EXPERIMENTAL STUDY ON RESIDUAL STRESS OF AUSTENITIC STAINLESS STEEL 316 IN FABRICATED I- SECTIONS

Wang Yuanqing; Guan Jian; Zhang Yong; Shi Yongjiu; Yang Lu

doi:10.13204/j.gyjz2011205007

Volume 42 Issue 5

Dec. 2014

Turn off MathJax

Article Contents

Article Navigation > INDUSTRIAL CONSTRUCTION > 2012 > 42(5): 45-50,44

Wang Yuanqing, Guan Jian, Zhang Yong, Shi Yongjiu, Yang Lu. EXPERIMENTAL STUDY ON RESIDUAL STRESS OF AUSTENITIC STAINLESS STEEL 316 IN FABRICATED I- SECTIONS[J]. INDUSTRIAL CONSTRUCTION, 2012, 42(5): 45-50,44. doi: 10.13204/j.gyjz2011205007

Citation:

Wang Yuanqing, Guan Jian, Zhang Yong, Shi Yongjiu, Yang Lu. EXPERIMENTAL STUDY ON RESIDUAL STRESS OF AUSTENITIC STAINLESS STEEL 316 IN FABRICATED I- SECTIONS[J]. INDUSTRIAL CONSTRUCTION, 2012, 42(5): 45-50,44. doi: 10.13204/j.gyjz2011205007

Citation:

PDF( 0 KB)

EXPERIMENTAL STUDY ON RESIDUAL STRESS OF AUSTENITIC STAINLESS STEEL 316 IN FABRICATED I- SECTIONS

doi: 10.13204/j.gyjz2011205007

1.
1. Key Laboratory of Civil Engineering Safety and Durability of China Education Ministry,Department of Civil Engineering,Tsinghua University,Beijing 100084,China;
2.
2. School of Civil Engineering,Beijing Jiaotong University,Beijing 100044,China;
3.
3. College of Architecture and Civil Engineering,Beijing University of Technology,Beijing 100124,China

Received Date: 2011-12-20
Publish Date: 2012-05-20

Abstract

Abstract

The applications of stainless steel in construction increase gradually,including the stainless steel roof structure,the stainless steel bridge,the stainless steel wall etc.Nowadays there are few researches on the mechanical property of stainless steel,of which the residual stress from welding is an important aspect of the welding effect on stainless steel components,while the distribution law of residual stress for stainless steel becomes an urgent subject. In this paper an experimental study on the residual stress of the Austenitic stainless steel 316(06Cr17Ni12Mo2) is conducted including 6 types of sections.Through the analysis of the test results,the value and the distribution law of the residual stress are given,serving a base for further study on the effect of the residual stress on stainless steel components．
- stainless steel,
- I-section,
- residual stress,
- experimental study,
- sectioning method

FullText(HTML)

References(15)

References

[2] 王元清，袁焕鑫，石永久，等. 不锈钢结构的应用和研究现状[J]. 钢结构，2010，25(2): 1-12.

Baddoo N R. Stainless Steel in Construction: A Review of Research，Applications，Challenges and Opportunities[J]. Journal of Constructional Steel Research，2008，64(11): 1199-1206.

[3] Gardner L，Cruise R B. Modeling of Residual Stress in Structural Stainless Steel Sections[J]. Journal of Structural Engineering，2009，135(1): 42-53.

[4] EN 1993-1-4. Eurocode 3: Design of Steel Structures-Part 1-4:General Rules-Supplementary Rules for Stainless Steels[S]. 2006.

[5] ASCE. Specification for the Design of Cold-Formed Stainless Steel Structural Members[S]. SEI/ASCE 8-02(Standard No. 02-008). American Society of Civil Engineers，2002.

[6] AS/NZS 4673: 2001. Cold Formed Stainless Steel Structures[S]. 2001.

[7] The Design and Construction Standards for Stainless Steel Structures[S]. Stainless Steel Building Association of Japan，1995.

[8] Ashral M，Gardner L，Nethercot D A. Finite Element Modeling of Structural Stainless Steel Cross Sections[J]. Journal of Thin Walled Structures，2006，44:1048-1062.

[9] 高博. 焊接工字形不锈钢受弯构件变形性能及稳定性研究[D]. 重庆: 重庆大学，2011.

[10] 王国周. 钢结构残余应力分布的若干特点[J]. 工业建筑，1981，11(8):31-35，20.

[11] 班慧勇，施刚，邢海军，等. Q420 等边角钢轴压杆稳定性能研究(I)[J]. 土木工程学报，2010，43(7): 14-21.

[12] Tebedge N，Alpsten G，Tall L. Residual-Stress Measurement by the Sectioning Method[J]. Experimental Mechanics，1973，13 (2): 88-96.

[13] 王国周，赵家齐. 焊接与热轧工字钢残余应力的测定[J]. 工业建筑，1986，16(7): 32-37.

[14] Gardner L. A New Approach to Stainless Steel Structural Design[D ]. London: Department of Civil and Environmental Engineering，Imperial College，2002.

[15] Cruise R B，Gardner L. Residual Stress Analysis of Structural Stainless Steel Sections[J]. Journal of Constructional Steel Research，2008，66(3): 352-366.

Relative Articles

Supplements(0)

Cited By

Proportional views