INITIAL ROTATION STIFFNESS CALCULATION OF SEMI-RIGID COMPOSITE JOINTS

Hu Xiamin; Guo Yiqing; Liu Jianping

doi:10.13204/j.gyjz200403022

Volume 34 Issue 3

Dec. 2014

Turn off MathJax

Article Contents

Abstract

References

Article Navigation > INDUSTRIAL CONSTRUCTION > 2004 > 34(3): 71-73

Tian Jianbo, Han Xiaolei, Liu Jiangyuan. LARGE-SCALE SIMPLE SHEAR TEST ON MECHANICAL PROPERTIES OF INTERFACE BETWEEN SANDY SOIL AND CONCRETE FACE[J]. INDUSTRIAL CONSTRUCTION, 2012, 42(7): 110-114. doi: 10.13204/j.gyjz201207018

Citation:

Hu Xiamin, Guo Yiqing, Liu Jianping. INITIAL ROTATION STIFFNESS CALCULATION OF SEMI-RIGID COMPOSITE JOINTS[J]. INDUSTRIAL CONSTRUCTION, 2004, 34(3): 71-73. doi: 10.13204/j.gyjz200403022

Citation:

Hu Xiamin, Guo Yiqing, Liu Jianping. INITIAL ROTATION STIFFNESS CALCULATION OF SEMI-RIGID COMPOSITE JOINTS[J]. INDUSTRIAL CONSTRUCTION, 2004, 34(3): 71-73. doi: 10.13204/j.gyjz200403022

PDF( 0 KB)

INITIAL ROTATION STIFFNESS CALCULATION OF SEMI-RIGID COMPOSITE JOINTS

doi: 10.13204/j.gyjz200403022

1.
1. Institute of Civil Engineering,Nanjing University of Technology Nanjing 210009;
2.
2. Nanjing Dadi Construction Group Co. Nanjing 210000

Received Date: 2003-11-29
Publish Date: 2004-03-20

Abstract

Abstract

In the design of the steel-concrete composite frames, initial rotation stiffness needs to be determined, for elastic analysis and serviceability calculation. In this paper, a calculation method of initial rotation stiffness of semi-rigid steel-concrete composite joints is introduced, whose results are comparied with the test results.
- composite structure,
- semi-rigid joints,
- initial rotation stiffness

FullText(HTML)

References(11)

References

Johnson R P. Composite Structures of Steel and Concrete(Volume 1). London:Blackwell Scientific Publications, 1994

[2] 高华杰.支托型半刚性组合框架节点受力性能试验研究:[硕士学位论文].南京:南京工业大学, 2002

[3] 过轶青.端板型半刚性钢-混凝土组合节点的试验研究:[硕士学位论文].南京:南京工业大学, 2003

[4] Jaspart J P. Ideation of Moment-Rotation Curves for Structural Joints. Theories und Paraxis im Konstruktive Ingenieurbau, 1999:456～475

[5] Eurocode No.4. Composite Steel Concrete Structures, Report EUR 9886. Commission of the European Communities, 1985

[6] CEN(European Committee for Standardization). ENV 1994-1-1 Eurocede 4:Part 1.1. Design of Composite Steel and Concrete Structures:General Rules and Rules for Buildings.1992

[7] Christoph Odenbreit. Zur Ermittlung der Tragfhigkeiten, der Steifigkeiten und der Schnittgroeen von Verbundtrgern mit Halbsteifen Teiltragfhigen Verbundanschlen:[Dissertation]. Kaiserslautern:1999

[8] Joint Committee IABSE/CEB/FIT/ECCS.Composite Structures(Model Code). London:Construction Press, 1981

[9] Bode H, Kronenberger H J, Schmackpfeffer H. Teiltragfhige, Verformbare Verbindungen im Stahlverbundbau. In:Abschlubericht zu Teilprojekt 2 der DFG-Forschergruppe Verbundbau. Kaiserslautern:1999

[10] Kindmann R, Kathage K. Experimentelle Untersuchungen zur Rotationskapazitt von Verbundanschlssen. Stahlbau, 1994, 63(10):319～328

[11] Aribert J M, Lachal A. Experimental Investigation of Composite Connections and Global Interpretation.Institute National des Sciences Appliquees-Renns, 1992

Relative Articles

[1]	ZOU Kongqing, LIU Guo, WU Yibing, DING Shihong, SONG Zhifeng. MECHANICAL ANALYSIS OF THE INTEGRAL LIFTING PROCESS FOR A LONG-SPAN AND COMPLEX ASSEMBLED STEEL ROOF[J]. INDUSTRIAL CONSTRUCTION, 2021, 51(5): 124-130,138. doi: 10.13204/j.gyjzG201906170007
[2]	TIAN Shiyu, REN Fengming, CHEN Guangming. BEAM-TO-COLUMN JOINT OF NEW STRUCTURES INCORPORATING FRP: CURRENT STATUS AND PROSPECTS[J]. INDUSTRIAL CONSTRUCTION, 2021, 51(6): 186-197. doi: 10.13204/j.gyjzG20062905
[3]	WANG Xiaobi, SONG Ruinian, ZHAN Yulin, ZHAO Renda. EFFECT OF WELD SHAPE ON SHEAR BEARING CAPACITY OF STUD[J]. INDUSTRIAL CONSTRUCTION, 2020, 50(12): 144-149,185. doi: 10.13204/j.gyjzG1904020007
[4]	LI, Zongkai. DISCUSSIONS ON THE ISSUES FOR THE FRAME JOINT DESIGN OF COMPOSITE STRUCTURE OF METRO DEPOT PROJECT[J]. INDUSTRIAL CONSTRUCTION, 2020, 50(1): 99-108. doi: 10.13204/j.gyjz202001017
[7]	Lu Xinying, Li Yang, Li Yuanjin. STUDY OF GALVANIC CORROSION SENSITIVITY BETWEEN ANY COUPLE OF STUD，WELDMENT，OR BEAM[J]. INDUSTRIAL CONSTRUCTION, 2015, 45(8): 125-128. doi: 10.13204/j.gyjz201508023
[8]	Hu Changming, Liu Fengyun, Yang Jianhua, Zhao Yunbo, Ren Wenjun, Cai Suping. ON-SITE MEASUREMENT AND ANSYS ANALYSIS OF CANTILEVER[J]. INDUSTRIAL CONSTRUCTION, 2015, 45(4): 136-142. doi: 10.13204/j.gyjz201504026
[9]	Lu Xinying Lam Chio Fan Jiansheng, . CORROSION DETECTION OF STUDS IN STEEL-CONCRETE COMPOSITE STRUCTURES BY HALF-CELL POTENTIAL TEST[J]. INDUSTRIAL CONSTRUCTION, 2015, 45(7): 122-125. doi: 10.13204/j.gyjz201507025
[10]	Zhou Tao, Wang Jianguo, Wan Haiying. EXPERIMENTAL STUDY ON MECHANICAL BEHAVIOR OF THE BEAM-COLUMN SEMI-RIGID JOINT OF THE CONCRETE-FILLED SQUARE TUBE[J]. INDUSTRIAL CONSTRUCTION, 2014, 44(03): 147-149. doi: 10.13204/j.gyjz201403029
[11]	Guan Hong-bo, Wang Qing-xiang. CALCULATION OF BEARING CAPACITY OF ECCENTRICALLY LOADED CONCRETE-FILLED GFRP TUBULAR LONG COLUMNS[J]. INDUSTRIAL CONSTRUCTION, 2012, 42(10): 42-46. doi: 10.13204/j.gyjz201210011
[12]	Li Yan, Hao Jiping, Zhou Qi, Xie Qi, Guo Hongchao. SEMI-RIGIDITY AND INITIAL STIFFNESS OF UNSTIFFENED SINGLESIDED BOLTED-WELDED CONNECTION OF STEEL MOMENT FRAME[J]. INDUSTRIAL CONSTRUCTION, 2011, 41(9): 120-123,75. doi: 10.13204/j.gyjz201109027
[13]	Li Yan, Hao Jiping, Zhou Qi, Xie Qi, Guo Hongchao. EXPERIMENTAL STUDY AND FINITE ELEMENT ANALYSIS OF STEEL PLATE SHEAR WALL WITH UNSTIFFENED WELDED-BOLTED CONNECTIONS[J]. INDUSTRIAL CONSTRUCTION, 2011, 41(7): 101-106,100. doi: 10.13204/j.gyjz201107023
[14]	Li Qiang, Hao Jiping. ANALYSIS OF ULTIMATE CAPACITY OF STRESSED-SKIN FOR ALUMINUM ALLOY STRUCTURE WITH SEMI-RIGID CONNECTIONS[J]. INDUSTRIAL CONSTRUCTION, 2011, 41(5): 116-119,9. doi: 10.13204/j.gyjz201105026
[15]	Zeng Bin, LüZhitao. APPLICATION STUDY OF STEEL-CONCRETE-PRESTRESSED LONG CANTILEVER COMPOSITE STRUCTURES[J]. INDUSTRIAL CONSTRUCTION, 2010, 40(12): 84-86,15. doi: 10.13204/j.gyjz201012021
[16]	Zeng Jing, Fan Jian-sheng. THE RESEARCH AND APPLICATION OF DOUBLE SKIN COMPOSITE STRUCTURE[J]. INDUSTRIAL CONSTRUCTION, 2007, 37(4): 77-80. doi: 10.13204/j.gyjz200704021
[17]	Ji Bohai, Yang Ming. STATIC CYCLIC-LOADING TEST ON RIGID CONNECTION OF STEEL GIRDER COMBINED WITH ARTICULATED BEAM AND CONCRETE PIER[J]. INDUSTRIAL CONSTRUCTION, 2005, 35(11): 14-16. doi: 10.13204/j.gyjz200511004
[18]	Wang Yan. ANALYSIS ON PRYING FORCE OF SEMI-RIGID BEAM-COLUMN CONNECTIONS OF STEEL STRUCTURE[J]. INDUSTRIAL CONSTRUCTION, 2004, 34(7): 70-72. doi: 10.13204/j.gyjz200407020
[19]	Chen Lianmeng, Zhuang Yizhou, Zhu Hanya. APPLICATION AND ELASTOPLASTIC CALCULATION THEORY OF BENDING COMPONENT FOR PRESTRESSED CONCRETE-FILLED STEEL TUBE STRUCTURE[J]. INDUSTRIAL CONSTRUCTION, 2004, 34(2): 56-58,87. doi: 10.13204/j.gyjz200402017
[20]	Nie Jianguo, Zhao Nan, Chen Zhiqiang, Zhang Guibiao, Wu Daowen, Xiao Yan. EXPERIMENTAL STUDY ON JOINTS WITH NON-PERPENDICULAR ELEMENTS IN CONCRETE-FILLED STEEL TUBE COLUMN WITH STEEL BEAM SYSTEMS[J]. INDUSTRIAL CONSTRUCTION, 2004, 34(12): 23-26,58. doi: 10.13204/j.gyjz200412006