Li Qingning, He Di, Wang Peng, Jiang Weishan. EXPERIMENTAL STUDY OF SEISMIC BEHAVIOR OF THE STEEL TUBULAR ASSEMBLY COLUMN[J]. INDUSTRIAL CONSTRUCTION, 2014, 44(07): 11-15.
Citation:
Wang Wenjun, Zhu Xiangrong. ASSESSMENT ON DEFORMATION OF COMPOSITE FOUNDATION UNDER A LARGE OIL TANK[J]. INDUSTRIAL CONSTRUCTION , 2006, 36(9): 53-56.
Li Qingning, He Di, Wang Peng, Jiang Weishan. EXPERIMENTAL STUDY OF SEISMIC BEHAVIOR OF THE STEEL TUBULAR ASSEMBLY COLUMN[J]. INDUSTRIAL CONSTRUCTION, 2014, 44(07): 11-15.
Citation:
Wang Wenjun, Zhu Xiangrong. ASSESSMENT ON DEFORMATION OF COMPOSITE FOUNDATION UNDER A LARGE OIL TANK[J]. INDUSTRIAL CONSTRUCTION , 2006, 36(9): 53-56.
ASSESSMENT ON DEFORMATION OF COMPOSITE FOUNDATION UNDER A LARGE OIL TANK
1.
1. Ningbo Institute of Technology,Zhejiang University Ningbo 315100;
2.
2. Research Institute of Geotechnical Engineering,Zhejiang University Hangzhou 310027
Received Date: 2006-01-26Publish Date:
2006-09-20
Abstract
Foundation treatment is an important link for large oil tank engineering. It is introduced the treatment effectiveness of 50 000 m3 oil tank foundation, which sits on soft soil and improved with stone columns. Based on the testing settlement data, settlement properties of ring wall foundation and oil tank center foundation are individually discussed during filling water preload, and Poison method is used to forecast the ultimate settlement of the ring wall foundation. Nonhomogeneos deformation at the end of water filling preload is also analyzed. All conclusions will provide a basis for the reinforcement of the oil tank foundation.
References
贾庆山 . 大型油罐软土地基容倾斜值. 岩土工程学报, 1991, 13(1) : 54-60
[2] 叶书麟, 韩, 闽泉欣, 等. 碎石桩加固油罐地基试验研究. 岩土工程学报, 1992, 14(6) : 50-59
[3] 李, 周昌清. 充水预压的油罐锥面沉降和地基变形观测. 水利水运工程学报, 2004(2) : 59-62
[4] 赵同顺, 周. 大型油罐地基变形特性的研究. 岩石力学与工程学报, 2004, 23(6) : 1037-1043
[5] 应宏伟, 杨晓刚, 卞守中 , 等. 大型油罐地基现场试验分析. 岩土工程学报, 2005, 27(2) : 157-161
[6] 宰金珉, 梅国雄. 成长曲线在地基沉降预测中的应用 . 南京建筑工程学院学报, 2000(2) : 8-12
Relative Articles
[1] ZHANG Yufen, ZHANG Yan, JIA Hongxin. Analysis and Calculations for Bearing Capacity of New Composite CFST Pier Columns Under Axial Compression [J]. INDUSTRIAL CONSTRUCTION, 2022, 52(12): 128-135,155. doi: 10.13204/j.gyjzG21020601
[2] Du Chuang, Yang Xiaoming, Wei Shaowu, Du Zitao. RESEARCH ON THE BEARING CAPACITY FORMULA OF CONCRETE-FILLED SQUARE STEEL TUBULAR COLUMN [J]. INDUSTRIAL CONSTRUCTION, 2014, 44(07): 155-158. doi: 10.13204/j.gyjz2001407032
[3] Wang Qingli, Chen Xingyu, Zhang Zhirun. STATIC PEＲFOＲMANCE OF CONCＲETE FILLED SQUAＲE STEEL
TUBULAR BEAM-COLUMN STRENGTHENED BY CFRP EXTERNALLY(I):EXPERIMENTAL STUDY AND FINITE ELEMENT SIMULATION [J]. INDUSTRIAL CONSTRUCTION, 2014, 44(07): 141-145.
[4] Yin Xiaodong, Li Qinggang, Wang Qingli. STATIC PERFORMANCE OF THE HIGH-PERFORMANCE CONCRETE FILLED STEEL TUBULAR BEAM-COLUMN(Ⅰ): EXPERIMENTAL STUDY AND FINITE ELEMENT SIMULATION [J]. INDUSTRIAL CONSTRUCTION, 2013, 43(3): 24-29. doi: 10.13204/j.gyjz201303005
[5] Zhang Lan. NONLINEAR ANALYSIS OF CONCRETE-FILLED SQUARE STEEL TUBULAR BEAM-COLUMN SECTIONS UNDER BENDING AND AXIAL LOAD [J]. INDUSTRIAL CONSTRUCTION, 2013, 43(5): 132-136,143. doi: 10.13204/j.gyjz201305028
[6] Wang Qingli, Li Ruilin, Li Qinggang, Wang Yue. STATIC PERFORMANCE OF THE HIGH-PERFORMANCE CONCRETE FILLED STEEL TUBULAR STUB COLUMN(Ⅱ): MECHANISM ANALYSIS AND LOAD BEARING CAPACITY [J]. INDUSTRIAL CONSTRUCTION, 2013, 43(3): 8-12. doi: 10.13204/j.gyjz201303002
[7] Wang Qingli, Wu Jun, Li Qinggang, Wang Yue. STATIC PERFORMANCE OF THE HIGH-PERFORMANCE CONCRETE FILLED STEEL TUBULAR FLEXURAL MEMBER(Ⅱ): MECHANISM ANALYSIS AND LOAD BEARING CAPACITY [J]. INDUSTRIAL CONSTRUCTION, 2013, 43(3): 18-23. doi: 10.13204/j.gyjz201303004
[8] Yin Xiaodong, Li Qinggang, Wang Qingli. STATIC PERFORMANCE OF THE HIGH-PERFORMANCE CONCRETE FILLED STEEL TUBULAR BEAM-COLUMN(Ⅱ): MECHANISM ANALYSIS AND LOAD BEARING CAPACITY [J]. INDUSTRIAL CONSTRUCTION, 2013, 43(3): 30-35,7. doi: 10.13204/j.gyjz201303006
[9] Shu Ganping, Zheng Baofeng, Shen Xiaoming. IN- PLANE STABILITY DESIGN METHOD OF STAINLESS STEEL BEAM- COLUMNS [J]. INDUSTRIAL CONSTRUCTION, 2012, 42(5): 41-44. doi: 10.13204/j.gyjz2011205006
[10] Long Yueling, Cai Jian, Huang Yansheng. ULTIMATE CAPACITY OF AXIALLY-LOADED RECTANGULAR CFT STUB COLUMNS [J]. INDUSTRIAL CONSTRUCTION, 2010, 40(7): 95-99. doi: 10.13204/j.gyjz201007024
[11] Liu Xiang, Wu Yongbo. EXPERIMENT AND SIMULATION ANALYSIS OF BEARING CAPACITY OF CONCRETE－FILLED RECTANGULAR STEEL TUBE BEAM [J]. INDUSTRIAL CONSTRUCTION, 2010, 40(7): 91-94,104. doi: 10.13204/j.gyjz201007023
[12] Guo Yanlin, Jiang Leixin, Zhang Enuo. RESEARCH ON IN-PLANE STABILITY BEARING CAPACITY OF LIPPED H-SECTION TAPERED MEMBERS UNDER COMPRESSION AND BENDING [J]. INDUSTRIAL CONSTRUCTION, 2009, 39(9): 32-35. doi: 10.13204/j.gyjz200909006
[13] Guo Yanlin, Jiang Leixin, Zhang Enuo. LIMIT STRENGTH OF LIPPED H-SECTION MEMBERS UNDER BOTH COMPRESSION AND BENDING [J]. INDUSTRIAL CONSTRUCTION, 2009, 39(9): 22-27,14. doi: 10.13204/j.gyjz200909004
[14] Guo Hongxiang, Zhao Junhai, Wei Xueying. ANALYSIS OF BEARING CAPACITY OF CONCRETE-FILLED SQUARE STEEL TUBE COLUMN UNDER AXIAL LOAD [J]. INDUSTRIAL CONSTRUCTION, 2008, 38(3): 9-11,4. doi: 10.13204/j.gyjz200803003
[15] Yao Guohuang, Han Linhai. PRIMARY RESEARCH ON CALCULATIONS FOR BEARING CAPACITY OF CONCRETE FILLED HIGH STRENGTH STEEL TUBULAR MEMBERS [J]. INDUSTRIAL CONSTRUCTION, 2007, 37(2): 96-99,88. doi: 10.13204/j.gyjz200702024
[16] Zhao Zhonghu, Xie Heping, Xu Bo, Liu Zhibao. PRESENT STATUS OF RESEARCH ON CHARACTERISTICS OF RESTORING FORCE OF RC COMPRESSION-FLEXURE MEMBER [J]. INDUSTRIAL CONSTRUCTION, 2006, 36(1): 62-65. doi: 10.13204/j.gyjz200601019
[17] Zhou Jing, Cai Jian. ELASTOPLASTIC BEARING CAPACITY ANALYSIS FOR CONCRETE-FILLED STEEL TUBE T-SHAPED COLUMNS [J]. INDUSTRIAL CONSTRUCTION, 2006, 36(5): 87-90. doi: 10.13204/j.gyjz200605023
[18] Cheng Rong, Wang Zhihao. THE LOADING CAPACITY AND PRODUCING METHOD ANALYSIS OF COMPOSITE REINFORCED SCFT COLUMN [J]. INDUSTRIAL CONSTRUCTION, 2006, 36(9): 84-86.
[19] Zhao Dazhou, Wang Qingxiang, Guan Ping. RESEARCH ON LOAD-BEARING CAPACITY OF STEEL TUBULAR COLUMNS FILLED WITH STEEL-REINFORCED HIGH-STRENGTHCONCRETE SUBJECTED TO COMPRESSION AND BENDING [J]. INDUSTRIAL CONSTRUCTION, 2005, 35(9): 84-85,93. doi: 10.13204/j.gyjz200509023
[20] Yu Qing, Tao Zhong, Zhang Zheng. PARAMETER ANALYSIS OF LONG-TERM LOAD EFFECTS ON DEFORMATION OF FRP-CONFINED CONCRETE COLUMNS [J]. INDUSTRIAL CONSTRUCTION, 2005, 35(9): 8-10,41. doi: 10.13204/j.gyjz200509003
Proportional views
Created with Highcharts 5.0.7 Amount of access Chart context menu Abstract Views, HTML Views, PDF Downloads Statistics Abstract Views HTML Views PDF Downloads 2024-05 2024-06 2024-07 2024-08 2024-09 2024-10 2024-11 2024-12 2025-01 2025-02 2025-03 2025-04 0 1 2 3 4 5 Created with Highcharts 5.0.7 Chart context menu Access Class Distribution FULLTEXT : 23.1 % FULLTEXT : 23.1 % META : 76.9 % META : 76.9 % FULLTEXT META Created with Highcharts 5.0.7 Chart context menu Access Area Distribution 其他 : 12.3 % 其他 : 12.3 % China : 1.5 % China : 1.5 % 北京 : 21.5 % 北京 : 21.5 % 杭州 : 3.1 % 杭州 : 3.1 % 湖州 : 1.5 % 湖州 : 1.5 % 芒廷维尤 : 27.7 % 芒廷维尤 : 27.7 % 西宁 : 29.2 % 西宁 : 29.2 % 阳泉 : 3.1 % 阳泉 : 3.1 % 其他 China 北京 杭州 湖州 芒廷维尤 西宁 阳泉
Login
Register
E-alert
DownLoad: