doi:10.13204/j.gyjz201604026

Volume 46 Issue 4

Sep. 2016

Turn off MathJax

Article Contents

References

Article Navigation > INDUSTRIAL CONSTRUCTION > 2016 > 46(4): 135-141

PDF( 0 KB)

doi: 10.13204/j.gyjz201604026

Publish Date: 2016-04-30

Abstract

FullText(HTML)

References(0)

References

Relative Articles

[1]	YAO Junsuo, DENG Zongcai. A CALCULATION METHOD OF AXIAL COMPRESSIVE BEARING CAPACITY FOR SHORT SQUARE COLUMNS OF ULTRA-HIGH PERFORMANCE CONCRETE CONFINED BY HIGH-STRENGTH STIRRUPS[J]. INDUSTRIAL CONSTRUCTION, 2021, 51(2): 26-31. doi: 10.13204/j.gyjzG19111803
[2]	WANG Jingfeng, ZHANG Rong, WANG Wanqian, LIU Chao, ZHANG Huijie, WANG Can. EXPERIMENTS AND CALCULATION METHODS ON PERFORMANCE OF PREFABRICATED COLD-FORMED STEEL (CFS) COMPOSITE WALLS FILLED WITH LIGHT MORTAR UNDER AXIAL COMPRESSION[J]. INDUSTRIAL CONSTRUCTION, 2021, 51(8): 99-105. doi: 10.13204/j.gyjzG20072110
[3]	YAO Xingyou, CHENG Guowei, GUO Yanli, ZHOU Shui, YANG Jiabao. ANALYSIS ON OVERALL BUCKLING OF COLD-FORMED THIN-WALLED STEEL LIPPED CHANNEL BEAMS WITH WEB OPENINGS[J]. INDUSTRIAL CONSTRUCTION, 2021, 51(10): 101-108,100. doi: 10.13204/j.gyjzg21081302
[4]	YAO Xingyou, YIN Jiawen, GUO Yanli. AXIAL COMPRESSION TESTS AND THE DESIGN METHOD FOR COLD-FORMED THIN-WALLED LIPPED CHANNEL COLUMNS WITH WEB OPENINGS[J]. INDUSTRIAL CONSTRUCTION, 2021, 51(7): 113-122,208. doi: 10.13204/j.gyjzG2010908
[5]	YAO, Xingyou, GUO, Yanli, LIU. ANALYSIS ON DISTORTIONAL BUCKLING OF COLD-FORMED THIN-WALLED STEEL LIPPED CHANNEL STEEL MEMBERS WITH WEB OPENINGS UNDER AXIAL COMPRESSION[J]. INDUSTRIAL CONSTRUCTION, 2020, 50(1): 170-177. doi: 10.13204/j.gyjz202001027
[9]	Wang Chungang, Zhang Naiwen, Ma Ping. A SIMPLIFIED METHOD FOR CALCULATING ELASTIC DISTORTIONAL BUCKLING STRESS OF CHANNELS WITH COMPLEX EDGE STIFFENERS AND INTERMEDIATE STIFFENERS UNDER AXIAL COMPRESSIVE LOAD[J]. INDUSTRIAL CONSTRUCTION, 2014, 44(05): 116-121. doi: 10.13204/j.gyjz201405026
[10]	Zhang Shuigen, Tong Genshu, Zhang Lei. LOCAL AND DISTORTIONAL BUCKLING OF COLD-FORMED C AND Z-SECTION MEMBERS UNDER AXIAL COMPRESSION[J]. INDUSTRIAL CONSTRUCTION, 2013, 43(12): 38-44. doi: 10.13204/j.gyjz201312006
[11]	Zhang Shuigen, Tong Genshu, Zhang Lei. LOCAL AND DISTORTIONAL BUCKLING OF COLD-FORMED C AND Z-SECTION MEMBERS UNDER BENDING[J]. INDUSTRIAL CONSTRUCTION, 2013, 43(12): 45-51,33. doi: 10.13204/j.gyjz201312007
[12]	Yao Jian, Tang Tingting, Chen Baixin. COMPARISON AND STUDY ON CALCULATION METHODS OF COLD-FORMED THIN-WALLED LIPPED CHANNEL MEMBERS' CAPACITY OF DISTORTIONAL BUCKLING[J]. INDUSTRIAL CONSTRUCTION, 2013, 43(6): 120-123. doi: 10.13204/j.gyjz201306024
[13]	Zhang Xuqiao, Guo Yanlin, Jiang Ziqin. SHEAR AND BEND-CARRYING CAPACITY OF H-SHAPED MEMBERS WITH SINUSOIDAL CORRUGATED WEB WITH OPENINGS[J]. INDUSTRIAL CONSTRUCTION, 2012, 42(7): 37-44. doi: 10.13204/j.gyjz201207005
[14]	Wang Chungang, Song Daijun, Zhang Zhuangnan. STABILITY BEHAVIOR OF COLD-FORMED THIN-WALLED STEEL FIXED-ENDED CHANNELS WITH COMPLEX EDGE STIFFENERS UNDER AXIAL COMPRESSIVE LOAD[J]. INDUSTRIAL CONSTRUCTION, 2012, 42(2): 120-124. doi: 10.13204/j.gyjz201202027
[15]	Luo Hongguang, Guo Yaojie, Li Kun, Yang Qinyuan. RESEARCH ON THE APPLIED CALCULATION METHOD FOR THE BUCKLING OF COLD-FORMED LIPPED CHANNEL COLUMNS UNDER AXIAL PRESSURE[J]. INDUSTRIAL CONSTRUCTION, 2011, 41(8): 96-100. doi: 10.13204/j.gyjz201108023
[16]	Guo Lanhui, Zhang Sumei. SIMPLIFIED METHOD OF BEARING CAPACITY OF CONCRETE-FILLED RECTANGULAR STEEL TUBE COLUMNS CONSIDERING LOCAL BUCKLING SUBJECTED TO AXIAL COMPRESSION[J]. INDUSTRIAL CONSTRUCTION, 2009, 39(7): 98-102. doi: 10.13204/j.gyjz200907027
[17]	Wang Haiming, Zhang Yaochun. DISTORTIONAL BUCKLING PERFORMANCE STUDY ON FLEXURAL MEMBERS WITH UPRIGHT AND INCLINED EDGE STIFFENERS[J]. INDUSTRIAL CONSTRUCTION, 2008, 38(6): 106-109. doi: 10.13204/j.gyjz200806027
[18]	Jiang Lu, He Baokang, Ma Rongkui, Yang Songling. COMPARISON AND ANALYSIS OF LIPPED CHANNEL FLEXURAL MEMBERS' CAPACITY CALCULATED BY SPECIFICATION NAS 2004 AND GB 50018-2002[J]. INDUSTRIAL CONSTRUCTION, 2007, 37(6): 91-94. doi: 10.13204/j.gyjz200706023
[19]	Wang Chungang, Zhang Yaochun. AXIALLY LOADED CARRYING CAPACITY CALCULATION OF THIN-WALLED COLD-FORMED CHANNEL COLUMNS WITH INCLINED SIMPLE EDGE STIFFENERS BY DIRECT STRENGTH METHOD[J]. INDUSTRIAL CONSTRUCTION, 2006, 36(1): 71-74. doi: 10.13204/j.gyjz200601021

Supplements(0)

Cited By

Cited by

Periodical cited type(7)

1.	金路，钱晶晶，徐冬，张飞扬，陈强. 双肢梯形冷弯薄钢格构柱轴压承载力研究. 沈阳建筑大学学报(自然科学版). 2022(02): 218-226 .
2.	郭彦利，胡鹏文，姚行友. 腹板开矩形孔冷弯薄壁型钢卷边槽形截面柱畸变屈曲性能与设计. 南昌工程学院学报. 2021(06): 22-31 .
3.	姚行友，程国威，郭彦利，周水，杨嘉宝. 腹板开孔冷弯薄壁卷边槽钢受弯构件整体屈曲性能分析. 工业建筑. 2021(10): 101-108+100 . 本站查看
4.	姚行友. 线性变化压力下矩形孔薄板屈曲性能与有效宽度计算方法. 工业建筑. 2021(11): 112-120 . 本站查看
5.	武胜，魏源. 腹板开孔新型冷弯薄壁构件受弯性能研究. 沈阳建筑大学学报(自然科学版). 2020(01): 29-37 .
6.	姚行友，郭彦利，柳亚华，苏坚艺，胡翌. 腹板开孔冷弯卷边槽钢轴压构件畸变屈曲分析. 工业建筑. 2020(01): 170-177 . 本站查看
7.	李浴阳. 建筑支撑结构节点轴压承载性自动检测仿真. 计算机仿真. 2019(05): 475-479 .