Citation: | Zhao Dong, Zhang Chenghua, Huang Wei, Zhang Wenyin. ULTIMATE CAPACITY ANALYSIS OF ECO-COMPOSITE WALL[J]. INDUSTRIAL CONSTRUCTION, 2012, 42(11): 56-59. doi: 10.13204/j.gyjz201211013 |
[2] 陈国新,黄炜,姚谦峰,等.基于统一强度理论的生态复合墙体等效斜压杆宽度计算[J].工程力学,2010,27(2): 90-95.
|
黄炜,张程华,姚谦峰,等.密肋壁板结构简化计算模型对比分析[J].振动与冲击,2009,28(7): 187-191.
|
[3] 孙静,姚谦峰.密肋复合墙体复合材料等效弹性板模型研究[J].大连理工大学学报,2009,49(3): 427-431.
|
[4] 季静,韩小雷,郑宜,等.基于能力设计原理的双肢剪力墙极限承载力研究[J].地震工程与工程振动,2006,26(4): 114 -120.
|
[5] 陈国栋,郭彦林.十字加劲钢板剪力墙的抗剪极限承载力[J].建筑结构学报,2004,25(1): 71-78.
|
[6] 黄双华,黄雄军.劲性混凝土带边框低剪力墙极限承载力的计算[J].西南交通大学学报,2001,36(4): 360-364.
|
[7] 姚谦峰,黄炜,田洁,等.密肋复合墙体受力机理及抗震性能试验研究[J].建筑结构学报,2004,25(6): 67-74.
|
[8] Makoto Mochizuki,Norikazu Onozato,Masao Takehara,et al.Analytical Accuracy of Maximum Strengths of Reinforced Concrete Framed Shear Walls by Macroscopic Models [J].Concrete Research and Technology,JCI,2003,14(2): 11-21.
|
[9] 张大长,陈怀亮,卢中强.基于抗剪抵抗机构的无开洞RC 剪力墙的极限承载力分析模型的探讨[J].工程力学,2007(7):142-147.
|
[10] 张大长,陈怀亮,卢中强.基于抗剪抵抗机构的RC 开洞剪力墙极限承载力分析[J].土木工程学报,2008,41(11): 44-49.黄炜,姚谦峰,章宇明,等.内填砌块的密肋复合墙体极限承载力计算[J].土木工程学报,2006,39(3):68-75.
|
[11] Salonikios T N,Kappos A J,Tegos I A.Cyclic Loadbehavior of Low-Slenderness Reinforced Concrete walls: Failure Modes.Strength and Deformation Analysis,and Design Implication[J].ACI Structure Journal,2000,97(1): 132-141.
|
[12] Christian Greifenhagen,Pierino Lestuzzi.Static Cyclic Tests on Lightly Reinforced Concrete Shear Walls [J].Engineering Structures,2005,27(11): 1703-1712.
|
[13] Salonikios T N,Kappos A J,Tegos I A.Cyclic Load Behavior of Low-Slenderness Reinforced Concrete Walls: Design Basis and Test Results[J].ACI Structure Journal,1999,96(4): 649-660.
|