RESEARCH ON FATIGUE LIFE OF CFST ARCH BRIDGE TUBULAR JOINTS BASED ON THE METHOD OF NATURAL FLAW

Zhang Jiayuan; Fan Wenli; Ding Wangxing; Ai Zhineng

doi:10.13204/j.gyjz200901028

Volume 39 Issue 1

Dec. 2014

Turn off MathJax

Article Contents

Abstract

References

Article Navigation > INDUSTRIAL CONSTRUCTION > 2009 > 39(1): 128-130,137

Zhang Jiayuan, Fan Wenli, Ding Wangxing, Ai Zhineng. RESEARCH ON FATIGUE LIFE OF CFST ARCH BRIDGE TUBULAR JOINTS BASED ON THE METHOD OF NATURAL FLAW[J]. INDUSTRIAL CONSTRUCTION, 2009, 39(1): 128-130,137. doi: 10.13204/j.gyjz200901028

Citation:

Zhang Jiayuan, Fan Wenli, Ding Wangxing, Ai Zhineng. RESEARCH ON FATIGUE LIFE OF CFST ARCH BRIDGE TUBULAR JOINTS BASED ON THE METHOD OF NATURAL FLAW[J]. INDUSTRIAL CONSTRUCTION, 2009, 39(1): 128-130,137. doi: 10.13204/j.gyjz200901028

Citation:

PDF( 0 KB)

RESEARCH ON FATIGUE LIFE OF CFST ARCH BRIDGE TUBULAR JOINTS BASED ON THE METHOD OF NATURAL FLAW

doi: 10.13204/j.gyjz200901028

1.
1. Communication Planning and Design Institute of Hubei Province,Wuhan 430051,China;
2.
2. School of Civil Engineering,Southwest Jiaotong University,Chengdu 610031,China;
3.
3. The Second Railway Survey &Design Institute,Chengdu 610031,China

Received Date: 2007-10-20
Publish Date: 2009-01-20

Abstract

Abstract

It is compured the fatigue failure mode of concrete- filled steel tube(CFST) joint to that of hollow tube joint using model test, it is known that there is a basic agreement between the two. It is also proposed a way of predicting the fatigue life of CFST arch bridge tubular joints based on the method of natural flaw. And the rationality of the method in a certain range is verified by a real example.
- concrete-filled steel tube(CFST),
- tubular joints,
- fatigue life,
- the method of natural flaw,
- fracture mechanics

FullText(HTML)

References(11)

References

[2] 范文理. 管结构节点疲劳设计[C]. 第十四届全国桥梁学术会议论文集. 南京: 2000.

张家元, 钢管混凝土拱桥管- 板节点承载力试验研究[D].: [硕士学位论文] . 重庆: 重庆交通大学, 2006.

[3] Chang E, DoverW D. Stress Concentration Fact ors Parametric Equat ions for Tubular X and DT Joint[J]. International Journal of Fat igue, 1996, 18(6): 363-387.

[4] Chiew S P, Soh C K, Fung T C, et al . Numerical Study of Multiplanar Tubular DX-joints Subject to Axial Loads [J]. Computers and Structures, 1999, 72(6): 749-761.

[5] Radaj D, Sonsino C M, Flade D. Prediction of Service Fat igue Strength of aWelded Tubular Joint on the Basis of the Notch Strain Approach[J]. Int ernational Journal of Fatigue, 1998, 20(6): 471-480.

[6] Bowness D, Lee M M K. Fatigue Crack Curvature Under theWeld Toe in an Offshore Tubular Joints [J]. International Journal of Fatigue. 1998, 20(6): 481-490.

[7] 拉达伊D. 焊接结构疲劳强度[M]. 郑朝云, 张式程, 译. 北京: 科学出版社, 1993.

[8] 郑学祥. 船舶及海洋工程结构的断裂与疲劳分析 M] . 北京: 海洋出版社, 1988.

[9] GB 50017- 2003 钢结构设计规范[S].

[10] 钢结构的疲劳设计规范[M]. 西北工业大学, 铁道部科学研究院, 译. 西安: 西北工业大学出版社, 1989.

[11] 格尔内T R. 焊接结构的疲劳[M]. 周殿群, 译. 北京: 机械工业出版社, 1988

Relative Articles

Supplements(0)

Cited By

Proportional views