CONTRAST TEST BETWEEN GEOFABRIC-COMPOSITE BOLT AND TRADITIONAL BOLT IN THE CATACLASTIC ROCK

Zhang Yanjun; Wang Chaoxiong; Zhang Rong; Xiao Yucheng

doi:10.13204/j.gyjz201305019

Volume 43 Issue 5

Dec. 2014

Turn off MathJax

Article Contents

Article Navigation > INDUSTRIAL CONSTRUCTION > 2013 > 43(5): 90-93

Zhang Yanjun, Wang Chaoxiong, Zhang Rong, Xiao Yucheng. CONTRAST TEST BETWEEN GEOFABRIC-COMPOSITE BOLT AND TRADITIONAL BOLT IN THE CATACLASTIC ROCK[J]. INDUSTRIAL CONSTRUCTION, 2013, 43(5): 90-93. doi: 10.13204/j.gyjz201305019

Citation:

Zhang Yanjun, Wang Chaoxiong, Zhang Rong, Xiao Yucheng. CONTRAST TEST BETWEEN GEOFABRIC-COMPOSITE BOLT AND TRADITIONAL BOLT IN THE CATACLASTIC ROCK[J]. INDUSTRIAL CONSTRUCTION, 2013, 43(5): 90-93. doi: 10.13204/j.gyjz201305019

Citation:

PDF( 0 KB)

CONTRAST TEST BETWEEN GEOFABRIC-COMPOSITE BOLT AND TRADITIONAL BOLT IN THE CATACLASTIC ROCK

doi: 10.13204/j.gyjz201305019

1.
Wuhan Surveying-Geotechnical Research Institute of China Metallurgical Science and Industry Group,Wuhan 430080,China

Received Date: 2012-09-18
Publish Date: 2013-05-20

Abstract

Abstract

Geofabric-composite bolt is a new anchoring reinforcement structure used in cataclasite.A landslide control project was used as a platform to carry out pull-out test of two sorts an chorsfull length bonded and prestressed anchors, to verify the feasibility of using geofabric-composite bolt to strengthen cataclasite.The field test results showed that geofabric-composite bolt could solve the problem of grouting-mud leakage in cataclasite.The data regression analysis showed that reinforced effect and ballooning effect of geofabric could adjust the interface stress between anchoring body and cataclasite and the pollout force of the anchoring system was improved.
- cataclastic rock,
- geofabric-composite bolt,
- full length bonded,
- prestressed,
- pull-out test