Stduy on Mechanical Properties of Steel Frame Structures with Rotational Friction Damper

ZHAO Zhiyuan; WANG Yan; ZHANG Haibin

doi:10.13204/j.gyjzG21072206

Volume 53 Issue 6

Jun. 2023

Turn off MathJax

Article Contents

Abstract

References

Article Navigation > INDUSTRIAL CONSTRUCTION > 2023 > 53(6): 138-147

CHEN Yang, NING Jian, REN Chong, YANG Yong. Numerical Study on Shear Performance of Grouped Large Headed Stud Connectors in Prefabricated Steel-Thin UHPC Composite Girder[J]. INDUSTRIAL CONSTRUCTION, 2023, 53(12): 164-174. doi: 10.13204/j.gyjzG23070905

Citation:

ZHAO Zhiyuan, WANG Yan, ZHANG Haibin. Stduy on Mechanical Properties of Steel Frame Structures with Rotational Friction Damper[J]. INDUSTRIAL CONSTRUCTION, 2023, 53(6): 138-147. doi: 10.13204/j.gyjzG21072206

Citation:

PDF( 12883 KB)

Stduy on Mechanical Properties of Steel Frame Structures with Rotational Friction Damper

doi: 10.13204/j.gyjzG21072206

1. School of Civil Engineering, Qingdao University of Technology, Qingdao 266033, China;
2. Shandong Hi-Speed Laigang Green Construction Development Co., Ltd., Qingdao 266000, China

Received Date: 2021-07-22
Available Online: 2023-08-18

Abstract

Abstract

In order to study the seismic performance of steel frame with rotational friction damper parameters, the finite element calculation model of rotational friction damper was established by using ABAQUS. The seismic mechanism of the structure was analyzed, and the restoring force model of steel frame with rotational friction damper was proposed. The stress distribution and failure mode of steel frame structures with rotational friction damper under monotonic and quasi-static load were studied, as well as the influence of high-strength bolt preload and friction coefficient of friction plate on the seismic performance of the structure. The results showed that the initial stiffness and bearing capacity of the steel frame with rotational friction damper were significantly improved compared with the ordinary steel frame. When the damper reached the maximum rotational range, it worked with the structure and provided a certain stiffness; by increasing the preload of high-strength bolts and friction coefficient of friction plate, the initial stiffness of the structure could be improved, but there was no obvious effect on the ultimate load and sliding stiffness of the structure; the hysteretic curve of the steel frame model with rotational friction damper was full and had good ductility and energy dissipation capacity.
- rotational friction damper,
- steel frame,
- finite element analysis,
- seismic performance

FullText(HTML)

References(15)

References

[1]	MUALLA I H. Experimental evaluation of new friction damper device[C]//12th World Conference on Earthquake Engineering. Auckland, New Zealand: 2000.
[2]	隋伟宁,周魁,王占飞.转动型摩擦阻尼器力学性能及抗震效果分析[J].工业建筑, 2018,48(4):137-143.
[3]	杨小琦,王燕,张海宾,等.基于转动型摩擦阻尼器滞回性能试验研究[J].工业建筑,2020,50(5):151-157.
[4]	JARRAHI H,ASADI A,KHATIBINIA M,et al.Simultaneous optimization of placement and parameters of rotational friction dampers for seismic-excited steel moment-resisting frames[J/OL].Soil Dynamics and Earthquake Engineering, 2020,136(2021-07-20). https://www.researchgate.net/publication/342009328.
[5]	NAEEM A, KIM J. Seismic retrofit of structures using rotational friction dampers with restoring force[J].Advances in Structural Engineering,2020,23(16): 3525-3540.
[6]	马立威.转动型摩擦阻尼器力学性能的试验研究及理论分析[D].青岛:青岛理工大学,2019.
[7]	杨小琦.转动型摩擦阻尼器滞回性能试验研究及有限元分析[D].青岛:青岛理工大学,2019.
[8]	ANOUSHEHEI M, DANESHJOO F, MAHBOUBI S,et al.Empirical evaluation of cyclic behavior of rotational friction dampers with different metal pads[J].ScientiaIranica A, 2018, 25(6): 3021-3029.
[9]	王燕.钢结构新型延性节点的抗震设计理论及其应用[M].北京:科学出版社,2012.
[10]	董建莉.新型延性节点钢框架抗震性能研究[D].青岛:青岛理工大学,2016.
[11]	段留省,苏明周.高强钢组合K形偏心支撑钢框架抗震性能分析[J].西安建筑科技大学学报(自然科学版),2015(1): 46-50.
[12]	张爱林,朱莉娜,张艳霞,等.中间柱型阻尼器全螺栓装配式钢框架数值分析[J].钢结构(中英文),2019,34(12): 46-51.
[13]	王纪斌.空间钢框架在循环荷载作用下的受力性能研究[D].西安:西安科技大学,2008.
[14]	中华人民共和国住房和城乡建设部.建筑抗震试验规程:JGJ/T 101—2015[S].北京:中国建筑工业出版社,2015.
[15]	冯鹏,强翰霖,叶列平.材料、构件、结构的"屈服点"定义与讨论[J].工程力学,2017,34(3):36-46.

Relative Articles

[1]	LIN Wenluo, LI Junhua, TAN Jie. Experimental Research on Shear Performance of Stainless Steel Connectors in a New Type of Prefabricated Concrete Sandwich Insulation Wall Panels[J]. INDUSTRIAL CONSTRUCTION, 2024, 54(4): 64-71. doi: 10.13204/j.gyjzG23050606
[2]	YANG Hui, WU Junlin, LIU Zhang, CHEN Zheheng, WANG Zheyu. Experimental Research on Shear Performance of Joint Interface in Prefabricated Viaducts[J]. INDUSTRIAL CONSTRUCTION, 2024, 54(4): 72-80. doi: 10.3724/j.gyjzG23051909
[3]	ZHAO Yongqiang, ZHENG Zhiyuan, ZHANG Pengyuan, ZHANG Yujin, XU Qi, XU Yiming. Experimental Research on Seismic Performance of Prefabricated Concrete Shear Walls with Prefabricated Concrete Infill Walls[J]. INDUSTRIAL CONSTRUCTION, 2023, 53(1): 108-120. doi: 10.13204/j.gyjzG22022114
[4]	WU Junlin, YANG Hui, GUO Zhengxing. Numerical Analysis of Seismic Performance of Local Post-Tensioned Prestressed Assembled Concrete Frame Beam-Column Joints[J]. INDUSTRIAL CONSTRUCTION, 2023, 53(3): 29-34,28. doi: 10.13204/j.gyjzG22081301
[5]	WANG Yuhang, WANG Jingshen, TAN Jike, SHUAI Fuwen, REN Wei. Research on Shear Bearing Performance of Vertical Grouting Joints of Steel-Concrete Tower Barrel[J]. INDUSTRIAL CONSTRUCTION, 2023, 53(8): 107-117. doi: 10.13204/j.gyjzG23030119
[6]	ZHANG Chenrong, YAN Jingliang, LIU Xiaogang. Research on Tensile and Shear Performance of Fully-Prefabricated Slabs with UHPC Split-Joints[J]. INDUSTRIAL CONSTRUCTION, 2023, 53(9): 119-127. doi: 10.13204/j.gyjzG23022811
[7]	REN Chong, YUAN Yuqing, CHEN Yang. Finite Element Analysis on Shear Performance Large-Diameter Short Stud Connectors in Prefabricated Steel-Thin UHPC Composite Beams[J]. INDUSTRIAL CONSTRUCTION, 2023, 53(11): 180-187. doi: 10.13204/j.gyjzG22112702
[8]	BU Yang, ZHANG Ping. Finite Element Analysis on Seismic Performance of Buckling-Restrained Butterfly-Shaped Steel Plate Wall[J]. INDUSTRIAL CONSTRUCTION, 2022, 52(4): 62-69,208. doi: 10.13204/j.gyjzG20041801
[9]	ZHANG Yueguo, ZHAO Zhigang, YIN Zhan, CHE Xiangdong, ZHU Bin, WANG Zhili, LYU Anan. Research on Shear Resistance of Truss Connector of Precast Concrete Sandwich Insulation Wall[J]. INDUSTRIAL CONSTRUCTION, 2022, 52(1): 74-78,46. doi: 10.13204/j.gyjzG20041303
[10]	XIE Zhiqiang, SHI Leilei, ZHANG Ailin, ZHOU Daxing, ZHANG Xiangdong, YIN Bingshuai, WANG Kai. Research on Simplified Analysis Methods of Nonlinear Finite Element for Shear Performance of Self-Piercing Riveting Connections Between Cold-Formed Steel Sheets[J]. INDUSTRIAL CONSTRUCTION, 2022, 52(5): 98-105,146. doi: 10.13204/j.gyjzG22011912
[11]	WANG Zhanwen, CHEN Jianwei, JU Shilong, LIU Ziye. EXPERIMENTAL STUDY ON EFFECT OF LOADING MODE AND ANCHORAGE LENGTH ON CONNECTION BEHAVIOR OF GROUTING SLEEVE FOR REBARS SPLICING[J]. INDUSTRIAL CONSTRUCTION, 2021, 51(4): 118-125,171. doi: 10.13204/j.gyjzG20032904
[12]	REN Hongwei, QI Fang. EXPERIMENTAL RESEARCH ON SEISMIC PERFORMANCE OF PREFABRICATED SHEAR WALL WITH CONCRETE FILLED STEEL TUBE FRAME UNDER RAPID RECIPROCATING LOAD[J]. INDUSTRIAL CONSTRUCTION, 2021, 51(6): 103-110,116. doi: 10.13204/j.gyjzG20070211
[13]	LI Wentao, JIA Junfeng, WANG Yuguo, LI Bin, WAN Siyi. EXPERIMENTAL RESEARCH ON MECHANICAL PROPERTIES OF NEW AND OLD CONCRETE JOINTS OF PREFABRICATED STRUCTURE[J]. INDUSTRIAL CONSTRUCTION, 2021, 51(2): 40-46. doi: 10.13204/j.gyjzG20032702
[14]	Pang Rui, Xiong Xiaoli, Jiang Lifeng. EXPERIMENTAL STUDY OF SHEAR CAPACITY OF π-SHAPE SLAB JOINTS IN PRECAST RC DIAPHRAGM[J]. INDUSTRIAL CONSTRUCTION, 2014, 44(08): 84-87.
[15]	Pang Rui, Zhao Yi, Liang Shuting, Zhang Shuo. EXPERIMENTAL STUDY OF SHEAR CAPACITY OF HAIRPIN SLAB CONNECTION IN PRECAST RC FLOOR[J]. INDUSTRIAL CONSTRUCTION, 2014, 44(02): 50-54. doi: 10.13204/j.gyjz201402012
[16]	Pang Rui, Liang Shuting, Zhu Xiaojun, Wu Chuanchuan, Meng Yao. EFFECT OF DETAILED FORMATIONS ON THE PLANE SHEAR MECHANICAL PROPERTY OF HAIRPIN CONNECTORS IN PRECAST RC FLOOR SLABS[J]. INDUSTRIAL CONSTRUCTION, 2011, 41(6): 79-83. doi: 10.13204/j.gyjz201106017
[17]	Zou Linbin, Jiang Haibo, Wei Chungen, Yin Wu, Yang Min. FINITE-ELEMENT ANALYSIS OF SHEAR BEHAVIOR OF JOINT STRUCTURE IN SEGMENTAL CONSTRUCTION CONCRETE BOX GIRDER[J]. INDUSTRIAL CONSTRUCTION, 2011, 41(11): 92-95. doi: 10.13204/j.gyjz201111020
[18]	Zhang Jicheng, Shen Zuyan, Zhou Haijun. NONLINEAR FEM ANALYSIS OF SEISMIC BEHAVIOR OF L－SHAPED CONCRETE－FILLED STEEL TUBULAR COLUMN[J]. INDUSTRIAL CONSTRUCTION, 2010, 40(7): 85-90. doi: 10.13204/j.gyjz201007022
[19]	Zhou Zhanxue, Ma Jiansuo, Zhang Hai. NONLINEAR FINITE ELEMENT ANALYSIS OF SEISMIC PERFORMANCE OF BAILIN TEMPLE PAGODA[J]. INDUSTRIAL CONSTRUCTION, 2010, 40(2): 74-76,63. doi: 10.13204/j.gyjz201002017
[20]	Liu Yang, Zhang Qilin. EXPERIMENT AND FEM ANALYSIS ON THE SHEAR BEHAVIORS OF PROFILED METAL SHEETS[J]. INDUSTRIAL CONSTRUCTION, 2007, 37(10): 88-92. doi: 10.13204/j.gyjz200710024