OPTIMIZATION OF THE PULTRUSION PROCESS PARAMETERS OF CFRP PLATES

Hong Bin; Xian Guijun; Li Hui

doi:10.13204/j.gyjz201306003

Volume 43 Issue 6

Dec. 2014

Turn off MathJax

Article Contents

Article Navigation > INDUSTRIAL CONSTRUCTION > 2013 > 43(6): 9-13,26

Hong Bin, Xian Guijun, Li Hui. OPTIMIZATION OF THE PULTRUSION PROCESS PARAMETERS OF CFRP PLATES[J]. INDUSTRIAL CONSTRUCTION, 2013, 43(6): 9-13,26. doi: 10.13204/j.gyjz201306003

Citation:

Hong Bin, Xian Guijun, Li Hui. OPTIMIZATION OF THE PULTRUSION PROCESS PARAMETERS OF CFRP PLATES[J]. INDUSTRIAL CONSTRUCTION, 2013, 43(6): 9-13,26. doi: 10.13204/j.gyjz201306003

Hong Bin, Xian Guijun, Li Hui. OPTIMIZATION OF THE PULTRUSION PROCESS PARAMETERS OF CFRP PLATES[J]. INDUSTRIAL CONSTRUCTION, 2013, 43(6): 9-13,26. doi: 10.13204/j.gyjz201306003

Citation:

Hong Bin, Xian Guijun, Li Hui. OPTIMIZATION OF THE PULTRUSION PROCESS PARAMETERS OF CFRP PLATES[J]. INDUSTRIAL CONSTRUCTION, 2013, 43(6): 9-13,26. doi: 10.13204/j.gyjz201306003

PDF( 0 KB)

OPTIMIZATION OF THE PULTRUSION PROCESS PARAMETERS OF CFRP PLATES

doi: 10.13204/j.gyjz201306003

1.
School of Civil Engineering,Harbin Institute of Technology,Harbin 150090,China

Received Date: 2013-02-10
Publish Date: 2013-06-20

Abstract

Abstract

The pultrusion process parameters having influence on the mechanical properties of CFRP plates based on Taguchi method and the optimal pultrusion process parameters for producing CFRP plates with high mechanical properties are studied.The results show that fiber content, epoxy resin types, draw rate and mold temperature are the main factors influencing the mechanical properties of CFRP plates, post-curing temperature and fiber tension have less influence, the influence of glue tank temperature can be neglected.
- CFRP plates,
- mechanical properties,
- optimization,
- process parameters

FullText(HTML)

References(6)

References

牛向阳,王全凤．预应力 FRP 加固钢筋混凝土梁的性能综述[J].福建建筑,2010,141(3):54－55.

[2] 王兴国,周朝阳,曾宪桃,等．外贴预应力 GFRP 板加固混凝土梁抗弯试验研究[J].哈尔滨工业大学学报,2005,37(3):351－354.

[3] Wu Z S,Li W X,Sakuma N.Innovative Externally Bonded FRP /?Concrete Hybrid Flexural Members[J].Composite Structures,2006,72(3):289－300.

[4] Wu Z S.Structural Strengthening and Integrity with Hybrid FRP?Composites [C]//Proc.of the 2 nd Inter.Confer.on FRP?Composites in Civil Engineering-CICE 2004.Australia,Keynote?Lecture:2004:93－105.

[5] 滕锦光,陈建飞.FRP 加固混凝土结构[M].中国建筑工业出版社,2004.

[6] Sun Z Y,Yang Y,Qin W H,et al.Experimental Study on?Flexural Behavior of Concrete Beams Reinforced by Steel-Fiber?Reinforced Polymer Composite Bars [J].Journal of Reinforced?Plastics and Composites,2012,31(3):1737－1745

Relative Articles

Supplements(0)

Cited By

Proportional views