DISCUSSION ON OPTIMIZING THE DESIGN PROCESS BASED ON BIM

Zhang Xiaofei

doi:10.13204/j.gyjz201307034

Volume 43 Issue 7

Dec. 2014

Turn off MathJax

Article Contents

Abstract

References

Article Navigation > INDUSTRIAL CONSTRUCTION > 2013 > 43(7): 155-158

Zhang Xiaofei. DISCUSSION ON OPTIMIZING THE DESIGN PROCESS BASED ON BIM[J]. INDUSTRIAL CONSTRUCTION, 2013, 43(7): 155-158. doi: 10.13204/j.gyjz201307034

Citation:

Zhang Xiaofei. DISCUSSION ON OPTIMIZING THE DESIGN PROCESS BASED ON BIM[J]. INDUSTRIAL CONSTRUCTION, 2013, 43(7): 155-158. doi: 10.13204/j.gyjz201307034

Zhang Xiaofei. DISCUSSION ON OPTIMIZING THE DESIGN PROCESS BASED ON BIM[J]. INDUSTRIAL CONSTRUCTION, 2013, 43(7): 155-158. doi: 10.13204/j.gyjz201307034

Citation:

Zhang Xiaofei. DISCUSSION ON OPTIMIZING THE DESIGN PROCESS BASED ON BIM[J]. INDUSTRIAL CONSTRUCTION, 2013, 43(7): 155-158. doi: 10.13204/j.gyjz201307034

PDF( 0 KB)

DISCUSSION ON OPTIMIZING THE DESIGN PROCESS BASED ON BIM

doi: 10.13204/j.gyjz201307034

Zhang Xiaofei

1.
Shanghai Modern Architectural Design Group,Shanghai 200041,China

Received Date: 2013-02-20
Publish Date: 2013-07-20

Abstract

Abstract

The development of BIM in China is still at the primary stage.The scope of application is mainly limited within the design phase, whose purpose is to build a three-dimension model, which is far from what is expected.Based on the present situation, it was analyzed the application concept of BIM at the design phase in order to promote effectively the use of BIM, and then pointed out the problems during the use of BIM, which were also summarized for optimizing the design process.
- building information modeling (BIM),
- optimizing process,
- design phase

FullText(HTML)

References(8)

References

王广斌,张洋,姜阵剑,等.建设项目施工前各阶段 BIM 应用方受益情况研究[J].山东建筑大学学报,2009,24(5):438－442.

[2] 马智亮.BIM 技术及其在我国的应用问题和对策[J].信息化,2010(2):12－15.

[3] 张洋.基于 BIM 的工程项目集成化建设理论及关键问题研究[D].上海:同济大学,2010.

[4] 张建新.建筑信息模型在我国工程设计行业中应用障碍研究[J].工程管理学报,2010,24(4):387－392.

[5] Autodesk.Building Information Modeling for Sustainable Design.Autodesk REVIT White Paper.2005.

[6] 陈宇军,刘玉龙.BIM 协同设计的现状及未来[J].信息化,2010(2):26－29.

[7] 李紫东,张原.基于协同工作平台的大型建设项目组织界面管理[J].价值工程,2010,20:68－69.

[8] 岳杰.BIM 技术及其在建筑设计中的应用[J].四川建材,2011(10):270－271.

Relative Articles

[1]	YE Jinxin, HE Wenfang, LIU Jiaping. A Thermal Shielding Model and Shading Optimization Design for Vernacular Buildings in Extreme Arid Climate Areas[J]. INDUSTRIAL CONSTRUCTION, 2023, 53(7): 7-15,31. doi: 10.13204/j.gyjzG22020705
[2]	WANG Libo, LIN Zhongcai, HAN Jinwen. Research on Intelligent Demolition Method Based on BIM and 3D Scanning[J]. INDUSTRIAL CONSTRUCTION, 2023, 53(2): 12-21. doi: 10.13204/j.gyjzG22012601
[3]	ZHAO Jun, WANG Yadong, GAO Ning, JI Xiaohui, TIAN Yu. Application and Development of BIM and New Generation of Information Technology Based on Structural Equation Model[J]. INDUSTRIAL CONSTRUCTION, 2022, 52(12): 200-208. doi: 10.13204/j.gyjzG21091610
[12]	Wang Haiyuan Huang Zhisheng Huang Jiajin Zhong Ning, . USING ONTOLOGY TECHNOLOGY IN BIM SYSTEM[J]. INDUSTRIAL CONSTRUCTION, 2015, 45(6): 186-189. doi: 10.13204/j.gyjz201506037
[13]	Dong Xiao, Wang Yifan, Wu Shaopeng, Gong Jinghai. APPLICATION OF BIM IN SIMULATION OF IMPORTANT LOAD LIFTING FOR AP1000 NUCLEAR PLANT[J]. INDUSTRIAL CONSTRUCTION, 2014, 44(07): 178-182. doi: 10.13204/j.gyjz2001407037
[14]	Zhuang Lili, Zeng Jian, Hong Zaisheng. DISCUSSION ON THE FUNCTION EXTENSION OF THE CINEMA BUILDING IN THE INFORMATION AGE[J]. INDUSTRIAL CONSTRUCTION, 2013, 43(8): 165-169. doi: 10.13204/j.gyjz201308035
[15]	Zhang Hualing, Zhou Tiantian. SIMULATION RESEARCH ON NATURAL VENTILATION IN THE LOW-CARBON ARCHITECTURE DESIGN PHASE[J]. INDUSTRIAL CONSTRUCTION, 2012, 42(2): 1-4. doi: 10.13204/j.gyjz201202001