EXPERIMENTAL RESEARCH AND FINITE ELEMENT ANALYSIS ON MECHANICAL PERFORMANCE OF TRUSS WITH ROTARY DISH-TYPE FASTENER

Wang Tiecheng  Li Dongyang  Zhao Hailong  Li Qinshan  Wang Yuan  Li Guoyao

doi:10.13204/j.gyjz201507027

Volume 45 Issue 7

Sep. 2015

Turn off MathJax

Article Contents

Abstract

References

Article Navigation > INDUSTRIAL CONSTRUCTION > 2015 > 45(7): 132-137

Wang Tiecheng Li Dongyang Zhao Hailong Li Qinshan Wang Yuan Li Guoyao, . EXPERIMENTAL RESEARCH AND FINITE ELEMENT ANALYSIS ON MECHANICAL PERFORMANCE OF TRUSS WITH ROTARY DISH-TYPE FASTENER[J]. INDUSTRIAL CONSTRUCTION, 2015, 45(7): 132-137. doi: 10.13204/j.gyjz201507027

Citation:

Wang Tiecheng Li Dongyang Zhao Hailong Li Qinshan Wang Yuan Li Guoyao, . EXPERIMENTAL RESEARCH AND FINITE ELEMENT ANALYSIS ON MECHANICAL PERFORMANCE OF TRUSS WITH ROTARY DISH-TYPE FASTENER[J]. INDUSTRIAL CONSTRUCTION, 2015, 45(7): 132-137. doi: 10.13204/j.gyjz201507027

Citation:

Wang Tiecheng Li Dongyang Zhao Hailong Li Qinshan Wang Yuan Li Guoyao, . EXPERIMENTAL RESEARCH AND FINITE ELEMENT ANALYSIS ON MECHANICAL PERFORMANCE OF TRUSS WITH ROTARY DISH-TYPE FASTENER[J]. INDUSTRIAL CONSTRUCTION, 2015, 45(7): 132-137. doi: 10.13204/j.gyjz201507027

PDF( 0 KB)

EXPERIMENTAL RESEARCH AND FINITE ELEMENT ANALYSIS ON MECHANICAL PERFORMANCE OF TRUSS WITH ROTARY DISH-TYPE FASTENER

doi: 10.13204/j.gyjz201507027

Wang Tiecheng Li Dongyang Zhao Hailong Li Qinshan Wang Yuan Li Guoyao,

Publish Date: 2015-07-20

Abstract

Abstract

The full-scale test of the truss with rotary dish-type fastener was carried out． Based on the test numerical model of the truss with rotary dish-type fastener，the three dimension finite element model was established and the finite element analysis was carried on by finite element software． It indicated that the truss had higher strength，the stress and displacement of the truss present symmetric，the connecting gap of the chord bar had great influence on the displacement of the truss and the stress of the chord bar，and the computation value coincided well with the experimental value which meant geometrical modeling and mesh-plotting were proper and feasible． It found that the maximum deflection and maximum bearing capacity of the truss appeared in the third stage，which met the requirements in the process of section construction．
- rotary dish-type,
- silo top,
- truss,
- displacement,
- stress

FullText(HTML)

References(0)

References

Relative Articles

[1]	YANG Xinyu, YU Xian, ZHANG Ming, FAN Haodong, LI Wenlong, LIU Nanfeng, YU Zhixiang, LIU Changliang, CHEN Shuwei, ZHAO Shixing. Static Bending Test of Bamboo Scrimber Solid Web Beams and Trusses[J]. INDUSTRIAL CONSTRUCTION, 2025, 55(2): 52-59. doi: 10.3724/j.gyjzG24111103
[2]	LIN Sen, XUE Huajun, ZHANG Yuanjian. DEFORMATION CONTROL OF PILE FOUNDATIONS FOR A LONG-SPAN CABLE-STAYED BRIDGE UNDER CONSTRUCTION OF A LIGHT RAIL STATION WITH THE PILE-BEAM-ARCH METHOD[J]. INDUSTRIAL CONSTRUCTION, 2021, 51(2): 206-210,198. doi: 10.13204/j.gyjzG20092701
[3]	ZHANG Guangcan, CHEN Hao, LIU Zengfu, ZHANG Hao. ANALYSIS OF CAUSES OF STEEL TRUSS COLLAPSE IN A STOCKYARD[J]. INDUSTRIAL CONSTRUCTION, 2021, 51(12): 113-116. doi: 10.13204/j.gyjzG21120610
[4]	BAI Wenfeng, YUAN Yuan, SU Hexian, ZHONG Yixian. EXPERIMENTAL RESEARCH ON BEARING CAPACITY OF JOIST CONSISTING OF ORTHOGONAL OBLIQUE PLACEMENT BAMBOO STRIPS AND A WOODEN FRAME[J]. INDUSTRIAL CONSTRUCTION, 2021, 51(4): 105-110. doi: 10.13204/j.gyjzG20021002
[5]	DU Erfeng, ZHOU Xiongliang, QIN Le, HE Yunfei, SHU Ganping, ZHOU Guangen. EXPERIMENTAL RESEARCH ON FIRE RESISTANCE OF DOUBLE-SKIN MULTI-CAVITY COMPOSITE WALL WITH STEEL TRUSS EXPOSED TO ONE-SIDE FIRE[J]. INDUSTRIAL CONSTRUCTION, 2020, 50(3): 24-28. doi: 10.13204/j.gyjz202003005
[6]	Li Xiaofen Liu Lixin Zhang Huipeng, . EXPERIMENTAL STUDY OF FATIGUE BEHAVIOR OF THE PRESTRESSED CONCRETE BEAMS WITH PRETENSIONED BENT-UP TENDONS[J]. INDUSTRIAL CONSTRUCTION, 2015, 45(7): 95-101. doi: 10.13204/j.gyjz201507020
[7]	Li Qinshan, Wang Tiecheng, Zhao Hailong, Wang Wenxing. THE ANALYSIS AND COMPARISON OF MECHANICAL PERFORMANCE OF TWO KINDS OF SILO HORIZONTAL SUPPORTING STRUCTURE[J]. INDUSTRIAL CONSTRUCTION, 2015, 45(4): 143-146. doi: 10.13204/j.gyjz201504027
[8]	Li Qinshan, Wang Tiecheng, Zhao Hailong. THE SAFETY ANALYSIS OF SUSPENSION SUPPORT TRUSS ON TOP OF LARGE-DIAMETER SILO UNDER CONCRETE CONSTRUCTION[J]. INDUSTRIAL CONSTRUCTION, 2015, 45(1): 143-147. doi: 10.13204/j.gyjz201501029
[9]	Yin Jiang, Hu Qigao, Li Peng. THE INFLUENCE OF VERTICAL EFFECT OF NEAR-FAULT EARTHQUAKE ON DISPLACEMENT DEMAND OF STRUCTURES[J]. INDUSTRIAL CONSTRUCTION, 2013, 43(6): 60-66. doi: 10.13204/j.gyjz201306014
[10]	Du Yongfeng, Wu Zhongtie, Fan Pingping. ANALYSIS OF STRESS AND DEFORMATION OF LAMINATED RUBBER BEARING CONNECTED WITH THE RC COLUMNS UNDER EARTHQUAKE[J]. INDUSTRIAL CONSTRUCTION, 2012, 42(3): 39-42,132. doi: 10.13204/j.gyjz201203007
[11]	Lu Kunlin, Zhu Dayong, Yang Yang. RESEARCH ON EARTH PRESSURE CONSIDERING DISPLACEMENT AND SOIL ARCHING[J]. INDUSTRIAL CONSTRUCTION, 2011, 41(5): 88-92. doi: 10.13204/j.gyjz201105020
[12]	Xu Dian, Yang Youfa, Deng Yanhua. STUDY ON TRUSS DAMAGES DETECTION BASED ON DYNAMIC AND STATIC COMBINING METHOD[J]. INDUSTRIAL CONSTRUCTION, 2011, 41(7): 21-25. doi: 10.13204/j.gyjz201107005
[13]	Chen Shaojie, Duan Jingmin, Zhao Hongbo. THE IMPROVED ANT COLONY ALGORITHM BASED ON THE OPTIMAL DESIGN OF TRUSS STRUCTURE[J]. INDUSTRIAL CONSTRUCTION, 2010, 40(1): 55-58,101. doi: 10.13204/j.gyjz201001015
[14]	Tu Yongming, LüZhitao. RESEARCH ON THE EXPERIMENT OF PRESTRESSED CONCRETE STRUCTURES IN CARBONATION ENVIRONMENT AND THE PREDICTION MODEL OF CARBONATION DEPTH[J]. INDUSTRIAL CONSTRUCTION, 2006, 36(1): 47-50. doi: 10.13204/j.gyjz200601015
[15]	Jiang Li, Chen Lun. ANALYTICAL SOLUTION FOR THE LOAD-DISPLACEMENT RELATIONSHIP OF PULLOUT DX PILE BASED ON ELASTIC THEORY[J]. INDUSTRIAL CONSTRUCTION, 2006, 36(5): 65-70. doi: 10.13204/j.gyjz200605018
[16]	Xie Jian-zhong, Zhang Lei. OPTIMIZATION DESIGN OF ROOF TRUSS FOR INDUSTRIAL MILL BUILDINGS[J]. INDUSTRIAL CONSTRUCTION, 2006, 36(6): 17-20. doi: 10.13204/j.gyjz200606007
[17]	Yue Qiang, Xiao Hongtian, Li Bo. BOUNDARY ELEMENT ANALYSIS OF STRESS AND DISPLACEMENT FIELD IN LAYERED SOIL[J]. INDUSTRIAL CONSTRUCTION, 2006, 36(12): 52-55. doi: 10.13204/j.gyjz200612015
[18]	Liu Qijian, Yang Linde. ANALYSIS OF VERTICAL BEARING CAPACITY AND DISPLACEMENT BY THE SETTLEMENT OF PILE TOP[J]. INDUSTRIAL CONSTRUCTION, 2005, 35(3): 35-37. doi: 10.13204/j.gyjz200503014
[19]	Tu Yongming, LüZhitao. THE EXPERIMENTAL RESEARCH ON PRESTRESSED CONCRETE STRUCTURE UNDER SALT FOG CORROSION ENVIRONMENT[J]. INDUSTRIAL CONSTRUCTION, 2004, 34(5): 1-3,10. doi: 10.13204/j.gyjz200405001
[20]	Zhu Yifeng, Li Ce, Feng Jian. USE OF PRESTRESSED TRUSS IN POINT SUPPORTED GLASS CURTAIN WALL[J]. INDUSTRIAL CONSTRUCTION, 2004, 34(9): 78-80. doi: 10.13204/j.gyjz200409023

Supplements(0)

Cited By

Cited by

Periodical cited type(3)

1.	孟文清，白松，张亚鹏，崔邯龙，倪时华. 筒仓模块化穹顶式滑模刚性平台单榀足尺试验研究. 煤炭工程. 2023(01): 41-46 .
2.	张美伶，申红梅. 国家速滑馆建筑机电安装工程成本控制研究. 煤炭工程. 2023(02): 188-192 .
3.	肖树豪，赵海龙，李勤山，李国耀. 大直径筒仓仓顶施工支撑体系优化分析. 工业建筑. 2018(05): 139-143 . 本站查看