Citation: | Cai Xiaoning, Meng Shaoping, Chen Jiajia, Sun Weiwei. STUDY ON THE BEHAVIORS OF PRESTRESSED PRECAST HYBRID SHORT-SHEAR WALLS[J]. INDUSTRIAL CONSTRUCTION, 2011, 41(1): 73-76,92. doi: 10.13204/j.gyjz201101018 |
[2] Kurama Y, Pessiki S, Sause R, et al.Seismic Behavior and Designof Unbonded Post-Tensioned Precast Concrete Walls [J].PCIJournal, 1999, 44(3):72-89.
|
Priestley M J N.The PRESSS Program-Current Status and ProposedPlans for Phase Ⅲ[J].PCI Journal, 2000, 42(2):22-40
|
[3] Shen Qiang.Kurama Y C , Weldon B D.Seismic Design andAnalytical Modeling of Posttensioned Hybrid Coupled WallSubassemblages[J].Journal of Structural Engineering, 2006, 132(7):1030-1040.
|
[4] Weldon B D, Kurama Y C .Nonlinear Behavior of Precast ConcreteCoupling Beams Under Lateral Loads[J].Journal of StructuralEngineering, 2007, 133(11):1571-1581.
|
[5] Prakash V, Powell G H, Campbell S.DRAIN-2DX Base ProgramDescription and User Guide:Ver1.10[R].Technical ReportUCB /SEMM-93/17.Berkeley:Department of Civil University ofCalifornia, 1993.
|
[6] Pampanin S, Priestley M J P, Sritharan S.Analytical Modeling ofSeismic Behavior of Precast Concrete Frames Designed with DuctileConnections[J].Journal of Earthquake Engineering, 2001, 5(3):329-367.
|
[7] EI-Sheikh M, Pessiki S, Sause R, et al.Monment Rotation Behaviorof Unbonded Post-Tensioned Precast Concrete Beam-ColumnConnections[J].ACI Structural Journal, 2000, 91(1):122-132.
|
[8] 孙巍巍, 孟少平, 吴京.后张无粘结预应力混合装配式短肢剪力墙静力弹塑性分析[J].工程抗震与加固改造, 2007, 29(5):36-38.
|
[9] 孙巍巍.后张无粘结预应力装配式短肢剪力墙抗震能力及设计方法研究[D].南京:东南大学, 2007.
|
[10] Mander J B, Pridstldy M J N, Park R.Theoretical Stress-StrainModel for Confined Concrete [J].Journal of the StructuralDivision, ASCE, 1988, 114(8):1804-1826.
|
[11] GB 500102002混凝土结构设计规范[S].
|
[12] Kurama Y C , Shen Q.Posttensioned Hybrid Coupled Walls UnderLateral Loads[J].Journal of Structural Engineering, 2004, 130(2):297-309.
|
[13] 蔡小宁, 孟少平, 孙巍巍.后张无粘结预应力装配式短肢墙破坏形态研究[J].工程抗震与加固改造, 2009, 31(1):70-73.
|
[14] Canadian Standards Association (CSA ).Design of ConcreteStructures for Buildings Canda[S].1994.
|