STUDY ON CONSTITUTIVE MODEL OF CORE CONCRETE OF RECYCLED AGGREGATE CONCRETE FILLED STEEL TUBULAR COLUMNS UNDER COMPRESSION

LI Jiaqi; CHEN Zhihua; DU Yansheng; WU Yongchuan; LIU Xueshan

doi:10.13204/j.gyjzG20081506

Volume 51 Issue 5

Sep. 2021

Turn off MathJax

Article Contents

Abstract

References

Article Navigation > INDUSTRIAL CONSTRUCTION > 2021 > 51(5): 108-115,15

ZHAO Bida, GONG Dacheng, LI Ruifeng, YU Chenda, ZHANG Xuefeng, ZHOU Haijing. Experimental Research on Hysteretic Properties of Partially Encased Steel- Concrete Composite Beams[J]. INDUSTRIAL CONSTRUCTION, 2023, 53(1): 144-150,8. doi: 10.13204/j.gyjzG22051025

Citation:

LI Jiaqi, CHEN Zhihua, DU Yansheng, WU Yongchuan, LIU Xueshan. STUDY ON CONSTITUTIVE MODEL OF CORE CONCRETE OF RECYCLED AGGREGATE CONCRETE FILLED STEEL TUBULAR COLUMNS UNDER COMPRESSION[J]. INDUSTRIAL CONSTRUCTION, 2021, 51(5): 108-115,15. doi: 10.13204/j.gyjzG20081506

Citation:

PDF( 8268 KB)

STUDY ON CONSTITUTIVE MODEL OF CORE CONCRETE OF RECYCLED AGGREGATE CONCRETE FILLED STEEL TUBULAR COLUMNS UNDER COMPRESSION

doi: 10.13204/j.gyjzG20081506

1. School of Civil Engineering, Tianjin University, Tianjin 300072, China;
2. Hebei Construction Group Corporation Limited, Baoding 071000, China

Received Date: 2020-08-15
Available Online: 2021-09-16
Publish Date: 2021-09-16

Abstract

Abstract

It is of great significance to introduce manufactured sand and recycled coarse aggregate into concrete-filled steel tubular (CFST) structures to solve the problems of resource shortage and construction waste pollution. However, there are few studies on recycled concrete members with manufactured sand and no research has been made on the constitutive model of recycled concrete with manufactured sand which is suitable for finite element analysis. In this paper, through ABAQUS software modeling, combined with the test data in relevant literature, several commonly used constitutive models of recycled concrete were compared. According to the comparison results of load-displacement curve and ultimate bearing capacity, the optimal constitutive model of recycled concrete was determined; on the basis of the data in the literature, the calculation formula of the constitutive model was modified, and the infuence of manufactured sand was discussed. Finally, a constitutive model for the concrete core of recycled concrete with manufactured sand filled steel tube.
- manufactured sand,
- recycled concrete,
- constitutive model,
- finite element analysis

FullText(HTML)

References(18)

References

[1]	XIAO J Z. Recycled Aggregate Concrete Structures[M]. Berlin:Springer-Verlag, 2018.
[2]	中华人民共和国住房和城乡建设部.再生混凝土结构技术标准:JGJ/T 443-2018[S].北京:中国建筑工业出版社, 2018.
[3]	韩林海. 钢管混凝土结构[M]. 北京:科学出版社, 2004.
[4]	DU Y S, CHEN Z H, WANG Y B, et al. Ultimate Resistance Behavior of Rectangular Concrete-Filled Tubular Beam-Columns Made of High-Strength Steel[J]. Journal of Constructional Steel Research, 2017, 133. DOI: 10.1016/j.jcsr.2017.02.024.
[5]	HUANG Y J, XIAO J Z, ZHANG C. Theoretical Study on Mechanical Behavior of Steel Confined Recycled Aggregate Concrete[J]. Journal of Constructional Steel Research, 2012, 79(9). DOI: 10.1016/j.jcsr.2012.03.020.
[6]	郭佳. 钢管再生混凝土柱承压性能研究[D]. 南宁:广西大学, 2018.
[7]	李振怀. 钢管高强机制砂混凝土短柱轴压性能试验研究[D]. 深圳:深圳大学, 2018.
[8]	杨海峰, 刘成丽, 梁冬瑶, 等. 含石粉机制砂再生混凝土基本力学性能研究[J]. 混凝土, 2019(8):63-67.
[9]	董宏英, 谢翔, 曹万林, 等. 圆钢管再生混凝土柱抗震性能试验[J]. 天津大学学报, 2018, 51(10):1096-1106.
[10]	邱昌龙. 再生混凝土研究及钢管再生混凝土短柱力学性能分析[D]. 成都:西南交通大学, 2009.
[11]	黄翔宇. 矩形钢管再生混凝土短柱轴压性能研究[D]. 大连:大连理工大学, 2017.
[12]	HAN L H, YANG Y F. Compressive and Flexural Behaviour of Recycled Aggregate Concrete Filled Steel Tubes (RACFST) Under Short-Term Loadings[J]. Steel & Composite Structures, 2006, 6(3):257-284.
[13]	杨有福. 钢管再生混凝土构件荷载-变形关系的理论分析[J]. 工业建筑, 2007, 37(12):1-6.
[14]	刘威. 钢管混凝土局部受压时的工作机理研究[D]. 福州:福州大学, 2005.
[15]	张向冈. 钢管再生混凝土构件及其框架的抗震性能研究[D]. 南宁:广西大学, 2014.
[16]	潘奇. 方钢管再生混凝土短柱有限元分析[D]. 石家庄:河北农业大学, 2014.
[17]	施刚, 石永久, 班慧勇. 高强度钢材钢结构[M]. 北京:中国建筑工业出版社, 2014.
[18]	陈志华, 杜颜胜, 周婷. 配螺旋箍筋方钢管混凝土柱力学性能研究[J]. 建筑结构, 2015, 45(20):28-33.

Relative Articles

[1]	LYU Zhilin, JIANG Xu, QIANG Xuhong, SUN Kai, DONG Hao. Feasibility Research on Strengthening Damaged Steel Structure with Self-Stress SMA[J]. INDUSTRIAL CONSTRUCTION, 2022, 52(6): 174-182. doi: 10.13204/j.gyjzG20100301
[2]	YU Haiyang, HU Ju, ZHANG Guiyan, HUANG Yujun, ZHU Guofei, CUI Hongzhi, BAO Xiaohua. Research on Seismic Responses of Underground Structures Considering Influence of Contact Surfaces[J]. INDUSTRIAL CONSTRUCTION, 2022, 52(12): 156-165. doi: 10.13204/j.gyjzG21090402
[3]	ZHOU Zhiguang, CHEN Hao, ZHAO Jinyi. Study on Shaking Table Test of Nuclear Structure Considering SSI Effect and Isolation[J]. INDUSTRIAL CONSTRUCTION, 2022, 52(6): 87-92. doi: 10.13204/j.gyjzG19100102
[4]	YAN Xiaoyu, ZHAO Zhuo, WANG Jin. Research on Near-Fault Seismic Response of Rigid Frame Bridge Based on Shaking Table Test Considering SSI Effect[J]. INDUSTRIAL CONSTRUCTION, 2022, 52(8): 140-146. doi: 10.13204/j.gyjzG21102801
[5]	MENG, Shaoping, CAI, Xiaoning. RESEARCH PROGRESS ON PRESTRESSED SELF-RESETTING CONCRETE FRAME STRUCTURE[J]. INDUSTRIAL CONSTRUCTION, 2020, 50(1): 1-6. doi: 10.13204/j.gyjz202001001
[6]	SHU Xingping, HUANG Muxing, XIANG Mengjie. EXPERIMENTAL RESEARCH ON LATERAL COMPRESSIVE PROPERTIES FOR THE STRUCTURE OF STAINLESS STEEL SANDWICH PANEL[J]. INDUSTRIAL CONSTRUCTION, 2020, 50(2): 17-23. doi: 10.13204/j.gyjz202002003
[7]	Chen Anying, Guo Zhengxing, Wu Lei. EXPERIMENTAL RESEARCH ON STRUCTURAL MECHANICAL PERFORMANCE OF PIN-DISK TYPE STEEL TUBE SUPPORTING FRAME[J]. INDUSTRIAL CONSTRUCTION, 2014, 44(10): 140-145. doi: 10.13204/j.gyjz201410028
[8]	Li Furong, Zhou Qian, Wu Fahong. EXPERIMENTAL STUDY ON PRECAST SELF-DRAINING PILE[J]. INDUSTRIAL CONSTRUCTION, 2013, 43(9): 96-100. doi: 10.13204/j.gyjz201309018
[9]	Wang Bin, Zheng Shansuo, Zhou Xuefeng. EXPERIMENTAL STUDY ON SEISMIC BEHAVIOR OF SRHSHPC BEAMS[J]. INDUSTRIAL CONSTRUCTION, 2012, 42(12): 21-24,40. doi: 10.13204/j.gyjz201212006
[10]	Shi Gang, Ban Huiyong, Shi Yongjiu, Wang Yuanqing. ENGINEERING APPLICATION AND RECENT RESEARCH PROGRESS ON HIGH STRENGTH STEEL STRUCTURES[J]. INDUSTRIAL CONSTRUCTION, 2012, 42(1): 1-7,61. doi: 10.13204/j.gyjz201201001
[11]	Qin Peicheng, Zha Xiaoxiong. THEORY AND EXPERIMENT STUDY ON THE FATIGUE BEHAVIOR OF METAL SANDWICH PANEL[J]. INDUSTRIAL CONSTRUCTION, 2011, 41(3): 42-45. doi: 10.13204/j.gyjz201103007
[12]	Zhang Xuchen, Zha Xiaoxiong. EXPERIMENTAL RESEARCH ON MECHANICAL BEHAVIOR OF NEW GREEN STRUCTURAL INSULATED PANELS[J]. INDUSTRIAL CONSTRUCTION, 2011, 41(3): 1-5,45. doi: 10.13204/j.gyjz201103001
[13]	Zhao Fenghua, Du Jianming. EXPERIMENTAL STUDY ON FLEXURAL BEHAVIOR OF CS SANDWICH PANELS[J]. INDUSTRIAL CONSTRUCTION, 2010, 40(9): 120-124. doi: 10.13204/j.gyjz201009030
[14]	Zeng Bin, LüZhitao, Zhu Yifeng. APPLICATION OF THE MAST FULL HINGED SUSPENSION STRUCTURE IN JILIN SPEED SKATING RINK[J]. INDUSTRIAL CONSTRUCTION, 2009, 39(11): 86-89. doi: 10.13204/j.gyjz200911020
[15]	Liu Hang, Zhu Xiaofeng, Li Chenguang, Liu Chongyan, Zuo Yongzhi, Shi Gang. TEST & ANALYSIS OF IN-PLANE FLEXURAL BEHAVIORS OF STRENGTHENED GLASS RIBS FOR ALL-GLASS CURTAIN WALL[J]. INDUSTRIAL CONSTRUCTION, 2009, 39(11): 113-117. doi: 10.13204/j.gyjz200911026
[16]	Jiang Lixue. EXPERIMENTAL STUDY ON STRUCTURAL BEHAVIOR OF R/C CONTINUOUS BEAMS WITH CAST-IN-SITU SLABS UNDER VERTICAL LOAD[J]. INDUSTRIAL CONSTRUCTION, 2009, 39(11): 62-67. doi: 10.13204/j.gyjz200911015
[17]	Luo Ting, Li Tingting, Hou Wei, Gao Zhiwei, Wang Qingxiang. TEST VALIDATING OF UH MODEL FOR OVER-CONSOLIDATED CLAYS[J]. INDUSTRIAL CONSTRUCTION, 2008, 38(8): 21-24. doi: 10.13204/j.gyjz200808006
[18]	Li Chengyu, Guo Yaojie, Li Meidong. EXPERIMENTAL RESEARCH ON THE JOINT STIFFNESS OF CFT_STEEL BEAM SPACE JOINT WITH OUTER CONCENTRIC ANNULAR_STIFFER[J]. INDUSTRIAL CONSTRUCTION, 2006, 36(9): 81-83,110.
[19]	Bao Hua, Xu Lihua, Xu Shuping, Zhou You. INFLUENCE OF SOIL-STRUCTURE DYNAMIC INTERACTION ON SEISMIC RESPONSES OF BASE-ISOLATION[J]. INDUSTRIAL CONSTRUCTION, 2005, 35(8): 75-81. doi: 10.13204/j.gyjz200508019
[20]	Tang Gan, Ma Jun, Zhao Caiqi, Zhao Huilin. ADVANCED STOCHASTIC IMPERFECTIONS METHOD FOR STABILITY ANALYSIS OF SHEET SPACE STRUCTURE[J]. INDUSTRIAL CONSTRUCTION, 2004, 34(11): 10-13. doi: 10.13204/j.gyjz200411003