Experimental Study and Finite Element Analysis of PBL Shear Connectors with Additional Steel Pipes

GUO Zhengjie; CHEN Jing; BAI Zhiqiang; WANG Jianping

doi:10.3724/j.gyjzG24063001

Volume 54 Issue 11

Nov. 2024

Turn off MathJax

Article Contents

Article Navigation > INDUSTRIAL CONSTRUCTION > 2024 > 54(11): 181-188

GUO Zhengjie, CHEN Jing, BAI Zhiqiang, WANG Jianping. Experimental Study and Finite Element Analysis of PBL Shear Connectors with Additional Steel Pipes[J]. INDUSTRIAL CONSTRUCTION, 2024, 54(11): 181-188. doi: 10.3724/j.gyjzG24063001

Citation:

GUO Zhengjie, CHEN Jing, BAI Zhiqiang, WANG Jianping. Experimental Study and Finite Element Analysis of PBL Shear Connectors with Additional Steel Pipes[J]. INDUSTRIAL CONSTRUCTION, 2024, 54(11): 181-188. doi: 10.3724/j.gyjzG24063001

Citation:

PDF( 6425 KB)

Experimental Study and Finite Element Analysis of PBL Shear Connectors with Additional Steel Pipes

doi: 10.3724/j.gyjzG24063001

1. School of Architecture and Engineering, Liaocheng University, Liaocheng 252000, China;
2. School of Civil Engineering and Transportation, Weifang University, Weifang 261000, China;
3. Research Center of Space Structures of Guizhou University, Guiyang 550000, China

Received Date: 2024-06-30
Available Online: 2024-12-05

Abstract

Abstract

In order to cope with the complicated stress state at the material interface of the composite open-web sandwich plate and to improve the performance of the combined action of the structure, the paper proposed a PBL shear connectors with additional steel pipes and carried out experimental analyses and finite element simulation studies on it. The push-out tests of PBL shear connectors specimens with additional steel pipes and traditional PBL shear connectors specimens were carried out respectively. By analyzing the failure phenomenon, load-slip curves and shear stiffness of the two groups of specimens, it was found that the additional steel pipes can significantly improve the shear performance of PBL shear connectors. The stress distribution of each member of this type of PBL shear connectors and the influence of additional steel pipe parameters on the shear stiffness of this new type of PBL shear connectors were further revealed through the finite element parameter expansion analysis. It was found that the existence of additional steel pipe could avoid the phenomenon of stress concentration in the internal component and protect the internal component. The study showed that steel pipe parameters such as pipe diameter, pipe wall thickness and pipe length had different degrees of influence on the bearing capacity of this type of shear connector, with the most significant effect of pipe diameter.
- steel pipe shear connectors,
- PBL shear connectors,
- push-out specimen,
- shear resistance,
- finite element simulation

FullText(HTML)

References(25)

References

[1]	YANG C, JIAN N, CHONG R, et al.A strength degradation model of PBL shear connectors under fatigue load[J].Structures, 2023, 48:1684-1692.
[2]	肖林, 卫星, 强士中.两类PBL剪力键推出试验的对比研究[J].土木工程学报, 2013, 46(11):70-80.
[3]	Leonhardt E F, ANDRAE W. ANDRAE H P, et al. Neues vorteilhaftes verbundmittel fur stahlverbundtragwerke mihoher Dauerfestirkeit [J].Beton and Stahlbetonbau, 1987, 82(12): 325-331(in German).
[4]	VELDANDA M R, HOSAIN M U. Behavior of perfobond rib shear connectors in composite beams: push-out tests[J]. Canadian Journal of Civil Engineering, 1992, 19(2): 1-10.
[5]	OGUEJIOFOR E C, HOSAIN M U. Numerical analysis of push-out specimens with perfobond rib connectors[J]. Computers and Structures, 1996, 62(4): 617-624.
[6]	MEDBERRY S B, SHAHROOZ B M. Perfobond shear connector for composite construction[J].AISC Journal, 2002(1): 2-12.
[7]	VERISSIMO G S. Desenvolvimento deum conector decisalhamento em chapa dentada para estruturas mistas de aco e concreto e estudo do seu comportamento[D]. Belo Horizonte: Universidade Federal de Minas Gerais, 2007(in Portuguese).
[8]	张成, 刘斌.多排开孔钢板剪力键群受剪性能研究[J].城市道桥与防洪, 2020(2):154-158, 18 -19.
[9]	DENG K L, WANG Y C, ZHU S C, et al.Hysteresis shear-slip model of PBL shear connectors under cyclic loading[J].Advances in Structural Engineering, 2023, 26(15):2894-2908.
[10]	WANG H, WANG W, WU S.Study on load-slip curve of a PBL shear key at a steel-concrete composite joint[J].Applied Sciences, 2023, 13(10):61-65.
[11]	LU W R, LI D H, HUANG Y M, et al.Study on shear resistance property of a new PBL connector with steel-rubber tenon[J].Materials, 2023, 16(6):2291-2291.
[12]	ZHAN Y L, HUANG W F, LI Y Y, et al.Shear behavior and analytical model of T-type perfobond rib connectors[J].Archives of Civil and Mechanical Engineering, 2023, 23(3):150-155.
[13]	ZHAN Y L, HUANG W F, LI Y Y, et al.Experimental investigation on mechanical behavior of T-type perfobond rid shear connectors under combined shear and tension[J].Journal of Building Engineering, 2023, 73, 106840.
[14]	HUANG W, ZHAN Y, ZHANG C, et al.Tensile resistance and shear-tension interaction relationship of T-type perfobond rid shear connectors[J].Journal of Building Engineering, 2024, 89, 109183.
[15]	HUANG W, ZHAN Y, LI J, et al.Effect of flange widths of T-type PBL shear connectors on the mechanical performance in negative bending moment region of steel-concrete composite beams[J].Structures, 2024, 66, 106846.
[16]	陈海, 郭子雄, 刘阳, 等.斜板PBL剪力键受剪性能试验研究[J].建筑结构学报, 2022, 43(1):209-218.
[17]	黄彩萍, 游文峰, 谭金甲, 等.弯折贯穿钢筋PBL剪力键力学性能试验[J].土木工程与管理学报, 2021, 38(6):113-120.
[18]	武永丽, 王秀丽, 李芳军, 等.十字型开孔钢板剪力键抗剪性能试验研究[J].工业建筑, 2023, 53(7):124-129.
[19]	European Committee for Standardization.Eurocode 4:design of composite steel and concrete:EC 4[S].Brussels:European Committee for Standardization, 2004.
[20]	陈海, 郭子雄, 刘阳, 等.新型组合剪力键抗剪机理及承载力计算方法研究[J].工程力学, 2019, 36(3):159-168.
[21]	王松林, 王银辉, 李志勇, 等.U型Twin-PBL剪力键承载力的推出试验研究[J].湖南交通科技, 2024, 50(1):82-86 , 100.
[22]	庞芝炯, 周志祥.基于塑性损伤模型的PBL推出试件数值分析方法[J].中外公路, 2014, 34(5):110-114.
[23]	中华人民共和国住房和城乡建设部.混凝土结构设计标准:GB/T 50010—2010[S].北京:中国建筑工业出版社, 2024.
[24]	王建萍, 白志强, 辛晓萱, 等.附加装配式钢管PBL剪力键抗剪承载力研究[J].建筑结构, 2022, 52(增刊1):1887-1892.
[25]	SU Q, WANG W, LUAN H, et al.Experimental research on bearing mechanism of perfobond rib shear connectors[J].Journal of Constructional Steel Research, 2014, 95: 22-31.