Research on Physical and Mechanical Properties of Bambusa emeiensis Bamboo Scrimber

LI Hao; MA Xinru; XIA Lin; XU Li; JIANG Yongze; CHEN Yan; QI Jinqiu

doi:10.3724/j.gyjzG24083101

Volume 55 Issue 2

Feb. 2025

Turn off MathJax

Article Contents

Abstract

References

Article Navigation > INDUSTRIAL CONSTRUCTION > 2025 > 55(2): 1-9

ZHOU Qiaoling, ZHAO Shixing, ZHONG Ziqin, ZHANG Ming, CHEN Shuwei, YANG Shuheng. Experimental Research on the Seismic Performance of Bamboo Scrimber Beam-Column Joints[J]. INDUSTRIAL CONSTRUCTION, 2025, 55(2): 44-51. doi: 10.3724/j.gyjzG24102205

Citation:

LI Hao, MA Xinru, XIA Lin, XU Li, JIANG Yongze, CHEN Yan, QI Jinqiu. Research on Physical and Mechanical Properties of Bambusa emeiensis Bamboo Scrimber[J]. INDUSTRIAL CONSTRUCTION, 2025, 55(2): 1-9. doi: 10.3724/j.gyjzG24083101

Citation:

PDF( 5440 KB)

Research on Physical and Mechanical Properties of Bambusa emeiensis Bamboo Scrimber

doi: 10.3724/j.gyjzG24083101

LI Hao^1,2,3,
MA Xinru^1,2,3,
XIA Lin^1,2,3,
XU Li^1,2,3,
JIANG Yongze^1,2,3,
CHEN Yan^1,2,3,
QI Jinqiu^{1,2,3
,
,}

1. College of Forestry, Sichuan Agricultural University, Chengdu 611130, China;
2. National Forestry and Grassland Administration Key Laboratory of Forest Resources Conservation and Ecological Safety on the Upper Reaches of the Yangtze River, Chengdu 611130, China;
3. Forestry Ecological Engineering in the Upper Reaches of Yangtze River Key Laboratory of Sichuan Province, Chengdu 611130, China

Received Date: 2024-08-31
Available Online: 2025-04-02

Abstract

Abstract

To enrich the fundamental data on the physical and mechanical properties of bamboo scrimber and to promote its application in building structures, five densities (0.8, 0.9, 1.0, 1.1, 1.2 g/cm³) and two kinds of assembly methods (longitudinal, vertical and horizontal) of Bambusa emeiensis bamboo scrimber were prepared.According to the standards Structural Bamboo Scrimber (LY/T 3194—2020) and Bamboo Scrimber (GB/T 40247—2021), the study evaluated 13 properties, including density, water resistance, bending resistance, compressive strength, tensile strength, and shear resistance. The results revealed that the measured density varied from the set density in different areas of the bamboo scrimber board. The density deviation of the longitudinal plates was from -3.95% to 5.89%, and the density deviation of the vertical and horizontal plates was from -5.80% to 6.22%. As the density increased, the overall physical and mechanical properties of longitudinal plates improved, although the strength of vertical and horizontal plates did not vary significantly with density. For the longitudinal plates, the water absorption width expansion rate ranged from 0.69% to 2.73%, and the water absorption thickness expansion ratio ranged from 3.27% to 6.56%. The bending strength was between 194.5 MPa and 228.2 MPa, the bending modulus of elasticity ranged from 19.03 GPa to 28.90 GPa, and the horizontal shear strength ranged from 10.8 MPa to 18.5 MPa. The mechanical strength of the vertical and horizontal plates was generally lower than that of the longitudinal plates, while transverse compressive strength, shearing strength parallel to grain and widths welling were higher than those of the longitudinal plates. Based on the measured physical and mechanical strength data, it was recommended to use bamboo scrimber with a density greater than 0.95 g/cm³ to achieve better strength stability in practical applications.
- bambusa emeiensis,
- bamboo scrimber,
- physical properties,
- mechanical properties,
- assembly method

FullText(HTML)

References(23)

References

[1]	国家林业和草原局. 中国森林资源报告[M]. 北京: 中国林业出版社, 2019.
[2]	国家林业和草原局. 中国林业和草原统计年鉴2022[M]. 北京: 中国林业出版社, 2023.
[3]	国家发展改革委, 工业和信息化部, 财政部, 等. 国家发展改革委等部门关于印发《加快"以竹代塑"发展三年行动计划》的通知[EB/OL]. (2023-10-12)[2024-08-26]. https://www.gov.cn/zhengce/zhengceku/202311/content_6913316.htm.
[4]	中国科学院中国植物志编辑委员会. 中国植物志:第九卷第一分册[M]. 北京: 科学出版社, 1996.
[5]	HUANG Y, JI Y, YU W. Development of bamboo scrimber: a literature review[J]. Journal of Wood Science, 2019, 65(1), 25.
[6]	于文吉. 我国重组竹产业发展现状与机遇[J]. 世界竹藤通讯, 2019, 17(3): 1-4.
[7]	赵仕兴, 周巧玲, 齐锦秋, 等. 重组竹结构的研究现状与工程应用[J]. 建筑结构, 2023, 53(7): 109-117.
[8]	许杨, 刘倩, 孙子健, 等. 高密度重组竹的物理力学性能研究[J]. 林产工业, 2024, 61(6): 20-26.
[9]	YU Y, LIU R, HUANG Y, et al. Preparation, physical, mechanical, and interfacial morphological properties of engineered bamboo scrimber[J]. Construction and Building Materials, 2017, 157: 1032-1039.
[10]	齐越, 吴江源, 任丁华, 等. 重组竹制造与应用技术研究进展[J]. 林业科学, 2023, 59(6): 159-168.
[11]	苏光荣, 李贤军, 胡嘉裕, 等. 重组竹尺寸稳定性及力学特性[J]. 中南林业科技大学学报, 2022, 42(2): 159-168.
[12]	谢九龙, 齐锦秋, 黄兴彦, 等. 生长发育进程中慈竹秆形结构及物理力学性质[J]. 四川农业大学学报, 2012, 30(1): 46-49 , 81.
[13]	齐锦秋, 于文吉, 余养伦, 等. 竹节对竹基纤维复合材料性能的影响[J]. 木材工业, 2012, 26(6): 1-3.
[14]	齐锦秋, 于文吉, 黄兴彦, 等. 梁山慈竹重组竹材密度对其微观形态及性能的影响[J]. 木材工业, 2013, 27(6): 25-28.
[15]	郝秀. 竹基纤维复合材料重组单元制备机理与力学性能增强机制[D]. 哈尔滨: 东北林业大学, 2024.
[16]	魏金光. 高密度竹基纤维复合材料的性能及其胶合成型机理研究[D]. 北京: 中国林业科学研究院, 2022.
[17]	WU J, HUANG Y, HU J, et al. Effects of density and resin content on the rebonding performance of bamboo scrimber composite[J]. Construction and Building Materials, 2023, 400, 132848.
[18]	KUMAR A, VLACH T, LAIBLOVA L, et al. Engineered bamboo scrimber: influence of density on the mechanical and water absorption properties[J]. Construction and Building Materials, 2016, 127: 815-827.
[19]	盛叶, 黄庚浪, 叶小凡, 等. 密度和含水率对重组竹顺纹抗拉强度的影响[J]. 林业科学, 2024,10(10): 110-121.
[20]	ZHANG K, HOU Y, LU Y, et al. Experimental study on the fracture toughness of bamboo scrimber[J]. Materials, 2023, 16(13), 4880.
[21]	上官蔚蔚. 重组竹物理力学性质基础研究[D]. 北京: 中国林业科学研究院, 2015.
[22]	徐有明. 木材学[M]. 第2版. 北京: 中国林业出版社, 2019.
[23]	秦柏东. 硬头黄竹重组材制备工艺及性能研究[D]. 雅安: 四川农业大学, 2017.

Relative Articles

[1]	LYU Henglin, JING Yanrui, MOU Xingyu, ZHANG Chen. Research on Seismic Performance of Beam-Column Joints with Reinforced Webs Connected with Fully Bolted Double-Angle Steel[J]. INDUSTRIAL CONSTRUCTION, 2024, 54(7): 138-146. doi: 10.3724/j.gyjzG21110115
[2]	HU Ziming, GUO Lei, WANG Jingfeng, LIAO Feiyu. A Design Method for One-Side Bolted Connection Joints of Prefabricated Concrete-Encased CFST Composite Column and the Analysis of Seismic Performance of CECFST Frames[J]. INDUSTRIAL CONSTRUCTION, 2024, 54(11): 136-143. doi: 10.3724/j.gyjzG23103111
[3]	WU Junlin, YANG Hui, GUO Zhengxing. Numerical Analysis of Seismic Performance of Local Post-Tensioned Prestressed Assembled Concrete Frame Beam-Column Joints[J]. INDUSTRIAL CONSTRUCTION, 2023, 53(3): 29-34,28. doi: 10.13204/j.gyjzG22081301
[4]	YANG Xiaohua, ZHANG Qian, WU Senkun, FENG Jian, CAI Jianguo. Seismic Performance Analysis of Beam-Column Connections of Prefabricated Fiber Modified Concrete Frames[J]. INDUSTRIAL CONSTRUCTION, 2023, 53(4): 102-107,147. doi: 10.13204/j.gyjzG20122208
[5]	YE Chongyang, WANG Xinwu, SHI Qiang, SUN Haisu. Influence of the Connection Structure of Energy Dissipating Beam Section on the Seismic Performance of Eccentrically Braced Steel Frame[J]. INDUSTRIAL CONSTRUCTION, 2023, 53(8): 58-64,205. doi: 10.13204/j.gyjzG21020703
[6]	YANG Zhao, LING Zhihan, YE Jiaolong, LIU Kun, YANG Quan, ZHOU Xin. EXPERIMENTAL STUDY ON ASEISMIC PROPERTIES OF EARTHQUAKE-DAMAGED JOINTS FOR ASSEMBLED MONOLITHIC CONCRETE FRAMES STRENGTHENED WITH CARBON FIBER SHEETS[J]. INDUSTRIAL CONSTRUCTION, 2021, 51(7): 185-193. doi: 10.13204/j.gyjzG19121615
[7]	GAO Peinan, DENG Yang, LI Aiqun, LU Fengyong. REVIEW ON SEISMIC PERFORMANCE OF CONNECTION JOINTS OF PREFABRICATED CONCRETE FRAME STRUCTURES[J]. INDUSTRIAL CONSTRUCTION, 2021, 51(2): 171-185,152. doi: 10.13204/j.gyjzG20040805
[8]	MEN Yiang, WANG Xinwu, YU Yongqiang, SHI Qiang. RESEARCH ON SEISMIC BEHAVIOR OF BEAM-COLUMN JOINTS OF PREFABRICATED STEEL FRAME STRUCTURES[J]. INDUSTRIAL CONSTRUCTION, 2020, 50(3): 156-159,135. doi: 10.13204/j.gyjz202003027
[9]	Gao Danying, Zhang Junwei. EXPERIMENTAL INVESTIGATION ON SEISMIC BEHAVIOR OF STEEL FIBER REINFORCED HIGH- STRENGTH CONCRETE FRAME EXTERIOR JOINTS[J]. INDUSTRIAL CONSTRUCTION, 2012, 42(5): 84-89,28. doi: 10.13204/j.gyjz2011205015
[10]	Wang Quanfeng, Fa Guanzhe, Chen Haojun, Huang Yihui, Wang Lingyun. AN EXPERIMENTAL STUDY ON THE SEISMIC PERFORMANCE OF BFRP REINFORCED MORTISE-TENON JOINTS OF DIFFERENT CONSTRUCTION METHODS[J]. INDUSTRIAL CONSTRUCTION, 2011, 41(6): 62-66. doi: 10.13204/j.gyjz201106013
[11]	Hu Qi, Hao Jiping, Guo Hongchao, Zhou Qi, Li Yan. EXPERIMENTAL STUDY ON SEISMIC BEHAVIOR OF FOUR-ANGLE COMPOSITE STEEL FRAME WITH CROSS-STIFFENED STEEL PLATE SHEAR WALLS[J]. INDUSTRIAL CONSTRUCTION, 2011, 41(5): 112-115. doi: 10.13204/j.gyjz201105025
[12]	Liu Chunyang, Li Zhenbao, Ma Hua, Han Jianqiang. EXPERIMENT STUDY ON ASEISMIC BEHAVIOR OF RC FRAME SPACE JOINTS[J]. INDUSTRIAL CONSTRUCTION, 2011, 41(6): 67-70. doi: 10.13204/j.gyjz201106014
[13]	Wu Tao, Xing Guohua, Liu Boquan, Li Hong, Huang Hua. EXPERIMENTAL STUDY ON SEISMIC BEHAVIOR OF ABNORMAL INTERIOR JOINTS WITH VERTICAL HAUNCHED BEAM IN REINFORCED CONCRETE FRAME STRUCTURES[J]. INDUSTRIAL CONSTRUCTION, 2010, 40(2): 64-68. doi: 10.13204/j.gyjz201002015
[14]	Wu Tao, Xing Guohua, Liu Boquan. ANALYSIS OF EFFECT FACTOR ON SEISMIC BEHAVIOR OF ABNORMAL INTERIOR JOINTS IN REINFORCED CONCRETE FRAME STRUCTURES[J]. INDUSTRIAL CONSTRUCTION, 2009, 39(10): 30-34. doi: 10.13204/j.gyjz200910010
[15]	Liu Jianwei, Li Yingmin, Yang Zhihong, Xia Hongliu, Shan Liang. COMPARISON OF ASEISMIC BEHAVIOR OF TRADITIONAL AND SANDWICH SPACE RC BEAM-COLUMN JOINTS BASED ON CYCLIC LOAD TEST[J]. INDUSTRIAL CONSTRUCTION, 2009, 39(2): 88-93. doi: 10.13204/j.gyjz200902014
[16]	Zhou Nannan, Wang Lai, Wang Guobing, Yang Ning. NONLINEAR FINITE ELEMENT ANALYSIS OF SEISMIC BEHAVIOR OF SEMI-RIGID CONNECTION STEEL FRAME[J]. INDUSTRIAL CONSTRUCTION, 2009, 39(3): 112-115,85. doi: 10.13204/j.gyjz200903029
[17]	Chen Changhong, Ma Lewei, Shan Jian, Huang Ying, WuMinzhe. ASEISMIC PERFORMANCE EXPERIMENT ON THE SPECIAL-SHAPED COLUMN FRAME STRUCTURES JOINTS OF REINFORCED CONCRETE[J]. INDUSTRIAL CONSTRUCTION, 2007, 37(2): 6-10,13. doi: 10.13204/j.gyjz200702002
[18]	Wei Zhuobin. STUDY ON THE INFLUENCE OF SCALLOP STRUCTURE ON ASEISMIC BEHAVIOR OF BEAM-COLUMN WELDING CONNECTIONS IN STEEL FRAMES[J]. INDUSTRIAL CONSTRUCTION, 2007, 37(7): 78-81. doi: 10.13204/j.gyjz200707023
[19]	Mao Weifeng, Wu Yuntian, Xiao Yan, Anderson J.C., Nie Jianguo. EXPERIMENTAL RESEARCH ON SEISMIC BEHAVIOR OF BOLTED STEEL BEAM TO RC COLUMN CONNECTIONS[J]. INDUSTRIAL CONSTRUCTION, 2005, 35(11): 1-4. doi: 10.13204/j.gyjz200511001
[20]	Wu Tao, Liu Boquan, Bai Guoliang, Song Junshan, Sun Hongbo. EXPERIMENTAL STUDY ON SEISMIC BEHAVIOR OF WARPPED STEEL CONCRETE FRAME EXTERIOR JOINTS UNDER HIGH AXIAL COMPRESSION RATIO[J]. INDUSTRIAL CONSTRUCTION, 2004, 34(7): 64-66. doi: 10.13204/j.gyjz200407018