EXPERIMENTAL RESEARCH ON THE BENDING RESISTANCE OF THE SELF-COMPACTING CONCRETE BEAM

Meng Zhiliang; Sun Jianheng; Wang Guodong

doi:10.13204/j.gyjz201101023

Volume 41 Issue 1

Dec. 2014

Turn off MathJax

Article Contents

Abstract

References

Article Navigation > INDUSTRIAL CONSTRUCTION > 2011 > 41(1): 97-100,129

Meng Zhiliang, Sun Jianheng, Wang Guodong. EXPERIMENTAL RESEARCH ON THE BENDING RESISTANCE OF THE SELF-COMPACTING CONCRETE BEAM[J]. INDUSTRIAL CONSTRUCTION, 2011, 41(1): 97-100,129. doi: 10.13204/j.gyjz201101023

Citation:

Meng Zhiliang, Sun Jianheng, Wang Guodong. EXPERIMENTAL RESEARCH ON THE BENDING RESISTANCE OF THE SELF-COMPACTING CONCRETE BEAM[J]. INDUSTRIAL CONSTRUCTION, 2011, 41(1): 97-100,129. doi: 10.13204/j.gyjz201101023

Citation:

PDF( 0 KB)

EXPERIMENTAL RESEARCH ON THE BENDING RESISTANCE OF THE SELF-COMPACTING CONCRETE BEAM

doi: 10.13204/j.gyjz201101023

1.
1. College of Materials Science and Engineering,Chongqing University,Chongqing 400045,China;
2.
2. College of Urban and Rural Construction,Agricultural University of Hebei,Baoding 071001,China;
3.
3. North Design &Research Institute,Shijiazhuang 050011,China

Received Date: 2010-01-18
Publish Date: 2011-01-20

Abstract

Abstract

Six self-compacting concrete beams and two corresponding ordinary concrete beams of two different strength grades were used to study anti-bending properties of concrete freely supported beams.The results show: 1)the mean of the experimental data of ultimate load of self-compacting concrete beams is close to that of corresponding ordinary concrete beams,and is higher than its theoretical value;2) the loading-deflection curves,the crack development and the failure mode of the two kinds of beams are basically the same;3) the average strain along section height of self-compacting concrete beams can fit with the assumption of plane section basically.Therefore,it is reasonable and safe to design the self-compacting concrete beams according to the theory of ordinary concrete.
- self-compacting concrete,
- ultimate load,
- load-deflection curve,
- failure mode