Citation: | GUO Zhen, MA Zhangyong, LIU Yan, YANG Boyi, DENG Peng. ANALYSIS OF COMPRESSIVE BEARING CAPACITY OF DAMAGED TUBULAR T-JOINTS REINFORCED BY CFRP SHEETS[J]. INDUSTRIAL CONSTRUCTION, 2020, 50(8): 166-171. doi: 10.13204/j.gyjzG20041404 |
中国工程建设标准化协会. 碳纤维片材加固混凝土结构技术规程:CECS 146:2003[S]. 北京:中国计划出版社,2003.
|
SHULLEY S B, HUANG X, KARBHARI V M, et al. Fundamental Consideration of Design and Durability in Composite Rehabilitation Schemes for Steel Girders with Web Distress[C]//Infrastructure:New Materials and Methods of Repair. ASCE, 1994:1187-1194.
|
DENG J, LEE M M, MOY S S. Stress Analysis of Steel Beams Reinforced with a Bonded CFRP Plate[J]. Composite Structures, 2004, 65(2):205-215.
|
SHAAT A, FAM A. Slender Steel Columns Strengthened Using High-Modulus CFRP Plates for Buckling Control[J]. Journal of Composites for Construction, 2014, 18(1):2-12.
|
AL-SAIDY A H. Structural Behavior of Composite Steel Beams Strengthened Repaired with Carbon Fiber Reinforced Polymer Plates[D]. Iowa:Iowa State University, 2001.
|
杨勇新,岳清瑞,彭福明. 碳纤维布加固钢结构的黏结性能研究[J].土木工程学报,2006(10):1-5,18.
|
陈沿辰. CFRP布加固钢管桁架K形节点静力性能有限元分析[D]. 西安:长安大学,2017.
|
宋生志,魏建军,陈成. 碳纤维布(CFRP)加固T形圆钢管节点的静力性能研究[J]. 建筑钢结构进展,2015(2):57-64.
|
LESANI M, BAHAARI M M, SHOKRIEH M M. Numerical Investigation of FRP-Strengthened Tubular T-Joints Under Axial Compressive Loads[J]. Composite Structures, 2013, 100:71-78.
|
LESANI M, BAHAARI M R, SHOKRIEH M M. Experimental Investigation of FRP-Strengthened Tubular T-Joints Under Axial Compressive Loads[J]. Construction and Building Material, 2014, 53:243-252.
|
LESANI M, BAHAARI M R, SHOKRIEH M M. FRP Wrapping for the Rehabilitation of Circular Hollow Section (CHS) Tubular Steel Connections[J]. Thin-Walled Structure, 2015, 90:216-234.
|
马栋.碳纤维加固圆钢管T型相贯节点受压性能试验研究[D]. 青岛:山东科技大学,2016.
|
中华人民共和国住房和城乡建设部. 钢结构设计标准:GB 50017-2017[S]. 北京:中国建筑工业出版社,2018.
|
BAO Y B, WIERZBICKI T. On Fracture Locus in the Equivalent Strain and Stress Triaxiality Space[J]. International Journal of Mechanical Sciences, 2004, 46(1):81-98.
|
周天华,李文超,管宇. 基于应力三轴度的钢框架循环加载损伤分析[J].工程力学,2014,31(7):146-155.
|