FLEXURAL BEHAVIOR OF CORRODED REINFORCED CONCRETE BEAMS STRENGTHENED WITH CARBON FIBER COMPOSITE SHEETS

Jia Bin; Cheng Jin; Meng Naiqing; Liu Shunfeng

doi:10.13204/j.gyjz201305030

Volume 43 Issue 5

Dec. 2014

Turn off MathJax

Article Contents

Abstract

References

Article Navigation > INDUSTRIAL CONSTRUCTION > 2013 > 43(5): 144-147

Jia Bin, Cheng Jin, Meng Naiqing, Liu Shunfeng. FLEXURAL BEHAVIOR OF CORRODED REINFORCED CONCRETE BEAMS STRENGTHENED WITH CARBON FIBER COMPOSITE SHEETS[J]. INDUSTRIAL CONSTRUCTION, 2013, 43(5): 144-147. doi: 10.13204/j.gyjz201305030

Citation:

Jia Bin, Cheng Jin, Meng Naiqing, Liu Shunfeng. FLEXURAL BEHAVIOR OF CORRODED REINFORCED CONCRETE BEAMS STRENGTHENED WITH CARBON FIBER COMPOSITE SHEETS[J]. INDUSTRIAL CONSTRUCTION, 2013, 43(5): 144-147. doi: 10.13204/j.gyjz201305030

Citation:

PDF( 0 KB)

FLEXURAL BEHAVIOR OF CORRODED REINFORCED CONCRETE BEAMS STRENGTHENED WITH CARBON FIBER COMPOSITE SHEETS

doi: 10.13204/j.gyjz201305030

1.
1. School of Civil Engineering and Architecture,Southwest University of Science and Technology,Mianyang 621010,China;
2.
2. The Architecture Design and Research Institute of Tsinghua University,Beijing100084,China;
3.
3. Office of Seismic Protection of Building Constructions in Tibet,Lhasa 850000,China

Received Date: 2012-12-03
Publish Date: 2013-05-20

Abstract

Abstract

Through the experiment of the bending capacity of the corroded reinforced concrete beams before and after strengthened with CFRP sheets, the influence of the secondary load and corrosion on the load-carrying capacity and rigidity of reinforced concrete beams was discussed.The results of the study show that the load-carrying capacity and rigidity of corroded reinforced concrete beams with CFRP sheets have been improved in different degrees.The lagged strain caused by the secondary load would influence the effect of its high tensile strength.And the change of mechanical properties of the corroded reinforced concrete beams reduced the bending capacity of beams strengthened with CFRP sheets.Based on the mechanical properties of the corroded reinforced concrete beams, the numerical simulation technology of the whole bending process of the corroded reinforced concrete beams strengthened with CFRP sheets was established.The good conformity of the calculation results and the experimental results can provide reference for the reinforcement design of the corroded reinforced concrete beams in the future.
- carbon fiber sheet,
- corroded RC beams,
- secondary load,
- flexural capacity

FullText(HTML)

References(11)

References

[2] Mahmoud T E,Joseph W T. Analysis of Reinforced Concrete?Beams Strengthened with FRP Laminates[J]. Journal of Structural?Engineering,ASCE,2000,126(6):684-691.

叶列平,冯鹏. FRP 在工程结构中的应用与发展[J].土木工程学报,2006,39(3):24-36.

[3] Spadea G,Swamy R N,Bencardino F. Strength and Ductility of?RC Beams Repaired Withbonded CFRP Laminates[J]. Journal of?Bridge Engineering,2001,6(5):334-355.

[4] 黄凤霞,曹双寅,蔺新艳. CFRP 加固钢筋混凝土梁抗裂?刚度等正常使用性能试验研究[J].工程抗震与加固改造,2011,33(5):53-57.

[5] 彭晖,张建仁,尚守平.预应力碳纤维加固钢筋混凝土梁的二次受力性能研究[J].工业建筑,2011,41(3):108-112.

[6] 朱彦鹏,廖永石,郑建军,等.二次受力下 CFRP 加固钢筋混凝土梁抗弯试验研究[J].建筑结构,2010( s2):379-381.

[7] 谷有法.考虑二次受力的 CFRP 加固混凝土梁抗弯性能研究[D].沈阳:沈阳工业大学,2010.

[8] 全明研.老化和损伤的钢筋混凝土构件的性能[J].工业建筑,1990,20(2):15-19.

[9] 牛荻涛,王庆霖,王林科.锈蚀开裂前混凝土中钢筋锈蚀量的预测模型[J].工业建筑,1996,26(4):8-10,62.

[10] 周宇,张皓.混凝土碳化后的力学性能研究[J].佳木斯大学学报:自然科学版,2005,23(2):318-320,323.

[11] 孟丽岩,王凤来,潘景龙.既有未碳化混凝土力学性能的试验研究[J].工业建筑,2004,34(7):44-46.

Relative Articles

[1]	LIU Zhaowei, GUO Xingxing, HAN Yanqing, LIU Qianqian, WU Ning, LIU Chaofeng. Prediction of Residual Flexural Capacity of Reinforced Concrete Beams After Fire[J]. INDUSTRIAL CONSTRUCTION, 2023, 53(11): 221-225. doi: 10.13204/gyjzG22120508
[2]	GUO Zhaosheng, HE Wubin, LIU Jialong, AN Zengjun. Experimental Research on Shear Capacity of PHC Pipe Pile Strengthened with CFRP[J]. INDUSTRIAL CONSTRUCTION, 2022, 52(6): 7-11,54. doi: 10.13204/j.gyjzG21111710
[3]	JIN Lingzhi, LIAN Deming, LI Li, LIANG Xi. EXPERIMENTAL RESEARCH ON FLEXURAL BEHAVIOR OF UHPC COMPOSITE SLABS WITH STEEL TRUSS[J]. INDUSTRIAL CONSTRUCTION, 2020, 50(3): 69-75. doi: 10.13204/j.gyjz202003012
[4]	NIU Ditao, CHEN Lei, LIU Xiguang. A CALCULATION METHOD OF FLEXURAL CAPACITY OF REINFORCED CONCRETE BEAMS CORRODED BY SULFURIC ACID[J]. INDUSTRIAL CONSTRUCTION, 2020, 50(12): 50-54,68. doi: 10.13204/j.gyjzG19113014
[5]	GE Wenjie, YU Jiamin, GAO Peiqi, SONG Wanrong, QIU Shengwei, CHEN Qiubing, JI Suidong. EXPERIMENTAL RESEARCH ON THE FLEXURAL BEHAVIOR OF FRP REINFORCED ECC-CONCRETE COMPOSITE BEAMS STRENGTHENED WITH CARBON FIBER SHEET[J]. INDUSTRIAL CONSTRUCTION, 2020, 50(2): 163-168. doi: 10.13204/j.gyjz202002025
[6]	HAN Fei, KONG Xiangqing, XING Lili, HE Wenchang, WANG Xuezhi. EXPERIMENTAL RESEARCH ON FLEXURAL CAPACITY OF RECYCLED AGGREGATE CONCRETE BEAMS MIXED WITH STEEL FIBERS REINFORCED WITH BFRP BARS[J]. INDUSTRIAL CONSTRUCTION, 2020, 50(6): 167-174. doi: 10.13204/j.gyjz202006027
[7]	Sun Wenbin, Tian Hongbin, Wang Jinli. EXPERIMENTAL STUDY ON FLEXURAL CAPACITY OF PREFABRICATION AND ASSEMBLY BEAM[J]. INDUSTRIAL CONSTRUCTION, 2015, 45(2): 57-61. doi: 10.13204/j.gyjz201502013
[8]	Xu Yehui, Li Bin, Xun Yong. EXPERIMENTAL RESEARCH ON SECONDARY BENDING BEHAVIOR OF REINFORCED CONCRETE BEAMS STRENGTHENED WITH TEXTILE REINFORCED CONCRETE SHEETS[J]. INDUSTRIAL CONSTRUCTION, 2015, 45(1): 173-178. doi: 10.13204/j.gyjz201501035
[9]	Zhang Rujun, Geng Ou, Chai Boshi. RESEARCH EXPERIMENT OF THE BEAM-TO-COLUMN JOINT REINFORCED BY CFRP AT NEGATIVE MOMENT AREAS[J]. INDUSTRIAL CONSTRUCTION, 2014, 44(07): 175-177. doi: 10.13204/j.gyjz2001407036
[10]	Chu Yunpeng, Yao Yong, Deng Yongjun, Xia Xiaoning, Chen Daiguo. EXPERIMENTAL STUDY ON CONSTRUCTION PROCESS AND BENDING CAPACITY OF DAMAGED RC BEAM STRENGTHENED BY COMPOSITE CFRP SHEETS[J]. INDUSTRIAL CONSTRUCTION, 2012, 42(4): 73-77. doi: 10.13204/j.gyjz201204016
[11]	Xiong Xueyu, Xu Haifeng. RESEARCH ON RC BEAMS COMBINATION STRENGTHENED WITH CARBON FIBER REINFORCED POLYMER AND STEEL PLATES UNDER SUSTAINING LOAD[J]. INDUSTRIAL CONSTRUCTION, 2010, 40(4): 131-136. doi: 10.13204/j.gyjz201004028
[12]	Zhang Guangtai, Liu Qing, Wang Kexin. BENDING TESTS AND NUMERICAL ANALYSIS OF CFRP STRENGTHENED RC BEAMS[J]. INDUSTRIAL CONSTRUCTION, 2009, 39(8): 80-83. doi: 10.13204/j.gyjz200908021
[13]	Huang Hua, Liu Boquan, Liu Weiduo. EXPERIMENTAL STUDY OF SHEAR BEHAVIOR OF RC BEAMS STRENGTHENED WITH STAINLESS STEEL WIRE MESH AND POLYMER MORTAR UNDER SECONDARY LOAD[J]. INDUSTRIAL CONSTRUCTION, 2009, 39(2): 123-127. doi: 10.13204/j.gyjz200902024
[14]	Yuan Ni-fei, Yao Jian. STUDY ON THE FLEXURAL CAPACITY OF RC BEAMS STRENGTHENED WITH NEAR SURFACE MOUNTED CFRP PLATES[J]. INDUSTRIAL CONSTRUCTION, 2006, 36(10): 104-106. doi: 10.13204/j.gyjz200610029
[15]	An Ming-liang. EXPERIMENTAL STUDIES ON BENDING LOAD CAPACITY OF RC BEAM STRENGTHENED WITH CFRP PLATE[J]. INDUSTRIAL CONSTRUCTION, 2006, 36(10): 43-45. doi: 10.13204/j.gyjz200610013
[16]	Wang Bu, Wang Pu, Xia Chunhong. EXPERIMENTAL INVESTIGATION AND MECHANISM ANALYSIS OF RC BEAM-COLUMN JOINTS SHEAR PERFORMANCE STRENGTHENED AROUND CORE BY CFRP SHEETS[J]. INDUSTRIAL CONSTRUCTION, 2005, 35(7): 29-33,38. doi: 10.13204/j.gyjz200507010
[17]	Tian Shui, Gu Qian. RESEARCH ON FORCED PERFORMANCE OF RC BEAMS STRENGTHENED WITH PRESTRESSED CFRP[J]. INDUSTRIAL CONSTRUCTION, 2005, 35(6): 88-91. doi: 10.13204/j.gyjz200506026
[18]	Xue Ping. COMPUTATIONAL METHOD OF BEARING CAPACITY OF BENDING NORMAL SECTION OF REINFORCED CONCRETE BEAM WITH RECTANGULAR SECTION STRENGTHENED BY CFRP[J]. INDUSTRIAL CONSTRUCTION, 2004, 34(5): 76-77,90. doi: 10.13204/j.gyjz200405024
[19]	Zheng Guodong, Hou Faliang. EFFECT OF SECONDARY LOADING ON CALCULATION RESULTS OF NORMAL SECTION'S ULTIMATE BEARING CAPACITY OF RC BEAMS STRENGTHENED WITH CFRP[J]. INDUSTRIAL CONSTRUCTION, 2004, 34(5): 73-75. doi: 10.13204/j.gyjz200405023
[20]	Wang Zijun, Liu Weiqing, Yao Qiulai, Dai Yunxiang. EXPERIMENTAL RESEARCH ON THE FLEXURAL BEHAVIOR OF RC BEAMS STRENGTHENED BY CARBON FIBER SHEET UNDER QUADRATIC LOADING[J]. INDUSTRIAL CONSTRUCTION, 2004, 34(7): 85-87. doi: 10.13204/j.gyjz200407025