EXPERIMENTAL RESEARCH ON SHEAR BEHAVIOR OF INDUSTRIAL WASTE FIBER REINFORCED CEMENTITIOUS COMPOSITE

LI Yan; WANG Xiaopeng; HE Zhuguo; FANG Quan

doi:10.13204/j.gyjzG19100806

Volume 50 Issue 12

Mar. 2021

Turn off MathJax

Article Contents

Article Navigation > INDUSTRIAL CONSTRUCTION > 2020 > 50(12): 88-92,159

LI Yan, WANG Xiaopeng, HE Zhuguo, FANG Quan. EXPERIMENTAL RESEARCH ON SHEAR BEHAVIOR OF INDUSTRIAL WASTE FIBER REINFORCED CEMENTITIOUS COMPOSITE[J]. INDUSTRIAL CONSTRUCTION, 2020, 50(12): 88-92,159. doi: 10.13204/j.gyjzG19100806

Citation:

LI Yan, WANG Xiaopeng, HE Zhuguo, FANG Quan. EXPERIMENTAL RESEARCH ON SHEAR BEHAVIOR OF INDUSTRIAL WASTE FIBER REINFORCED CEMENTITIOUS COMPOSITE[J]. INDUSTRIAL CONSTRUCTION, 2020, 50(12): 88-92,159. doi: 10.13204/j.gyjzG19100806

Citation:

PDF( 6309 KB)

EXPERIMENTAL RESEARCH ON SHEAR BEHAVIOR OF INDUSTRIAL WASTE FIBER REINFORCED CEMENTITIOUS COMPOSITE

doi: 10.13204/j.gyjzG19100806

School of Civil Engineering, Jilin Jianzhu University, Changchun 130118, China

Received Date: 2019-10-08
Available Online: 2021-03-31

Abstract

Abstract

The waste fiber extracted from the scrap tire was used as the additional material in the concrete. The shear test of 76 pieces of 150 mm×150 mm×300 mm industrial waste fiber reinforced cement matrix composite under shear load was designed to study the effects of aspect ratio, fiber content and fiber type on the shear strength of fiber reinforced cementitious composites. The results showed that the shear capacity of fiber reinforced cementitions composited increased remarkably with the increase of fiber volume of industrial waste fiber reinforced cementitions composites, and the best effect was achieved at 1.5% volume. The shear strength of straight industrial waste fiber reinforced cementitions composites increased with the increase of aspect ratio. At the same time, the finite element analysis software ABAQUS was used for numerical simulation, and the calculated results were consistent with the test results.
- fiber reinforced cementitions composite,
- shear strength,
- aspect ratio,
- fiber content,
- finite element analysis

FullText(HTML)

References(19)

References

沈荣熹, 崔琪, 李清海. 新型纤维增强水泥基复合材料[M]. 北京:中国建材工业出版社,2004

朱江,赵国藩,李士恩,等.钢纤维增强钢丝网混凝土T形梁的抗弯试验研究[J].华南理工大学学报(自然科学版),2008(1):117-121,127.

刘曙光,黄承逵,王清湘,等.钢纤维改善高强混凝土单轴受压特性的试验研究[J].工业建筑,2005,35(11):78-80.

赵国藩, 彭少民, 黄承逵,等.钢纤维混凝土结构[M]. 北京:中国建筑工业出版社,1999.

尤志国,付秀艳,周云龙,等. 钢纤维混凝土抗弯性能及断面处纤维分布规律研究[J]. 工业建筑,2017,47(2):123-127.

陈庚,李妍,林朝东. 工业回收钢纤维混凝土抗折性能试验研究[C]//全国结构工程学术会议论文集.2018.

于洪斌,李妍.工业回收钢纤维加固混凝土柱轴心受压试验研究[J].吉林建筑大学学报,2019,36(3):1-6.

SHARMA V K, FORTUNA F, MINCARINI M, et al. Disposal of Waste Tyres for Energy Recovery and Safe Environment[J]. Applied Energy,2000,65(1).

徐魏魏,刘中宪,赵永娇,等. 钢纤维超高性能混凝土单轴受压试验研究[J]. 工业建筑, 2016, 46(12):104-109.

KHALOO A R, KIM N. Mechanical Properties of Normal to High-Strength Steel Fiber-Reinforced Concrete[J]. Cement Concrete & Aggregates, 1996, 18(2):92-97.

SONG P S, HWANG S. Mechanical Properties of High-Strength Steel Fiber-Reinforced Concrete[J]. Construction & Building Materials, 2004, 18(9):669-673.

梁少阳,金宝宏,姚宇峰,等. 钢纤维长径比对C60混凝土抗裂性能的影响[J]. 广西大学学报(自然科学版),2018,43(2):641-647.

高丹盈,刘建秀. 纤维混凝土基本理论[M]. 北京:科学技术文献出版社,1994.

程红强. 纤维混凝土与老混凝土粘结性能试验研究[D]. 郑州:郑州大学, 2007.

朱海堂,高丹盈,张启明.钢纤维高强混凝土的劈拉及剪切变形性能[J].水利水电科技进展,2008,28(6):5-8.

孙举鹏,魏灯塔,王依璞. 钢纤维形状对混凝土力学性能的影响及湿喷支护应用研究[J]. 煤矿安全,2019,50(3):53-56.

徐旭炜. 钢纤维混凝土构件抗剪承载力试验研究[D].成都:西南交通大学,2018.

齐虎,李云贵,吕西林.混凝土弹塑性损伤本构模型参数及其工程应用[J].浙江大学学报(工学版),2015,49(3):547-554,563.

Relative Articles

Supplements(0)

Cited By

Proportional views