OPTIMIZATION DESIGN ON THE ROOF OF LARGE LNG TANK

Xie Jian; He Fei

doi:10.13204/j.gyjz201204017

Volume 42 Issue 4

Dec. 2014

Turn off MathJax

Article Contents

Abstract

References

Article Navigation > INDUSTRIAL CONSTRUCTION > 2012 > 42(4): 78-81,98

Wang Xin, Yang Shirong, Feng Yonggang. THE ON-SITE TEST OF PUMPING PRESSURE OF CONCRETE-FILLED STEEL TUBE PUMPING[J]. INDUSTRIAL CONSTRUCTION, 2009, 39(12): 98-101. doi: 10.13204/j.gyjz200912024

Citation:

Xie Jian, He Fei. OPTIMIZATION DESIGN ON THE ROOF OF LARGE LNG TANK[J]. INDUSTRIAL CONSTRUCTION, 2012, 42(4): 78-81,98. doi: 10.13204/j.gyjz201204017

Wang Xin, Yang Shirong, Feng Yonggang. THE ON-SITE TEST OF PUMPING PRESSURE OF CONCRETE-FILLED STEEL TUBE PUMPING[J]. INDUSTRIAL CONSTRUCTION, 2009, 39(12): 98-101. doi: 10.13204/j.gyjz200912024

Citation:

Xie Jian, He Fei. OPTIMIZATION DESIGN ON THE ROOF OF LARGE LNG TANK[J]. INDUSTRIAL CONSTRUCTION, 2012, 42(4): 78-81,98. doi: 10.13204/j.gyjz201204017

PDF( 0 KB)

OPTIMIZATION DESIGN ON THE ROOF OF LARGE LNG TANK

doi: 10.13204/j.gyjz201204017

Xie Jian^1,2,
He Fei¹

1.
1. School of Civil Engineering,Tianjin University,Tianjin 300072,China;
2.
2. Key Laboratory of Coast Civil Structure Safety(Tianjin University),Ministry of Education,Tianjin 300072,China

Received Date: 2011-10-31
Publish Date: 2012-04-20

Abstract

Abstract

The mechanical behavior of large pre-stressed concrete full containment LNG tank roof was analyzed. According to the existing project,the physical model of large pre-stressed concrete full containment LNG tank is established with finite element method (FEM). The geometry factors implicating the stress and deformation of the roof were considered during the phase of project design,including external tank diameter,curvature radius of the roof and the thickness of roof. By calculating the LNG tanks with different dimensions and contrasting the results,the optimal states of the geometry factors on stress and deformation are obtained,which provides suggestions on designing the large LNG tanks and lays a foundation for China' s independent design of large-size LNG tanks.
- LNG tanks,
- roof,
- FEM,
- pre-stressed concrete,
- optimization design

FullText(HTML)

References(9)

References

骆晓玲，齐长勇，程换新. 大型液化天然气储罐的发展研究[J]. 机械设计与制造，2009，1(9):255-257.

[2] Jeon S J. Basic Design for Large Above-Ground Tank[C]∥Proceeding of GASEX2002，2002.

[3] BS EN14620-1: Design and Manufacture of Site Built，Vertical，Cylindrical，Flat-Bottomed Steel Tanks for the Storage ofRefrigerated，Liquefied Gases with Operating Temperatures Between 0℃ and-165℃ Part1:General[S]. 2006.

[4] BS EN1992-1-1: Design of Concrete Structures-Part 1-1:General Rules and Rules for Buildings[S]. 2004.

[5] 邸国清. 16 万 m3 混凝土外罐施工要点[J]. 石油工程建设，2008，34(4):30-34.

[6] 黄淑女，王作乾. 我国第一座 16 万 m3 全容 LNG 储罐[J]. 石油工程建设，2009，35(4):15-17.

[7] 吕娜娜，谢剑，杨建江，等. 大型 LNG 低温储罐建造技术综述[J]. 特种结构，2010，27(1):105-108.

[8] 李建军. LNG 储罐的建造技术[J]. 焊接技术，2006，35(4):54-56.

[9] 王冰，陈学东，王国平. 大型低温 LNG 储罐设计与建造技术的新进展[J]. 天然气工业，2010，30(5):108-112.

Relative Articles

[1]	HUANG Xigui, LUO Shengchang, LI Lixiao. Research on Wind Speed Profile Characteristics of Typhoon Boundary Layer Based on Measured Data[J]. INDUSTRIAL CONSTRUCTION, 2024, 54(2): 98-105. doi: 10.3724/j.gyjzG23121101
[2]	QIU Bin, LEI Honggang, SHEN Yu, JI Xuanzhe. Fatigue Load Spectrum Research of the Grid Structure Under Suspension Crane Loading[J]. INDUSTRIAL CONSTRUCTION, 2023, 53(12): 143-151. doi: 10.13204/j.gyjzG21102408
[3]	CHEN Zhengfa, ZHANG Jie, YAN Zhiguo, BIAN Minghui. STUDY OF WATER AND EARTH PRESSURE MODES ON SHIELD TUNNELS IN WATER-RICH DIORITE STRATA[J]. INDUSTRIAL CONSTRUCTION, 2021, 51(7): 25-30. doi: 10.13204/j.gyjzG21031806
[4]	MA Yunlong, WANG Xiuli, FENG Zhujun, GOU Baolong, HOU Hongjie. RESEARCH ON STRENGTHENING DESIGN FOR JACKING OF A LONG-SPAN STEEL PLANT[J]. INDUSTRIAL CONSTRUCTION, 2021, 51(11): 205-210. doi: 10.13204/j.gyjzG21061602
[5]	LI Zhaoyang, PAN Xinzhong, YU Bo. NONLINEAR ANALYSIS AND FIELD TEST VERIFICATION OF STEEL TUBULAR SCAFFOLDS UNDER CONSTRUCTION[J]. INDUSTRIAL CONSTRUCTION, 2020, 50(9): 112-117. doi: 10.13204/j.gyjzG201904160007
[6]	Hu Changming, Liu Fengyun, Yang Jianhua, Zhao Yunbo, Ren Wenjun, Cai Suping. ON-SITE MEASUREMENT AND ANSYS ANALYSIS OF CANTILEVER[J]. INDUSTRIAL CONSTRUCTION, 2015, 45(4): 136-142. doi: 10.13204/j.gyjz201504026
[7]	Chen Xu. STUDY ON FIELD MEASUREMENT OF HIGH-FORMWORK WITH A HEIGHT OF 15 m[J]. INDUSTRIAL CONSTRUCTION, 2013, 43(8): 106-108. doi: 10.13204/j.gyjz201308023
[8]	Zheng Lianqiong, Cai Xuefeng, Zhuang Jinping, Zhou Jizhong, Tuo Mingbei. ON-SITE MEASUREMENT AND ANALYSIS OF SUPER HIGH OR LARGE-SPAN FORMWORK SUPPORT WITH FASTENER STEEL TUBE[J]. INDUSTRIAL CONSTRUCTION, 2013, 43(7): 96-100. doi: 10.13204/j.gyjz201307022
[9]	Zhuang Jinping, Cai Xuefeng, Lin Zengzhong, Zhou Jizhong, Lin Huaqiang. SITE MEASUREMENT AND DISCUSSION ON MODIFYING METHOD OF BEARING CAPACITY FORMULA OF SUPER HIGH OR LARGE-SPAN FORM STRUT SYSTEM[J]. INDUSTRIAL CONSTRUCTION, 2011, 41(9): 94-99. doi: 10.13204/j.gyjz201109021
[10]	Zhang Weixi, Chen Ping, Zhao Dong, Li Lingtong. THE DESIGN OF THE INTEGRAL LIFT-UP FOR THE CONSERVATION OF THE JADE EMPEROR PAVILION OF KAIFENG YANQING TAOIST TEMPLE[J]. INDUSTRIAL CONSTRUCTION, 2009, 39(12): 110-114. doi: 10.13204/j.gyjz200912027
[11]	Dai Beishan. ADJUSTMENT OF LARGE SLANTING STEEL COLUMN BY UPRISING METHOD[J]. INDUSTRIAL CONSTRUCTION, 2009, 39(12): 115-117. doi: 10.13204/j.gyjz200912028
[12]	Hu Wei-dong, Zhu Xin-nian, Xiao Si-xi, Chen Ji-guang. ESTABLISHMENT OF CURVE TO DETECT CONCRETE COMPRESSION STRENGTH WITH RESILIENCE METHOD FOR YUEYANG AREA[J]. INDUSTRIAL CONSTRUCTION, 2006, 36(4): 61-64. doi: 10.13204/j.gyjz200604018
[13]	Wang Yingge. FIELD TEST AND NUMERICAL ANALYSIS OF INTERACTION OF PILE- RAFT FOUNDATION ULTRA - HIGH TUBE-IN-TUBE STRUCTURE[J]. INDUSTRIAL CONSTRUCTION, 2005, 35(5): 10-15. doi: 10.13204/j.gyjz200505003