EFFECT OF LONGITUDINAL REINFORCEMENT RATIO ON SHEAR STRENGTH OF REINFORCED CONCRETE BEAMS

Yang Zhuoqi; Luo Lin; Wang Qizhi

doi:10.13204/j.gyjz201009023

Volume 40 Issue 9

Dec. 2014

Turn off MathJax

Article Contents

Abstract

References

Article Navigation > INDUSTRIAL CONSTRUCTION > 2010 > 40(9): 88-81,96

Yang Junjie, Yao Zhishu. TESTING RESEARCH ON THE STRUCTURAL CHARACTERISTICS OF A TYPE OF STEEL STRUCTURE OF COMPRESSIBLE LINING JOINT FOR SHAFTS[J]. INDUSTRIAL CONSTRUCTION, 2004, 34(2): 41-44,36. doi: 10.13204/j.gyjz200402013

Citation:

Yang Zhuoqi, Luo Lin, Wang Qizhi. EFFECT OF LONGITUDINAL REINFORCEMENT RATIO ON SHEAR STRENGTH OF REINFORCED CONCRETE BEAMS[J]. INDUSTRIAL CONSTRUCTION, 2010, 40(9): 88-81,96. doi: 10.13204/j.gyjz201009023

Citation:

PDF( 0 KB)

EFFECT OF LONGITUDINAL REINFORCEMENT RATIO ON SHEAR STRENGTH OF REINFORCED CONCRETE BEAMS

doi: 10.13204/j.gyjz201009023

1.
Department of Civil Engineering and Applied mechanic,Sichuan University,Chengdu 610065,China

Received Date: 2009-11-15
Publish Date: 2010-09-20

Abstract

Abstract

The parameters influencing the shear strength of reinforced concrete beams are various,the test data used to study the effect of longitudinal reinforcement ratio alone on shear strength of the beams is inadequate and biased although the whole database is large.With the data filtering algorithm the comprehensive shear strength test data from current literatures of reinforced concrete rectangular section beams without stirrups under concentrated load are filtered,and then the influence of data missing,bias and other parameters is minimized.So the law of the effect of longitudinal reinforcement ratio on the beam shear strength is derived,and with consideration of the effect of longitudinal reinforcement ratio the shear strength formula of reinforced concrete beams without stirrups is presented.
- reinforced concrete beams without stirrups,
- concentrated load,
- longitudinal reinforcement ratio,
- shear strength,
- code

FullText(HTML)

References(16)

References

[2] Kani G N J.Basic Facts Concerning Shear Failure[J].ACIStructural Journal，1966(6): 675-690.

Moody K G，Viest I M，Elstner R C，et al.Shear Strength ofReinforced Concrete Beams，Part 1Test of Simple Beams[J].ACI Structural Journal，1954: 317-332.

[3] Rajagopalan K S， Ferguson M.Exploratory Shear TestsEmphasizing Percentage of Longitudinal Steel[J].ACI StructuralJournal，1968(8): 634-638.

[4] Batchelor B D，Kwun M.Shear in RC Beams Without WebReinforcement[J].ASCE Journal of the Structural Division，1981，107(5): 907-921.

[5] Tompos E J，Frosch R J.Influence of Beam Size，LongitudinalReinforcement， and Stirrup Effectiveness on Concrete ShearStrength[J].ACI Structural Journal，2002，99(5): 559-567.

[6] Reineck K H，Kuchma D A，Kim K S，et al.Shear Database forReinforced Concrete Members Without Shear Reinforcement[J].ACI Structural Journal，2003，100(2): 240-249.

[7] Bazant Z P，Sun H H.Size Effect in Diagonal Shear Failure:Influence of Aggregate Size and Stirrups [J].ACI MaterialsJournal，1987，84(4):259-272.

[8] Bazant Z P，Yu Q.Designing Against Size Effect on ShearStrength of Reinforced Concrete Beams Without Stirrups:Verification and Calibration [J].ASCE Journal of StructuralEngineering，2005，131(12): 1886-1897.

[9] Bazant Z P，Yu Q.Minimizing Statistical Bias to Identify SizeEffect from Beam Shear Database[J].ACI Structural Journal，2008，105(6): 685-691.

[10] Collins M P，Bentz E C，Sherwood E G.Where is ShearReinforcement Required Review of Research Results and DesignProcedures[J].ACI Structural Journal，2008，105 (5): 590 －600.

[11] GB 500102002 混凝土结构设计规范[S].

[12] ACI Committee 318.Building Code Requirements for StructuralConcrete and Commentary[S].

[13] 施岚青，徐有邻.钢筋混凝土受弯构件的剪切强度控制区及其下包线[J].建筑结构学报，1983(5):23-34.

[14] 杨恩建.不同纵筋率对剪跨比为2.5 的无腹筋约束梁受剪性能影响的研究[D].重庆:重庆大学，2005.

[15] 赵国藩.高等钢筋混凝土结构学[M].北京:机械工业出版社，2005.

[16] 贡金鑫，魏巍巍，胡家顺.中美欧混凝土结构设计[M].北京:中国建筑工业出版社，2007.

Relative Articles

[1]	ZHU Xiaojun, HE Zhenyu. Experimental Study on the Mechanical Characteristics of Piled Rafts Under Vertical-Horizontal Combined Loads[J]. INDUSTRIAL CONSTRUCTION, 2022, 52(5): 179-186. doi: 10.13204/j.gyjzG21012103
[2]	SHI Kairong, PAN Wenzhi, JIANG Zhengrong, LYU Junfeng, LU Yonghui. Research on Shear Properties of Spherical Hinged Supports of a Complex Large-Scale Steel Structure Subjected to Axial Compressive Loads[J]. INDUSTRIAL CONSTRUCTION, 2022, 52(3): 141-145. doi: 10.13204/j.gyjzG20103102
[3]	Xie Weizhi, Deng Jun, Li Song. TENSILE BEARING CAPACITY OF STEEL-CFRP STRAP JOINTS UNDER DRY-WET CYCLES[J]. INDUSTRIAL CONSTRUCTION, 2015, 45(6): 27-30. doi: 10.13204/j.gyjz201506006
[4]	Xiao Yan, Feng Li, LüXiaohong, She Liyong, Shen Yali. EXPERIMENTAL STUDIES OF GLUBAM COLUMNS UNDER AXIAL LOADS[J]. INDUSTRIAL CONSTRUCTION, 2015, 45(4): 13-17. doi: 10.13204/j.gyjz201504003
[5]	Wu Jianqing, Zhang Chonggao, Song Xiuguang, Zhang Hongbo. A MODEL TEST STUDY OF MECHANICAL BEHAVIOR FOR THE DISPERSED PRESSURE RETAINING WALL[J]. INDUSTRIAL CONSTRUCTION, 2014, 44(09): 83-87.
[6]	Shi Gang, Zhang Jianxing. FATIGUE TEST OF HIGH STRENGTH STEEL Q460D[J]. INDUSTRIAL CONSTRUCTION, 2014, 44(03): 6-10. doi: 10.13204/j.gyjz201403004
[7]	Liu Xuechun, Xu Axin, Zhang Ailin, Ma Jing, Cao Ming, Hui Yi, Zhao Yue. THE STATIC PERFORMANCE ANALYSIS AND EXPERIMENTAL RESEARCH OF THE JOINT IN MODULAR PREFABRICATED HIGH-RISE STEEL STRUCTURE[J]. INDUSTRIAL CONSTRUCTION, 2014, 44(08): 27-34.
[8]	Sun Hongpeng. APPLICATION OF THE CHINESE AND AMERICAN CODES IN DESIGN OF BOILER STEEL STRUCTURES FOR ELECTRIC POWER STATION[J]. INDUSTRIAL CONSTRUCTION, 2013, 43(2): 138-142. doi: 10.13204/j.gyjz201302028
[9]	Zhang Zhi-hao, Zhang Hui-le, Han Xiao-meng. OPTIMIZATION ANALYSIS OF INDOOR MODEL TEST SCHEME FOR ROCK-SOCKED FOUNDATION PILE IN KARST AREA[J]. INDUSTRIAL CONSTRUCTION, 2012, 42(9): 84-89. doi: 10.13204/j.gyjz201209019
[10]	LüFanren, Shao Hongcai, Jin Yaohua. EXPERIMENTAL STUDY ON BEARING CAPACITY COMPARISON BETWEEN SYMMETRIC DOUBLE GROUP PILES UNDER VERTICAL LOAD[J]. INDUSTRIAL CONSTRUCTION, 2012, 42(5): 102-105. doi: 10.13204/j.gyjz2011205019
[11]	Huang Dan, Hou Lei, Cai Jian. EXPERIMENTAL RESEARCH ON STEEL-WORKSHOP COLUMN WITH WEB OPENING[J]. INDUSTRIAL CONSTRUCTION, 2012, 42(3): 128-132,42. doi: 10.13204/j.gyjz201203027
[12]	Zhang Huile, Liu Zhong, Zhao Yanfei, Liu Jianguo. PULL-OUT MODEL TEST ON TENSION UNDERREAMED ANCHOR[J]. INDUSTRIAL CONSTRUCTION, 2011, 41(2): 49-52. doi: 10.13204/j.gyjz201102013
[13]	Qiang Xiaojun, Wan Changhong, Jiang Huihuang. ANALYSIS AND COMPARISON OF MODEL TEST REINFORCED EMBANKMENT BY PILE NET WITH PILE CAP[J]. INDUSTRIAL CONSTRUCTION, 2009, 39(5): 75-80. doi: 10.13204/j.gyjz200905016
[14]	Li Chuanxun, Xie Kanghe, Lu Mengmeng, Yu Kun. THE CRITICAL EDGE LOAD OF COMPOSITE GROUND REINFORCED BY STONE COLUMNS UNDER RIGID FOUNDATION[J]. INDUSTRIAL CONSTRUCTION, 2009, 39(10): 62-66. doi: 10.13204/j.gyjz200910016
[15]	Zheng Zequn, Fang Zhenzheng, Chen Hongyuan. PLEXIGLASS MODEL TEST OF OPEN-SPANDREL RIGID ARCH BRIDGE[J]. INDUSTRIAL CONSTRUCTION, 2008, 38(6): 43-47. doi: 10.13204/j.gyjz200806013
[16]	He Jie, Liu Jie, Chen Keliang, Min Changqing. EXPERIMENT OF COMPACTING EFFECTS OF STATIC PILING IN CLAY GROUND WITH TAPERED PILE[J]. INDUSTRIAL CONSTRUCTION, 2008, 38(1): 74-75,109. doi: 10.13204/j.gyjz200801018
[17]	Liu Jingsong, Qiu Tao, Wang Cuikun, Liu Junjin. SHAKING TABLE EXPERIMENTAL STUDY ON AN IRREGULAR TALL BUILDING STRUCTURE[J]. INDUSTRIAL CONSTRUCTION, 2008, 38(7): 30-33. doi: 10.13204/j.gyjz200807007
[18]	Qin Jie, Shen Shi-zhao. CONSTRUCTION TECHNOLOGY AND EXPERIMENTAL STUDY ON PRESTRESSED CABLE ARCH STRUCTURES[J]. INDUSTRIAL CONSTRUCTION, 2006, 36(5): 91-94. doi: 10.13204/j.gyjz200605024
[19]	Liao Xinjun, Wang Yuanqing, Shi Yongjiu, Chen Hong. STRENGTHENING DESIGN OF LIGHT-WEIGHT STEEL MILL BUILDING WITH PORTAL FRAMES ARISED FROM INCREASED LOADING[J]. INDUSTRIAL CONSTRUCTION, 2005, 35(2): 93-95. doi: 10.13204/j.gyjz200502025
[20]	Chen Yiyi, Tian Hai, Chen Yangji. EXPERIMENTAL RESEARCH ON STEEL ROOF MAIN TRUSS OF NEW TERMINAL BUILDING IN CHONGQING JIANGBEI AIRPORT[J]. INDUSTRIAL CONSTRUCTION, 2004, 34(12): 27-31. doi: 10.13204/j.gyjz200412007