Core Chinese Journal
Source Journal of CSCD
Source Journal for Chinese Scientific and Technical Papers
Core Journal of RCCSE
Included in JST China
Included in the Hierarchical Directory of High-quality Technical Journals in Architecture Science Field
Volume 53 Issue 9
Sep.  2023
Turn off MathJax
Article Contents
ZHANG Ailin, LIU Jie, JIANG Ziqin, GUO Kang, SU Shijia. Seismic Performance Evaluation of Steel Frame-Support Structures Embedded with Double-Stage Prefabricated Buckling-Restrained Braces[J]. INDUSTRIAL CONSTRUCTION, 2023, 53(9): 54-61. doi: 10.13204/j.gyjzG23020102
Citation: ZHANG Ailin, LIU Jie, JIANG Ziqin, GUO Kang, SU Shijia. Seismic Performance Evaluation of Steel Frame-Support Structures Embedded with Double-Stage Prefabricated Buckling-Restrained Braces[J]. INDUSTRIAL CONSTRUCTION, 2023, 53(9): 54-61. doi: 10.13204/j.gyjzG23020102

Seismic Performance Evaluation of Steel Frame-Support Structures Embedded with Double-Stage Prefabricated Buckling-Restrained Braces

doi: 10.13204/j.gyjzG23020102
  • Received Date: 2023-02-01
    Available Online: 2023-11-08
  • In order to study the influence of the new double-yield-point prefabricated buckling-restrained braces with replaceable core on the seismic performance of the prefabricated steel frame-support structure, firstly the finite element software Perform-3D was used to establish the finite element models of ordinary braces, buckling-restrained braces and new double-yield-point prefabricated buckling-restrained braces with replaceable core and verified the accuracy of the modeling method. Then, on this basis, a finite element model of steel frame-support structure embedded with new double-yield-point buckling-restrained braces with replaceable core was established, and the seismic performances of ordinary steel frame structure, steel frame-ordinary braces structure, steel frame-buckling-restrained braces structure, and steel frame-support structure embedded with new double-yield-point braces were studied by elastoplastic time-history analysis method. The analysis results show that Perform-3D could accurately simulate ordinary steel braces, ordinary buckling-restrained braces and new double-yield-point prefabricated buckling-restrained braces with replaceable core. The steel frame-support structure embedded with the new double-yield-point prefabricated buckling-restrained braces is better than other structures in terms of the maximum interlayer displacement angle and the top layer displacement of the structure and the base shear force. The new double-yield-point prefabricated buckling-restrained braces with replaceable core play an important role under the action of earthquake, mainly through the new double-yield-point prefabricated buckling-restrained braces with replaceable core to consume energy. It indicates that the steel frame-support structure embedded with the new double-yield-point prefabricated buckling-restrained braces with replaceable core shows a good seismic performance.
  • loading
  • [1]
    魏丽红.房屋建筑结构抗震设计分析[J].中华民居(下旬刊),2014(5):58.
    [2]
    周福霖.工程结构减震控制[M].北京:地震出版社,1997.
    [3]
    饶建兵,刘林. 防屈曲支撑在加固钢筋混凝土框架中的应用[J]. 施工技术, 2014, 43(增刊1):131-132.
    [4]
    YOSHINO T, KARINO Y. Experimental study on shear wall with braces:part 2[C]//Architectural Institute of Japan.Tokyo:Japan:1971.
    [5]
    KIMURA K, YOSHIOKA K, TAKEDA T, et al. Tests on braces encased by mortar in-filled steel tubes[C]//Structural Engineering Section. Tokyo, Japan:1976.
    [6]
    INOUE K, SAWAISUMI S. Bracing design criterion of the reinforced concrete panel including unbonded steel diagonal braces[J]. Journal of Structural and Construction Engineering, 1992(432):41-49.
    [7]
    蔡克铨,黄彦智,翁崇兴. 双管式挫屈束制(屈曲约束)支撑之耐震行为与应用[J]. 建筑钢结构进展, 2005(3):1-8.
    [8]
    周云,钱洪涛,褚洪民,等.新型防屈曲耗能支撑设计原理与性能研究[J].土木工程学报,2009,42(4):64-71.
    [9]
    郭彦林,王小安,朱博莉,等.四角钢组合约束型防屈曲支撑的轴压试验研究[J].土木工程学报,2017,50(4):1-12

    ,115.
    [10]
    李国强,郭小康,孙飞飞,等. 屈曲约束支撑混凝土锚固节点力学性能试验研究[J]. 建筑结构学报,2012,33(3):89-95.
    [11]
    潘鹏,邓开来,脊晓光,等. GFRP-钢屈曲约束支撑力学性能试验研究[J]. 土木工程学报,2014,47(12):1-8.
    [12]
    万金国,杨凡,李文峰,等. 双屈服点免断裂屈曲约束支撑性能试验与数值模拟[J]. 建筑结构, 2013, 43(17):105-108.
    [13]
    韩强,贾振雷,王晓强,等.内嵌碟簧型自复位防屈曲支撑性能试验及其恢复力模型研究[J].工程力学,2018,35(6):144-150

    ,190.
    [14]
    胡宝琳,徐庆."类十字"双阶屈服屈曲约束支撑理论研究及数值分析[J].建筑钢结构进展,2022,24(1):98-107.
    [15]
    ZHANG A L, WANG H W, JIANG Z Q.Numerical simulation analysis of double yield points assembled buckling-restrained brace with replaceable inner core[J].Structures,2022(35):1278-1294.
    [16]
    胡大柱,李国强,孙飞飞,等.屈曲约束支撑铰接框架足尺模型模拟地震振动台试验[J].土木工程学报,2010,43(增刊1):520-525.
    [17]
    吴克川,陶忠,潘文,等.不同刚度比下防屈曲支撑钢筋混凝土框架抗震性能试验研究[J].建筑结构学报,2021,42(12):43-54.
    [18]
    MANSOUR N, CHRISTOPOULOS C, TREMBLAY R. Experimental validation of replaceable shear links for eccentrically braced steel[J]. Frames Journal of Structural Engineering, 2011, 137(10):1141-1152.
    [19]
    胡丹,周臻,苗建义,等. 自复位摩擦耗能支撑框架的抗震性能分析[J]. 土木工程与管理学报, 2014(3):28-33.
    [20]
    吴徽,张艳霞,张国伟,等. 防屈曲支撑作为可替换耗能元件抗震性能试验研究[J]. 土木工程学报,2013,46(11):30-36.
    [21]
    邱灿星,杜修力. 一种抗震性能化设计方法及在防屈曲支撑钢框架结构中的应用[J]. 工程力学, 2022, 39(11):63-72.
    [22]
    SHABACK B, BROWN T. Behaviour of square hollow structural steel braces with end connections under reversed cyclic axial loading[J]. Canadian Journal of Civil Engineering, 2003, 30(4):745-753.
    [23]
    中华人民共和国住房和城乡建设部. 建筑抗震设计规范:GB 50011-2010[S]. 2016版. 北京:中国建筑工业出版社, 2016.
    [24]
    Pacific Earthquake Engineering Research Center. PEER ground motion database[EB/OL].(2022-12-10)[2022-12-10]. https://ngawest2.berkeley.edu/.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views (75) PDF downloads(5) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return