Citation: | LüFanren, Shao Hongcai, Jin Yaohua. EXPERIMENTAL STUDY ON BEARING CAPACITY COMPARISON BETWEEN SYMMETRIC DOUBLE GROUP PILES UNDER VERTICAL LOAD[J]. INDUSTRIAL CONSTRUCTION, 2012, 42(5): 102-105. doi: 10.13204/j.gyjz2011205019 |
Zhang L M,McVay M C,Lai P. Centrifuge Modelling of Laterally Loaded Single Battered Piles in Sands[J]. Canadian Geotechnical Journal,1999,36(6):1074-1084.
|
[2] Lv Fanren,Yin Jiming,Jin Yaohua,et al. Study on Lateral Bearing Capacity of Batter Pile Under Different Constraints at Pile Head by Model Experiments [C]∥ Key Technologies of Railway Engineering High-Speed RailwayHeavy Haul and Urban Rail Transit. Beijing:China Railway Publishing House,2010: 533-536.
|
[3] Lv Fanren,Yin Jiming,Jin Yaohua. Study on Load-Displacement of Batter Pile Under Vertical Load by Model Experiments [C]∥ International Conference on Electric Technology and Civil Engineering. 2011,4:3506-3509.
|
[4] 郑刚,王丽. 竖向荷载作用下倾斜桩的荷载传递性状及承载力研究[J]. 岩土工程学报,2008,30(3):323-330.
|
[5] 郑震. 大水平力作用下群桩基础计算[J]. 工业建筑,2007,37(增刊):810-812.
|
[6] 赵学勤,李达祥,王安玲,等. 组合斜孔桩变形机理的试验研究[C]∥中国土木工程学会第三届土力学及基础工程学术会议论文集. 北京:中国建筑工业出版社,1981.
|
[7] 靳彩,赵瑜,李凤兰,等. 送电线路铁塔复合式斜桩基础试验 研究[J]. 工业建筑,2001,31(9):45-47,60.
|
[8] 姜春林,高永涛. 倾角对复合锚固桩水平承载力影响浅析[J]. 交通科技,2007,(6):37-40.
|
[9] Kitiyodom P,Matsumoto T. A Simplified Analysis Method for Piled Raft and Pile Group Foundations with Batter Piles[J]. International Journal for Numerical and Analytical Methods in Geomechanics,2002,26:1349-1369.
|
[10] 刘杰伟,王兴斌,潘健,等. 桩群中设置斜桩对其工作性质影响的研究[J]. 昆明理工大学学报:工学版,2008,33(1):56-59.
|
[11] Quang T S,Ghazi H,Patrick D B. A Three-Phase Model for Evaluating the Seismic Resistance of Soils Reinforced by a Network of Symmetrically Inclined Piles[J]. Computers and Geotechnics,2010,37(4):545-554.
|
[12] Escoffier S,Chazelas J L,Garnier J,Centrifuge Modeling of Raked Piles[J]. Bulletin of Earthquake Engineering,2008(6): 689-704.
|
[13] Gerolymos N,Giannakou A,Anastasopoulos I,et al. Evidence of Beneficial Role of Inclined Piles: Observations and Summary of Numerical Analyses[J]. Bulletin of Earthquake Engineering,2008(6):705-722.
|