Source Journal of Chinese Scientific and Technical Papers
Included as T2 Level in the High-Quality Science and Technology Journals in the Field of Architectural Science
Core Journal of RCCSE
Included in the CAS Content Collection
Included in the JST China
Indexed in World Journal Clout Index (WJCI) Report
Volume 51 Issue 6
Oct.  2021
Turn off MathJax
Article Contents
Abstract
References
Article Navigation >  INDUSTRIAL CONSTRUCTION  > 2021  >  51(6): 36-41,94
Wang Xiaohan, Liu Bingkang, Lu Guo1 Chen Lihua, . EXPERIMENTAL STUDY ON SEISMIC BEHAVIOR OF RECYCLED CONCRETE MEMBERS SUBJECT TO REVERSED MOMENT,SHEAR AND TORSION[J]. INDUSTRIAL CONSTRUCTION, 2012, 42(4): 21-24,117. doi: 10.13204/j.gyjz201204005
Citation: ZHANG Qian, DU Caixia, ZHANG Peng, CAI Jianguo, FENG Jian. RESEARCH ON AXIAL COMPRESSION PERFORMANCE OF 3D PRINTED CONCRETE WALL[J]. INDUSTRIAL CONSTRUCTION, 2021, 51(6): 36-41,94. doi: 10.13204/j.gyjzG20121501
shu

RESEARCH ON AXIAL COMPRESSION PERFORMANCE OF 3D PRINTED CONCRETE WALL

doi: 10.13204/j.gyjzG20121501

  • National Prestress Engineering Research Center, Southeast University, Nanjing 211189, China

  • Received Date: 2020-12-15
    Available Online: 2021-10-27
    Abstract
  • Building industrialization and construction intelligence have become the current development trend. With the application of 3D printing technique in the construction field, the mechanical properties of 3D printed components need to be further studied. As one of the main components, mechanical properties of the wall are crucial to the performance of printed buildings under vertical load. Therefore, eight 3D printed concrete walls were designed with different section forms and material strengths, and the axial compression test was carried out. It was found that the two ends of printing walls were the main parts subjected to the external loads, and the failure began at both ends. The arrangement of ribs in the 3D printed wall could enhance the connection between the two wallboards, improve the integrity of the wall and enhance the bearing capacity of the 3D printed wall. The printed wall with higher cement strength had higher section stiffness, smaller vertical displacement and higher cracking load.
    • FullText(HTML)
    • References(21)
  • [1]
    NGO T D, KASHANI A, IMBALZANO G, et al. Additive Manufacturing (3D Printing):A Review of Materials, Methods, Applications and Challenges[J]. Composites Part B:Engineering, 2018,143:172-196.
    [2]
    马敬畏,蒋正武,苏宇峰.3D打印混凝土技术的发展与展望[J].混凝土世界,2014(7):41-46.
    [3]
    丁烈云,徐捷,覃亚伟.建筑3D打印数字建造技术研究应用综述[J].土木工程与管理学报,2015,32(3):1-10.
    [4]
    PAUL S C, VAN ZIJL G P A G, TAN M J, et al. A Review of 3D Concrete Printing Systems and Materials Properties:Current Status and Future Research Prospects[J]. Rapid Prototyping Journal, 2018,24(4):784-798.
    [5]
    PANDA B, TAY Y W D, PAUL S C, et al. Current Challenges and Future Potential of 3D Concrete Printing[J]. Materialwissenschaft and Werkstofftechnik, 2018,49(5):666-673.
    [6]
    朱彬荣,潘金龙,周震鑫,等. 3D打印技术应用于大尺度建筑的研究进展[J].材料导报,2018,32(23):4150-4159.
    [7]
    王香港,王申,贾鲁涛,等.3D打印混凝土技术在新冠肺炎防疫方舱中的应用[J].混凝土与水泥制品,2020(4):1-4,13.
    [8]
    张超,邓智聪,侯泽宇,等.混凝土3D打印研究进展[J].工业建筑,2020,50(8):16-21.
    [9]
    雷斌,马勇,熊悦辰,等.3D打印混凝土可塑造性能的研究[J].混凝土,2018(11):47-51.
    [10]
    涂巧毓,凃刚.3D打印混凝土材料的流动性的探讨[J].城市道桥与防洪,2020(1):37-39,10.
    [11]
    汪群,高超.PVA纤维在3D打印混凝土中的应用研究[J].低温建筑技术,2019,41(4):3-6.
    [12]
    晏娟,戴兴健,刘维胜,等.再生骨料微粉对3D打印水泥基材料强度的影响[J].贵州师范大学学报(自然科学版),2020,38(6

    ):81-85.
    [13]
    KHOSHNEVIS B. Automated Construction by Contour Crafting-Related Robotics and Information Technologies[J]. Automation in Construction, 2004,13(1):5-19.
    [14]
    LIM S, BUSWELL R A, LE T T, et al. Developments in Construction-Scale Additive Manufacturing Processes[J]. Automation in Construction, 2012,21:262-268.
    [15]
    MEHMET S, YUSUF C K. 3D Printing of Buildings:Construction of the Sustainable Houses of the Future by BIM[J]. Energy Procedia, 2017,134:702-711.
    [16]
    VIKTOR M, VENKATESH N N, FRANK W, et al. Large-Scale Digital Concrete Construction-CONPrint3D Concept for On-Site, Monolithic 3D-Printing[J]. Automation in Construction, 2019,107:29-33.
    [17]
    李志远,陈欢欢.3D打印建筑的设备与材料探讨[J].建筑机械化,2018,39(11):17-19.
    [18]
    徐正国. 机械臂3D打印混凝土建造[J].建筑技艺,2018(8):36-37.
    [19]
    ASPRONE D, AURICCHIO F, MENNA C, et al. 3D Printing of Reinforced Concrete Elements:Technology and Design Approach[J]. Construction and Building Materials, 2018,165:218-231.
    [20]
    葛杰,白洁,杨燕,等.3D打印结构柱偏压性能试验研究[J].建筑材料学报,2019,22(3):424-430.
    [21]
    葛杰,白洁,杨燕,等.3D打印配筋砌体墙承载力试验研究[J].建筑材料学报,2020,23(2):414-420.
    • Relative Articles

  • Relative Articles

    [1]WU Lei, KANG Qiang, WAN Zhiming. EXPERIMENTAL RESEARCH ON MECHANICAL PROPERTIES OF PRINTED TRUSS-TYPE REINFORCED CONCRETE BEAM[J]. INDUSTRIAL CONSTRUCTION, 2021, 51(6): 24-28. doi: 10.13204/j.gyjzG20122904
    [4]Xie Yongping, Jia Lei. SIZE EFFECT OF NORMAL SECTION BEARING CAPACITY OF REINFORCED CONCRETE COLUMNS[J]. INDUSTRIAL CONSTRUCTION, 2014, 44(10): 71-76. doi: 10.13204/j.gyjz201410015
    [5]Li Qingning, Li Yujun, Jiang Weishan, Wei Wei, Zheng Xianchao. STUDY ON THE SEISMIC BEHAVIOR AND NORMAL SECTION BEARING CAPACITY CALCULATION OF THE JOINTS OF LOCAL ENCASED STEEL TUBULAR ASSEMBLY COLUMN[J]. INDUSTRIAL CONSTRUCTION, 2014, 44(10): 77-81. doi: 10.13204/j.gyjz201410016
    [6]Wang Xiaohan, Gu Dongsheng, Wang Guoyan. CALCULATION ON FLEXURAL CAPACITY OF NORMAL SECTION OF RC CIRCULAR MEMBERS UNDER ECCENTRIC LOAD[J]. INDUSTRIAL CONSTRUCTION, 2011, 41(11): 66-70. doi: 10.13204/j.gyjz201111014
    [7]Dong Chunmin, Lin Xinyan, Lian Jin. BILATERAL SHEAR STRENGTH OF RECTANGULAR FRAME COLUMN UNDER EARTHQUAKE[J]. INDUSTRIAL CONSTRUCTION, 2011, 41(4): 26-29,65. doi: 10.13204/j.gyjz201104006
    [8]Yuan Lili, Wang Jianmin, Zhao Yajun, Yang Chengwen. EXPERIMENT AND ANALYSIS ON MECHANICAL PROPERTIES OF REINFORCED CERAMSITE CONCRETE BEAM AFTER FIRE[J]. INDUSTRIAL CONSTRUCTION, 2011, 41(4): 71-74. doi: 10.13204/j.gyjz201104016
    [9]Bai Xiaohong, Bai Guoliang. EXPERIMENTAL AND THEORETICAL STUDY ON THE DEFORMATION PROPERTY OF THE FRAME-BENT STRUCTURE[J]. INDUSTRIAL CONSTRUCTION, 2010, 40(7): 31-35. doi: 10.13204/j.gyjz201007010
    [10]Guo Zhanggen, Cao Shuangyin, Wang Anbao, Sun Weimin, Han Baoquan. EXPERIMENTAL STUDY AND BEARING CAPACITY ANALYSIS OF RC TWO-WAY SLABS STRENGTHENED WITH FRP STRIPS[J]. INDUSTRIAL CONSTRUCTION, 2009, 39(8): 20-24,19. doi: 10.13204/j.gyjz200908006
    [11]Zhao Tongfeng, Wang Lianguang. CAPACITY ANALYSIS OF PURE BENDING OF SQUARE STEEL TUBE FILLEDWITH STEEL-REINFORCED HIGH-STRENGTH CONCRETE[J]. INDUSTRIAL CONSTRUCTION, 2008, 38(3): 27-30. doi: 10.13204/j.gyjz200803008
    [12]An Ming-liang. EXPERIMENTAL STUDIES ON BENDING LOAD CAPACITY OF RC BEAM STRENGTHENED WITH CFRP PLATE[J]. INDUSTRIAL CONSTRUCTION, 2006, 36(10): 43-45. doi: 10.13204/j.gyjz200610013
    [13]Qin Fu-hua, Shao Yong-jian, Xu Jia-xiu, Cai Hua. EXPERIMENTAL RESEARCH ON CRACKING AND RIGIDITY OF HIGH-STRENGTH LIGHT-WEIGHT AGGREGATE CONCRETE BEAMS[J]. INDUSTRIAL CONSTRUCTION, 2006, 36(8): 82-85. doi: 10.13204/j.gyjz200608025
    [14]Xue Ping. COMPUTATIONAL METHOD OF BEARING CAPACITY OF BENDING NORMAL SECTION OF REINFORCED CONCRETE BEAM WITH RECTANGULAR SECTION STRENGTHENED BY CFRP[J]. INDUSTRIAL CONSTRUCTION, 2004, 34(5): 76-77,90. doi: 10.13204/j.gyjz200405024
    [15]Zheng Guodong, Hou Faliang. EFFECT OF SECONDARY LOADING ON CALCULATION RESULTS OF NORMAL SECTION'S ULTIMATE BEARING CAPACITY OF RC BEAMS STRENGTHENED WITH CFRP[J]. INDUSTRIAL CONSTRUCTION, 2004, 34(5): 73-75. doi: 10.13204/j.gyjz200405023
    • Supplements(0)
    • Cited By

  • Cited by

    Periodical cited type(1)

    1. 速佑强，宫凤强，罗松，刘志祥. 二维等围压压缩下花岗岩的能量存储和耗散特征试验研究（英文）. Journal of Central South University. 2021(03): 848-865 .

    Other cited types(3)

  • Created with Highcharts 5.0.7Amount of accessChart context menuAbstract Views, HTML Views, PDF Downloads StatisticsAbstract ViewsHTML ViewsPDF Downloads2024-052024-062024-072024-082024-092024-102024-112024-122025-012025-022025-032025-040246810
    Created with Highcharts 5.0.7Chart context menuAccess Class DistributionFULLTEXT: 11.6 %FULLTEXT: 11.6 %META: 88.4 %META: 88.4 %FULLTEXTMETA
    Created with Highcharts 5.0.7Chart context menuAccess Area Distribution其他: 9.8 %其他: 9.8 %China: 2.9 %China: 2.9 %北京: 6.9 %北京: 6.9 %南京: 0.6 %南京: 0.6 %南阳: 0.6 %南阳: 0.6 %天津: 0.6 %天津: 0.6 %威海: 0.6 %威海: 0.6 %巴中: 0.6 %巴中: 0.6 %常德: 0.6 %常德: 0.6 %广州: 1.7 %广州: 1.7 %廊坊: 0.6 %廊坊: 0.6 %张家口: 2.9 %张家口: 2.9 %扬州: 1.1 %扬州: 1.1 %无锡: 0.6 %无锡: 0.6 %昆明: 0.6 %昆明: 0.6 %晋城: 0.6 %晋城: 0.6 %朝阳: 0.6 %朝阳: 0.6 %武汉: 1.1 %武汉: 1.1 %沈阳: 0.6 %沈阳: 0.6 %淄博: 1.7 %淄博: 1.7 %漯河: 1.7 %漯河: 1.7 %石家庄: 1.1 %石家庄: 1.1 %芒廷维尤: 4.6 %芒廷维尤: 4.6 %芝加哥: 2.3 %芝加哥: 2.3 %西宁: 42.0 %西宁: 42.0 %西安: 2.9 %西安: 2.9 %贵阳: 0.6 %贵阳: 0.6 %运城: 6.3 %运城: 6.3 %邯郸: 0.6 %邯郸: 0.6 %郑州: 1.7 %郑州: 1.7 %重庆: 0.6 %重庆: 0.6 %长沙: 0.6 %长沙: 0.6 %其他China北京南京南阳天津威海巴中常德广州廊坊张家口扬州无锡昆明晋城朝阳武汉沈阳淄博漯河石家庄芒廷维尤芝加哥西宁西安贵阳运城邯郸郑州重庆长沙

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF
    XML

    Article Metrics

    Article views (151) PDF downloads(1) Cited by(4)
    Proportional views
    Related

    Journal Online

    Authors' Center

    Links

    Copyright © 《工业建筑》杂志社有限公司 京ICP备11033253号-1

    Supported by: Beijing Renhe Information Technology Co. Ltd     百度统计

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return