Citation: | LYU Yuangui, HU Longping, ZHANG Xiangchao, ZHANG Heng, LI Jianchuang, YU Min, CHI Yin. EXPERIMENTAL STUDY ON SEISMIC PERFORMANCE OF T-SHAPED PREFABRICATED CONCRETE SHEAR WALL CONNECTED WITH A VERTICAL SEAM[J]. INDUSTRIAL CONSTRUCTION, 2021, 51(5): 56-62. doi: 10.13204/j.gyjz201908300010 |
[1] |
蒋勤俭. 中国建筑产业化发展研究报告[J]. 混凝土世界, 2014(7):10-20.
|
[2] |
陈建伟, 苏幼坡. 预制装配式剪力墙结构及其连接技术[J]. 世界地震工程, 2013, 29(1):38-48.
|
[3] |
兰天晴, 赵少楠, 薛艺鹏, 等. 预制钢筋混凝土剪力墙结构抗震性能研究综述[J]. 土木建筑与环境工程, 2015, 37(增刊2):71-77.
|
[4] |
赵斌, 王庆杨, 吕西林. 采用全装配水平接缝的预制混凝土剪力墙抗震性能研究[J]. 建筑结构学报, 2018, 39(12):48-55.
|
[5] |
钱稼茹, 杨新科, 秦珩, 等. 竖向钢筋采用不同连接方法的预制钢筋混凝土剪力墙抗震性能试验[J]. 建筑结构学报, 2011, 32(6):51-59.
|
[6] |
刘家彬, 陈云钢, 郭正兴, 等. 装配式混凝土剪力墙水平拼缝U型闭合筋连接抗震性能试验研究[J]. 东南大学学报(自然科学版), 2013, 43(3):565-570.
|
[7] |
LU X, WANG D, ZHAO B. Experimental Study on Seismic Performance of Precast Concrete Shear Wall with Joint Connecting Beam Under Cyclic Loadings[A]//Experimental Research in Earthquake Engineering[C]. Cham:Springer, 2015:373-386.
|
[8] |
中华人民共和国住房和城乡建设部.装配式混凝土结构技术规程:JGJ 1-2014[S]. 北京:中国建筑工业出版社, 2014.
|
[9] |
刘亨, 徐其功. 全装配式混凝土墙板结构的竖向接缝研究[J]. 建筑结构, 2018, 48(7):68-72.
|
[10] |
BRUNESI E, NASCIMBENE R. Experimental and Numerical Investigation of the Seismic Response of Precast Wall Connections[J]. Bulletin of Earthquake Engineering, 2017, 15(12):5511-5550.
|
[11] |
张敏. 局部设缝T形与L形截面短肢剪力墙抗震性能试验研究[J]. 世界地震工程, 2014, 30(3):27-38.
|
[12] |
THOMSEN J H, WALLACE J W. Displacement-Based Design of Slender Reinforced Concrete Structural Walls-Experimental Verification[J]. Journal of Structural Engineering, 2004, 130(4):618-630.
|
[13] |
LI W, LI Q N, ZHAO J L. Experimental Study of T-Shaped RC Shear Wall Subjected to Cyclic Loading[J]. Iranian Journal of Science and Technology, Transactions of Civil Engineering, 2018, 42(2):191-198.
|
[14] |
LU X, YANG J. Seismic Behavior of T-Shaped Steel Reinforced Concrete Shear Walls in Tall Buildings Under Cyclic Loading[J]. The Structural Design of Tall and Special Buildings, 2015, 24:141-157.
|
[15] |
陈彬彬, 季静, 谢舜光, 等. T形RC剪力墙抗震变形指标限值试验[J]. 哈尔滨工业大学学报, 2018, 50(6):64-70.
|
[16] |
吕西林, 阳菊华, 蒋欢军. 型钢混凝土T形截面剪力墙抗震性能试验研究[J]. 建筑结构学报, 2014, 35(3):46-52.
|
[17] |
LIU C, NI X, WU H, et al. Calculation Theory and Test Verification for Skeleton Curve of T-Shaped Shear Walls[J]. Structural Engineering International, 2017, 27(2):281-291.
|
[18] |
刘晓楠, 郭正兴, 董年才, 等. 全预制装配剪力墙结构节点性能试验研究[J]. 江苏建筑, 2010(2):21-24.
|
[19] |
刘家彬, 陈云钢, 郭正兴, 等. 竖向新型连接装配式剪力墙抗震性能试验研究[J]. 湖南大学学报(自然科学版), 2014, 41(4):16-24.
|
[20] |
孙建, 邱洪兴, 谭志成, 等. 采用螺栓连接的工字形全装配式RC剪力墙试验研究[J]. 工程力学, 2018, 35(8):172-183.
|
[21] |
中华人民共和国住房和城乡建设部.建筑抗震试验规程:JGJ/T 101-2015[S]. 北京:中国建筑工业出版社, 2015.
|
[22] |
TANG J R. Seismic Resistance of Joints in Reinforced Concrete Frames[M]. Nanjing Southeast University Press, 1989:312-316.
|