Citation: | LU Fangyong, LI Ming, FANG Saiyin, DENG Tingting, YANG Longfei, SHEN Zhihui. Simulations of Wood Viscoelastic Acoustic Emission Propagation Behavior and Wave Velocity Estimation Based on COMSOL Software[J]. INDUSTRIAL CONSTRUCTION, 2024, 54(10): 215-222. doi: 10.3724/j.gyjzG24040907 |
[1] |
邢雪峰, 李善明, 周永东, 等. 声发射技术在木质材料损伤监测中的应用研究进展 [J]. 世界林业研究, 2022, 35(6): 63-68.
|
[2] |
杨瑞峰, 马铁华. 声发射技术研究及应用进展 [J]. 中北大学学报(自然科学版), 2006 (5): 456-461.
|
[3] |
RESCALVO F J, RODRíGUEZ M, BRAVO R, et al. Acoustic emission and numerical analysis of pine beams retrofitted with FRP and poplar wood [J]. Materials, 2020, 13(2): 435-447.
|
[4] |
SANABRIA S J, FURRER R, NEUENSCHWANDER J, et al. Analytical modeling, finite-difference simulation and experimental validation of air-coupled ultrasound beam refraction and damping through timber laminates, with application to non-destructive testing [J]. Ultrasonics, 2015, 63: 65-85.
|
[5] |
孙建平, 王逢瑚, 胡英成. 基于声发射和神经网络的木材受力损伤过程检测 [J]. 仪器仪表学报, 2011, 32(2): 342-347.
|
[6] |
张晓萌, 余观夏, 许为凤, 等. 激光超声在木材无损检测中的仿真研究 [J]. Applied Physics, 2018, 8(11): 480-488.
|
[7] |
TALLAVO F, CASCANTE G, PANDEY M D. Experimental verification of an orthotropic finite element model for numerical simulations of ultrasonic testing of wood poles [J]. European Journal of Wood and Wood Products, 2017, 75: 543-551.
|
[8] |
SOLANKI S,BARUAH B, TIWARI P.Modeling and simulation of wood pyrolysis process using COMSOL Multiphysics[J]. Bioresource Technology Reports,2022,17,100941.
|
[9] |
ZAHEDI M, KAZEMI NAJAFI S, FVSSL J, et al. Determining elastic constants of poplar wood (Populus deltoides) by ultrasonic waves and its application in the finite element analysis [J]. Wood Material Science & Engineering, 2022, 17(6): 668-678.
|
[10] |
张鑫明, 李萍, 李玮, 等. 奥氏体不锈钢应力腐蚀微裂纹的非线性表面波检测 [J]. 无损检测, 2021, 43(10): 5-11.
|
[11] |
陈丹, 肖会芳, 黎敏, 等. 金属材料内部非金属夹杂超声检测的数值模拟 [J]. 工程科学学报, 2015, 37(7): 942-949.
|
[12] |
杨慧, 顾菊平, 华亮, 等. 基于小波的声发射信号去噪研究 [J]. 现代电子技术, 2017, 40(13): 70-72
,76.
|
[13] |
徐业守, 徐赵东, 葛腾, 等. 黏弹性材料等效分数阶微观结构标准线性固体模型 [J]. 力学学报, 2017, 49(5): 1059-1069.
|
[14] |
徐赵东, 周云, 周福霖. 粘弹性阻尼器三种计算模型的对比与分析 [J]. 华南建设学院西院学报, 1999 (2): 1-7.
|
[15] |
江梦策, 孙磊, 杨进京, 等. 粘弹性阻尼器的计算模型模拟分析 [J]. 科技信息(科学教研), 2008 (20): 393,428.
|
[16] |
孙业志, 熊正明, 周健. 黏弹性散体介质中波的传播和耗散 [J]. 南方冶金学院学报, 2003 (1): 1-6.
|
[17] |
伏喜斌. 压力容器焊缝超声TOFD检测的COMSOL模拟 [J]. 无损检测, 2018, 40(7): 9-14.
|
[18] |
ZERWER A, CASCANTE G, HUTCHINSON J. Parameter estimation in finite element simulations of Rayleigh waves [J]. Journal of Geotechnical and Geoenvironmental Engineering, 2002, 128(3): 250-261.
|
[19] |
MOSER F, JACOBS L J, QU J. Modeling elastic wave propagation in waveguides with the finite element method [J]. NDT & E International, 1999, 32(4): 225-234.
|
[20] |
梁轩, 杜建镔. 采用减震榫桥梁非线性动力学分析计算方法 [J]. 工程力学, 2016, 33(4): 136-143.
|
[21] |
NYQUIST H. Certain topics in telegraph transmission theory [J]. Transactions of the American Institute of Electrical Engineers, 1928, 47(2): 617-644.
|
[22] |
杨光. 粘弹性材料的激光超声无损检测应用研究 [J]. 计算机时代, 2022 (10): 55-59.
|