EXPERIMENTAL RESEARCH ON SUPPRESSION OF DEBONDING IN FRRMC-PLATED RC BEAM AND SLAB ENDS BY USING OBLIQUE U-JACKET

FENG Baichuan; LIU Feng; FU Bing; HUANG Dongchao

doi:10.13204/j.gyjzG201903190009

Volume 51 Issue 4

Aug. 2021

Turn off MathJax

Article Contents

Article Navigation > INDUSTRIAL CONSTRUCTION > 2021 > 51(4): 189-193

FENG Baichuan, LIU Feng, FU Bing, HUANG Dongchao. EXPERIMENTAL RESEARCH ON SUPPRESSION OF DEBONDING IN FRRMC-PLATED RC BEAM AND SLAB ENDS BY USING OBLIQUE U-JACKET[J]. INDUSTRIAL CONSTRUCTION, 2021, 51(4): 189-193. doi: 10.13204/j.gyjzG201903190009

Citation:

FENG Baichuan, LIU Feng, FU Bing, HUANG Dongchao. EXPERIMENTAL RESEARCH ON SUPPRESSION OF DEBONDING IN FRRMC-PLATED RC BEAM AND SLAB ENDS BY USING OBLIQUE U-JACKET[J]. INDUSTRIAL CONSTRUCTION, 2021, 51(4): 189-193. doi: 10.13204/j.gyjzG201903190009

Citation:

PDF( 6466 KB)

EXPERIMENTAL RESEARCH ON SUPPRESSION OF DEBONDING IN FRRMC-PLATED RC BEAM AND SLAB ENDS BY USING OBLIQUE U-JACKET

doi: 10.13204/j.gyjzG201903190009

1.;
2. MOE Key Lab of Disaster Forecast and Control in Engineering, Jinan University, Guangzhou 510632, China

Received Date: 2020-10-20
Available Online: 2021-08-19

Abstract

Abstract

Fiber-reinforced polymer (FRP) composites are widely externally bonded on or near surface mounted into the tension side of reinforced concrete (RC) beams to enhance the flexural capacity. Such a technique becomes one of the mainstream techniques for the flexural strengthening of RC beams. FRP plated RC beams usually fail due to debonding failure in either intermediate crack induced debonding (IC debonding) or concrete cover debonding. The debonding failure usually occurs with the maximum strain of the FRP being only 20%~40% of its rupture strain, thus limiting the utilization of the high tensile strength of the materials. Appropriate anchorages can effectively suppress or delay the occurrence of the debonding failure, thus improving the strengthening efficiency and the utilization of the materials. The scholars at home and abroad have proposed different forms of anchoring measures, and their effects, durability, and construction complexity are different. The oblique U-jacket was proposed to suppress or mitigate the concrete cover debonding of RC beams. Four full-scale RC beams strengthened by FRP with or without end oblique U-jacket to identify the effect of the U-jacket on the suppression or mitigation of concrete cover debonding. The test results showed that the ultimate bearing capacity and ductility of the tested beams with externally bonded and near surface mounted reinforced concrete beams could be increased by 62.03% and 117.85%, 61.08% and 155.44%, respectively.
- reinforced concrete beams,
- flexural strengthening,
- concrete cover debonding,
- anchoraging,
- fiber-reinforced polymer composites

FullText(HTML)

References(11)

References

[1]	李荣,滕锦光,岳清瑞.FRP材料加固混凝土结构应用的新领域:嵌入式(NSM)加固法[J].工业建筑,2004,34(4):5-10.
[2]	陆洲导,皮锐,周激.FRP材料嵌入式加固技术[C]//第九届全国建筑物鉴定与加固改造学术会议论文集.2008:454-458.
[3]	TENG J G, SMITH S T, YAO J, et al.Intermediate Crack Induced Debonding in RC Beams and Slabs[J]. Constr Build Mater, 2003,17(6/7):447-462.
[4]	SMITH S T, TENG J G. Shear-Bending Interaction in Debonding Failures of FRP-Plated RC Beams[J]. Advances in Structural Engineering, 2003, 6(3):183-199.
[5]	PORNPONGSAROJ P, PIMANMAS A. Peeling Behaviour of Reinforced Concrete Beams Strengthened with CFRP Plates Under Various End Restraint Conditions[J]. Magazine of Concrete Research, 2004, 56(2):73-81.
[6]	FU B, TENG J G, CHEN J F, et al. Concrete Cover Separation in FRP-Plated RC Beams:Mitigation Using FRP U-Jackets[J]. Journal of Composites for Construction, 2016.DOI: 10.10611/(ASCE)CC.1943-5614.0000721.
[7]	周朝阳,刘君,许芃, 等. U型CFRP条带混锚加固混凝土梁抗剪试验[J].复合材料学报, 2018, 35(3):714-721.
[8]	AL-AMERY R, AL-MAHAIDI R. Coupled Flexural-Shear Retrofitting of RC Beams Using CFRP Straps[J]. Composite Structures, 2006, 75(1/2/3/4):457-464.
[9]	LEE J, LOPEZ M M. Characterization of FRP Uwrap Anchors for Externally Bonded FRP-Reinforced Concrete Elements:An Experimental Study[J]. Journal of Composites for Construction, 2016, 20(4).DOI: 10.1061/(ASCE)CC1943-5614.0000642.
[10]	BREñA S F, BRAMBLETT R M, WOOD S L, et al. Increasing Flexural Capacity of Reinforced Concrete Beams Using Carbon Fiber-Reinforced Polymer Composites[J]. ACI Structural Journal, 2003, 100(1):36-46.
[11]	COELHO M R, SENA-CRUZ J M,NEVES LA.A Review on the Bond Behavior of FRP NSM Systems in Concrete[J/OL]. Construction and Building Materials, 2015,93:1157-1169.https://doi.org/10.1016/j.conbuildmat.2015.05.010.