THE INSPECTION AND REINFORCEMENT ON THE STEEL TRUSS OF A BELT TRANSPORT CORRIDOR

Yang Jue; Zheng Qizhen; Han Mingfei

doi:10.13204/j.gyjz201303029

Volume 43 Issue 3

Dec. 2014

Turn off MathJax

Article Contents

Abstract

References

Article Navigation > INDUSTRIAL CONSTRUCTION > 2013 > 43(3): 138-141,124

Yang Jue, Zheng Qizhen, Han Mingfei. THE INSPECTION AND REINFORCEMENT ON THE STEEL TRUSS OF A BELT TRANSPORT CORRIDOR[J]. INDUSTRIAL CONSTRUCTION, 2013, 43(3): 138-141,124. doi: 10.13204/j.gyjz201303029

Citation:

Yang Jue, Zheng Qizhen, Han Mingfei. THE INSPECTION AND REINFORCEMENT ON THE STEEL TRUSS OF A BELT TRANSPORT CORRIDOR[J]. INDUSTRIAL CONSTRUCTION, 2013, 43(3): 138-141,124. doi: 10.13204/j.gyjz201303029

Citation:

PDF( 0 KB)

THE INSPECTION AND REINFORCEMENT ON THE STEEL TRUSS OF A BELT TRANSPORT CORRIDOR

doi: 10.13204/j.gyjz201303029

1.
Department of Civil Engineering,University of Shanghai for Science and Technology,Shanghai 200093,China

Received Date: 2012-07-24
Publish Date: 2013-03-20

Abstract

Abstract

Belt transport corridor is an industrial building in the more common structure form.Along with the increase of the service time,there are many problems in the steel truss,such as corrosion damage,deformation etc.On the basis of a belt transport corridor steel truss structure inspection,it was found out the dangerous points,and pointed out that this kind of structure in use could face the problems.Combined with the actual problem,the paper put forward the reinforcement scheme.
- passage corridor,
- steel truss,
- inspection,
- reinforcement

FullText(HTML)

References(10)

References

姜迎秋.工业皮带运输通廊钢桁架腐蚀损坏状况和处理对策[J].工业建筑,1995,25(10):3－7.

[2] 雷宏刚.钢结构事故分析与处理.[M].北京:中国建材工业出版社,2006.

[3] GB 501442008工业建筑可靠性鉴定标准[S].

[4] YBJ 21989钢铁工业建(构)筑物可靠性鉴定规程[S].

[5] GB 500092001建筑结构荷载规范[S].

[6] GB 500112010建筑抗震设计规范[S].

[7] 北京金木软件技术有限公司. SAP2000中文版使用指南[M].北京:人民交通出版社,2006.

[8] GB 500092001钢结构设计规范[S].

[9] 张家启.工业通廊的损坏与修复[J].工业建筑,1994,24(3):3－5.

[10] 郭兵,雷淑忠.钢结构的检测鉴定与加固改造[M].北京:中国建筑工业出版社,2006.

Relative Articles

[1]	LIANG Xu, WANG Yunhao, TAN Lik-ho, HU Lili, FENG Peng. A New Reinforcement Technique and Stability Analysis for Large Composite Storage Tank Roofs[J]. INDUSTRIAL CONSTRUCTION, 2024, 54(1): 140-146. doi: 10.3724/j.gyjzG23092009
[2]	ZHANG Dongbo, JIANG Yan, LENG Yubing. Applications and Analysis of Ultrasonic Testing Technique for Defects in Bottom Joints of Precast Shear Wall Structures[J]. INDUSTRIAL CONSTRUCTION, 2023, 53(9): 128-137. doi: 10.13204/j.gyjzG23072411
[3]	LIU Wenzheng, CUI Shiqi. EXPERIMENTAL STUDY AND PARAMETRIC ANALYSIS ON FLEXURAL PROPERTIES OF BILATERAL PRESTRESSED COMPOSITE CONCRETE SLABS WITH STEEL TRUSSES[J]. INDUSTRIAL CONSTRUCTION, 2021, 51(2): 32-39,31. doi: 10.13204/j.gyjzG20011704
[4]	Zhou Zhiyun, Zhan Yawei, Yang Jue, Yang Fei, Han Mingzhen. DETECTION AND REINFORCEMENT OF AN EXCELLENT HISTORIC BUILDING[J]. INDUSTRIAL CONSTRUCTION, 2014, 44(09): 166-171.
[5]	Shu Biqing, Zheng Juan. DETECTION APPRAISAL AND STRENGTHENING OF A BENT FRAME STRUCTURE PLANT[J]. INDUSTRIAL CONSTRUCTION, 2014, 44(06): 139-142. doi: 10.13204/j.gyjz201406030
[6]	Heng Panha, Nie Jianguo, Yu Zhouliang. EXPERIMENTAL STUDY OF COMPOSITE BEAM ASSEMBLED BY STEEL TRUSS AND CONCRETE[J]. INDUSTRIAL CONSTRUCTION, 2013, 43(10): 122-128,133. doi: 10.13204/j.gyjz201310026
[7]	He Shihua. ASSESSMENT AND REINFORCEMENTS OF THE PIERS AND GIRDER OF A HIGHSPEED RAILWAY BRIDGE AFTER FIRE[J]. INDUSTRIAL CONSTRUCTION, 2012, 42(12): 143-145,160. doi: 10.13204/j.gyjz201212031
[8]	Liu Qing, Zhou Hu. RESEARCH ON DENSITY DETECTION METHOD OF ROCK-FILLED CONCRETE BY INFRARED IMAGING TECHNOLOGY[J]. INDUSTRIAL CONSTRUCTION, 2011, 41(3): 113-115,134. doi: 10.13204/j.gyjz201103022
[9]	Liu Wenjing, Yang Jianzhong, Wang Ni. INSPECTION AND REINFORCEMENT OF HYDROCHLORIC ACID CORROSION ACCIDENT OF A CONCRETE STRUCTURE[J]. INDUSTRIAL CONSTRUCTION, 2011, 41(6): 139-141,145. doi: 10.13204/j.gyjz201106030
[10]	Zhan Jinlin, Shui Weihou, He Lijun, Cheng Xiaocheng. 12 000 kN·m ENERGY DYNAMIC COMPACTION EXPERIMENT FOR COLLAPSIBLE LOESS[J]. INDUSTRIAL CONSTRUCTION, 2010, 40(6): 93-96. doi: 10.13204/j.gyjz201006021
[11]	Yuan Chengfang, Niu Ditao, Wang Qinglin, Yuan Bo. SAFETY EVALUATION AND STRUCTURE STRENGTHENING OF A CHEMICAL PLANT SUBJECTED TO FIRE DISASTER[J]. INDUSTRIAL CONSTRUCTION, 2010, 40(6): 113-117. doi: 10.13204/j.gyjz201006026
[12]	Sun Xinpeng, Li Yijin, Liao Hong, Zi Wei, Wu Canliang. INTELLIGENCE DETECTION AND CONTROL TECHNIQUE OF PRESTRESSED CONCRETE AND ENGINEERING APPLICATION[J]. INDUSTRIAL CONSTRUCTION, 2009, 39(9): 103-106. doi: 10.13204/j.gyjz200909022
[13]	Zheng Qizhen, Bao Yongliang, Wei Lin. THE DETECTION & IDENTIFICATION ON THE MAJOR STRUCTURE OF PROTECTED HISTORICAL SIGNIFICANT BUILDING[J]. INDUSTRIAL CONSTRUCTION, 2009, 39(8): 1-3,7. doi: 10.13204/j.gyjz200908001
[14]	Chang Haosong, Yang Jianping, Gong Junqing, Hui Yunling, Mu Hongyuan. STRUCTURE DETECT AND COMPUTATION ANALYSIS OF THE SKEW BRIDGE IN A PUDDLING FURNACE[J]. INDUSTRIAL CONSTRUCTION, 2008, 38(3): 112-114. doi: 10.13204/j.gyjz200803030
[15]	Chen Dachuan, Hu Haibo. DETECTION AND REINFORCEMENT DESIGN OF A MODERN ARCHITECTURE[J]. INDUSTRIAL CONSTRUCTION, 2007, 37(7): 100-103. doi: 10.13204/j.gyjz200707029
[16]	Liu Jin-gbo, Du Yi-xin, Fei Bi-gang, Wang Yan, Liu Yang-bing. THE STOREY-ADDING AND REINFORCEMENT DESIGN AND CONSTRUCTION FOR A BUILDING[J]. INDUSTRIAL CONSTRUCTION, 2006, 36(10): 93-96. doi: 10.13204/j.gyjz200610026
[17]	Gao Peiguo, Lu Yiyan Wu, Qixiang. TESTING AND STRENGTHENING FOR THE MAIN FACTORY BUILDING OF A POWER PLANT AFTER A FIRE HAZARD[J]. INDUSTRIAL CONSTRUCTION, 2006, 36(3): 99-101. doi: 10.13204/j.gyjz200603026
[18]	Song Xiang. DETECTION AND RESTORATION OF BUILDING WITH CONCRETE FRAME AFTER FIRE[J]. INDUSTRIAL CONSTRUCTION, 2005, 35(6): 92-94. doi: 10.13204/j.gyjz200506027
[19]	Lu Linfeng, Gu Qiang, Su Mingzhou, Shen Lin, Hu Tianbing. JOINT TEXTURE AND DESIGN MAIN POINTS OF STEEL STAGGERED TRUSS[J]. INDUSTRIAL CONSTRUCTION, 2005, 35(7): 83-85,79. doi: 10.13204/j.gyjz200507024
[20]	Wang Changyong, Zhao Quan. PREVENTION AND TREATMENT OF QUALITY ACCIDENT OF CONSTRUCTION JOINT IN THE CONNECTION OF BEAM AND COLUMN FOR FRAME STRUCTURE[J]. INDUSTRIAL CONSTRUCTION, 2004, 34(10): 91-93. doi: 10.13204/j.gyjz200410027