUSTRIAL CONSTRUCTION, 2021, 51(6): 143-149,122. doi: 10.13204/j.gyjzG20071704
[6]	WANG Mingming, XIN Zhiyong, OU Tong, WANG Dayang, ZHANG Yongshan, ZHU Yong. EXPERIMERTAL RESEARCH ON TEMPERATURE FIELD EFFECT OF STANDING SEAM ALUMINUM ALLOY ROOF SYSTEMS[J]. INDUSTRIAL CONSTRUCTION, 2021, 51(8): 126-136. doi: 10.13204/j.gyjzG20091602
[7]	ZHAO Zeyu, GAO Anrong, LANG Ruiqing, SUN Liqiang, FENG Shouzhong, SONG Yang, HUANG Yongjie. DEFORMATION CHARACTERISTICS AND MODULUS CALCULATION METHOD OF RING-REINFORCED LIME-SOIL PIERS[J]. INDUSTRIAL CONSTRUCTION, 2021, 51(8): 166-172. doi: 10.13204/j.gyjzG20111903
[8]	ZHU Ruijuan, GU Linlin. SHEAR-SEEPAGE-COUPLING CHARACTERISTICS OF ROCK DISCONTINUITY IN SERRATED INTERFACES[J]. INDUSTRIAL CONSTRUCTION, 2020, 50(10): 101-105. doi: 10.13204/j.gyjzG19121607
[15]	Xia Hongchun. CONSTITUTIVE MODEL OF SOIL-STRUCTUＲE INTERFACE BASED ON STRAIN GRADIENT PLASTICITY THEORY[J]. INDUSTRIAL CONSTRUCTION, 2015, 45(6): 87-92. doi: 10.13204/j.gyjz201506018
[16]	Huang Qunxian, Guo Zixiong, Liu Yang. EXPERIMENTAL STUDY ON SEISMIC BEHAVIORS OF SRC COLUMN-RC BEAM HYBRID JOINTS[J]. INDUSTRIAL CONSTRUCTION, 2010, 40(9): 48-52. doi: 10.13204/j.gyjz201009014
[17]	Hu Changming, Ge Zhaoshen, Wang Lifang, Shen Qin. A STUDY ON DEFORMATION CHARACTERISTIC OF COUPLER STEEL TUBE FALSEWORK[J]. INDUSTRIAL CONSTRUCTION, 2010, 40(2): 32-35. doi: 10.13204/j.gyjz201002008