THE DESIGN OF REINFORCEMENT AND REBUILDING OF A HOSPITAL IN SOFT SOIL AREA

Wen Li-ming; Shi Hong-xiang; Chen Zhao-huang

doi:10.13204/j.gyjz200610027

Volume 36 Issue 10

Dec. 2014

Turn off MathJax

Article Contents

Abstract

References

Article Navigation > INDUSTRIAL CONSTRUCTION > 2006 > 36(10): 97-100

Wen Li-ming, Shi Hong-xiang, Chen Zhao-huang. THE DESIGN OF REINFORCEMENT AND REBUILDING OF A HOSPITAL IN SOFT SOIL AREA[J]. INDUSTRIAL CONSTRUCTION, 2006, 36(10): 97-100. doi: 10.13204/j.gyjz200610027

Citation:

Wen Li-ming, Shi Hong-xiang, Chen Zhao-huang. THE DESIGN OF REINFORCEMENT AND REBUILDING OF A HOSPITAL IN SOFT SOIL AREA[J]. INDUSTRIAL CONSTRUCTION, 2006, 36(10): 97-100. doi: 10.13204/j.gyjz200610027

Citation:

PDF( 0 KB)

THE DESIGN OF REINFORCEMENT AND REBUILDING OF A HOSPITAL IN SOFT SOIL AREA

doi: 10.13204/j.gyjz200610027

1.
1 Shanghai Health Construction Design &Research Institute Shanghai 200003;
2.
2 The Design and Research Institute of Huaqiao University Quanzhou 362011

Received Date: 2006-03-20
Publish Date: 2006-10-20

Abstract

Abstract

It is introduced the deisgn of reinforcement and rebuilding of an old sickroom adding iatrical elevator in soft soil area, some logical structural measures were used to deal with the affiliation between the old building and the new building in this design, some successful experience may be used for similar rebuilding projects in the future.
- soft soil ground,
- rebuilding of old building,
- sedimentation,
- reinforcement,
- anchoring pile

FullText(HTML)

References(6)

References

JGJ 116-98 建筑抗震加固技术规程

张熙光, 王骏孙, 刘惠珊. 建筑抗震鉴定加固手册. 北京: 中国建筑工业出版社, 2001

谢慧才, 罗苓隆, 赵晓华, 等. 建筑物鉴定与加固改造第五届全国学术讨论会论文集(上册). 汕头: 汕头大学出版社, 2000

DGJ 08-11-1999 地基基础设计规范

GB 50007-2002 建筑地基基础设计规范

JGJ 79-2002 建筑地基处理技术规范

Relative Articles

[2]	Sheng Jiding, Li Bo, Li Yedong. SOME PROBLEMS FOR DESIGN OF DYNAMIC MACHINE FOUNDATION[J]. INDUSTRIAL CONSTRUCTION, 2014, 44(06): 1-6. doi: 10.13204/j.gyjz201406001
[3]	Li Bo, Sheng Jiding, Liu Peng. SOME DESIGN PROBLEMS OF TANK FLEXIBLE FOUNDATION[J]. INDUSTRIAL CONSTRUCTION, 2014, 44(06): 18-21. doi: 10.13204/j.gyjz201406005