EFFECT OF BASALT FLAKE ON ADHESION OF COATING

ZHAO Jinjie; LI Jiaxing; YANG Yongxin; HE Jun; TANG Qihong; WANG Tao; LI Kun

doi:10.13204/j.gyjzG20051402

Volume 51 Issue 4

Aug. 2021

Turn off MathJax

Article Contents

Article Navigation > INDUSTRIAL CONSTRUCTION > 2021 > 51(4): 199-203

ZHAO Jinjie, LI Jiaxing, YANG Yongxin, HE Jun, TANG Qihong, WANG Tao, LI Kun. EFFECT OF BASALT FLAKE ON ADHESION OF COATING[J]. INDUSTRIAL CONSTRUCTION, 2021, 51(4): 199-203. doi: 10.13204/j.gyjzG20051402

Citation:

ZHAO Jinjie, LI Jiaxing, YANG Yongxin, HE Jun, TANG Qihong, WANG Tao, LI Kun. EFFECT OF BASALT FLAKE ON ADHESION OF COATING[J]. INDUSTRIAL CONSTRUCTION, 2021, 51(4): 199-203. doi: 10.13204/j.gyjzG20051402

Citation:

PDF( 2223 KB)

EFFECT OF BASALT FLAKE ON ADHESION OF COATING

doi: 10.13204/j.gyjzG20051402

1. Central Research Institute of Building and Construction Co., Ltd., MCC Group, Beijing 100088, China;
2. School of Civil Engineering, Chang'an University, Xi'an 710055, China;
3. China Institute of Building Standard Design & Research, Beijing 100048, China;
4. China Southwest Architectural Design and Research Institute Co., Ltd., Baoding 071700, China

Received Date: 2020-05-14
Available Online: 2021-08-19

Abstract

Abstract

The marine environment has very high requirements for the performance of anticorrosive coatings for steel structures, especially the adhesion between steel and coatings, which is the basis of anticorrosive coatings. The influence of flake type, flake content, flake particle size, curing agent type and curing agent proportion on coating adhesion was studied by conducting tests on 18 specimens and using epoxy resin as the substrate. The adhesion of the coating reached the maximum when the basalt flake content was 20%, the particle size was 400, the curing agent was polyamide, and the ratio of epoxy resin to polyamide was 2:1.
- coating,
- basalt flake,
- adhesion

FullText(HTML)

References(14)

References

[1]	陆晓东, 秦铁男. 海洋钢结构防腐涂料及其在天津港的应用[J].中国港湾建设, 2012(2):84-86.
[2]	李敏, 王秀娟, 刘宝成, 等. 海洋环境防腐蚀玻璃鳞片涂料的研制[J]. 涂料工业, 2010, 40(1):49-53.
[3]	孙超,贾梦秋.乙烯基酯树脂玻璃鳞片防腐涂料的性能研究[J].涂料工业,2012,42(7):19-22.
[4]	盖春涛. 玄武岩鳞片改性环氧涂料的制备及性能研究[D].哈尔滨:哈尔滨工程大学, 2016.
[5]	马强. 无机改性聚苯胺/环氧树脂涂层的制备和性能研究[D].天津:天津大学,2016.
[6]	HE P, WANG J, LU F, et al. Synergistic Effect of Polyaniline Grafted Basalt Plates for Enhanced Corrosion Protective Performance of Epoxy Coatings[J]. Progress in Organic Coatings, 2017, 110:1-9.
[7]	何佩. 聚苯胺、聚苯胺修饰玄武岩鳞片环氧涂层的制备与表征[D].天津:天津大学,2017.
[8]	HE P, WANG J X, MA Q, et al. Protective Property of Epoxy Coatings Containing Polyaniline and Laminar Basalt in Neutral, Alkaline, and Acidic Media[J]. Materials and Corrosion, 2017, 68(12):1355-1364.
[9]	崔向红, 张晓臣, 刘晓东, 等. 玄武岩鳞片在防腐防污涂料中的应用及发展[J].现代涂料与涂装,2018,21(4):25-26 ,39.
[10]	李明, 张海宽, 刘兰轩, 等. 环氧玻璃鳞片长效防腐涂料的制备[J].上海涂料,2012, 50(5):4-6.
[11]	吴宗汉, 段志新. 鳞片防腐涂料的性能及应用[J].现代涂料与涂装,2010, 13(7):21-24.
[12]	周立新,杨卓如,叶楚平,等.双组分水性环氧涂料固化成膜机理探讨[J].电镀与涂饰,2009,28(2):43-45.
[13]	吕荣华,张博晓,余飞.水性环氧防腐涂料的制备及性能研究[J].广州化工,2019,47(11):60-62.
[14]	张万波.涂料在饮用水容器防腐工程中的应用[J].武汉造船,2000(1):23-26.